Adjust volume on iphone

Customize headphone audio levels on your iPhone or iPad

Amplify soft sounds and adjust certain frequencies for your hearing needs with Headphone Accommodations in iOS and iPadOS 14 and later.

Headphone Accommodations works with these headphones:

• AirPods (3rd generation)
• AirPods Max
• Apple EarPods (with 3.5 mm Headphone Plug or Lightning Connector)
• AirPods (2nd generation)
• AirPods Pro
• Powerbeats
• Powerbeats Pro
• Beats Solo Pro
• Beats Fit Pro

When using automatic device switching with your AirPods, your custom audio settings will transfer between your iPhone, your iPad, and your paired Apple Watch (on watchOS 7), but they won’t transfer to your Mac.

Set up Headphone Accommodations

1. Check that you have the latest version of iOS or iPadOS.
2. Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations. Turn on Headphone Accommodations.
3. Choose how you want to apply your custom audio settings:
   • Turn on Phone to apply these settings to phone calls, FaceTime calls, and any third-party video call apps.
   • Turn on Media to apply these settings to music, movies, podcasts, audiobooks, Siri, voicemail, and Live Listen.
4. Customize your headphone audio settings:
   • Use Custom Audio Setup. You’ll listen to audio samples and choose which ones sound better to you. Then you can apply the custom settings suggested based on your choices.
   • Use your audiogram data.
   • Manually adjust audio settings.

Use Custom Audio Setup

1. Reset any current audio configurations to their default settings:
   • Go to Settings > Music > EQ, then tap Off to turn off Music EQ.
   • Go to Settings > Accessibility > Audio/Visual, then adjust the Balance slider. Set the audio volume balance to the center.
2. Connect your headphones. Make sure that you’re in a quiet environment.
3. Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations. Tap Custom Audio Setup.
4. Follow the instructions on your screen. When finished, tap Use Custom Settings to apply the custom settings suggested based on your choices. You can switch back to standard settings at any time.

Use your audiogram data from the Health app

Tap Custom Audio Setup, then tap Use Audiogram to use your audiogram data from the Health app to customize audio settings.

If you have a nearly symmetric audiogram, Headphone Accommodations will take the average of the two ears and fit the left and right audio channels with that profile. If you have an asymmetric audiogram, it will fit the left and right audio channels for your better ear.

Manually adjust audio settings

From the Headphone Audio screen, you can also adjust tone and amplification settings manually. Tap Play Sample to hear an audio sample with your current settings. You can change these settings while listening to the sample to compare them.

To adjust the audio volume balance between left and right channels:

1. Go to Settings > Accessibility > Audio/Visual.
2. Adjust the Balance slider.

Customize Transparency mode on your AirPods Pro

Headphone Accommodations supports Transparency mode on AirPods Pro, making quiet voices more audible and tuning the sounds of your environment to your hearing needs. Learn more about Transparency mode and how to turn it on.

When Transparency mode is on, your Headphone Accommodations settings might change how you hear your own voice or increase your environment’s noise level. You might need to adjust these settings to find a setup that’s most comfortable for you. You can start from a milder setting by adjusting the Tone or Amplification slider. Then gradually increase to the setting that’s most helpful for hearing people’s voices or natural sound around you.

To customize Transparency mode settings:

1. Check that you have the latest version of iOS or iPadOS.
2. Put your AirPods Pro in your ears and connect them to your iPhone or iPad.
3. Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations > Transparency Mode.
4. Tap Custom Transparency Mode and turn it on.

To adjust the audio-volume balance between left and right channels, adjust the Transparency Balance slider. You can also adjust Transparency mode settings by tapping the Hearing button in Control Center.

Use Conversation Boost on your AirPods Pro

Conversation Boost focuses your AirPods Pro on the person who’s talking in front of you. This makes it easier to hear when you’re talking face-to-face.

To turn on Conversation Boost:

1. Check that you have the latest version of iOS or iPadOS.
2. Put your AirPods Pro in your ears and connect them to your iPhone or iPad.
3. Go to Settings > Accessibility > Audio/Visual > Headphone Accommodations > Transparency Mode.
4. Tap Conversation Boost.

You can also turn on Conversation Boost by tapping the Hearing button in Control Center.

Источник

AutoVolume Lite

Self Adjusting Volume

Detect outside noise and automatically decrease or increase music volume loudness in your headphones 4+

Jaroszlav Zseleznov

Designed for iPhone

iPhone Screenshots

Description

Forget the volume buttons while listening to music! Traveling on noisy bus? Use Amplifier mode to make music volume gracefully adjust itself depending on the average noise. Or you wish to listen music but your attention is needed? Use Office mode to instantly auto lower the volume on any noise.

All this intelligently, gracefully and just as much as you prefer using the adjustable in/out characteristics curve!

Think of a world where music is always playing at the correct volume level.

◆◆◆ WHY ◆◆◆
√ You don’t have to play with the volume at every transport stop n goes, or when passing by a loud street.
√ You can have full attention to others while listening music and you don’t have to take your earbuds out while talking to someone.

◆◆◆ HOW IT WORKS ◆◆◆
AutoVolume will constantly measure the outside noise level with the iPhone’s built in microphone (on the headphones) and then gracefully adjust the music volume depending on the average noise measurements and your personal settings.

You can fine-tune just about everything and that is what makes AV so special.

•••• HOW TO USE ••••
Plug your headphones in (with microphone), start music playing and turn AutoVolume to ON state. AutoVolume will run in the background and do it’s job.

Fine-tuning and profile saving is only in full version!

•••• TWO MAIN MODE ••••
▸ Amplifier mode (volume adapts to the outside noise)
▸ Office mode (volume drops to the noise outside)

AutoVolume comes with a documentation BUT it can be used not only by professionals, using the pre-configured profiles made for typical noise environments.

•••• FEATURES ••••
▸ Change sampling speed and duration (for reaction speed and averaging characteristics)
▸ Use Hold at Minimum function (volume remains low for a pre-configured amount of seconds)
▸ Use MicTouch protection (no more false volume inputs while switching songs with your fingers)
▸ Use different profiles (load configurations quickly for different situations)
▸ Built in Music player (access your iPod library right from the app)
▸ Shake device for visual help
▸ Bluetooth support (with built-in microphone)

Median averaging is very handy when it comes to excluding short period, on-off sounds.

◆◆◆◆ features NOT included in the Lite version ◆◆◆◆
▸ Change Minimum and Maximum volume limits
▸ Editing and saving Profiles
▸ Change characteristics of signal-to-noise ratio (inout/output volume curve) with your finger tips
▸ Change volume fader speed and increment (have the volume gracefully adjusted your way)
▸ Change threshold (set your preferences of minimum noise input)
▸ Choose between different averaging methods (Simple average or Median average)
▸ Change Hold at Minimum duration

•••• REQUIREMENTS ••••
▸ You will need to be wearing your headphones with integrated microphone.

Источник

AutoVolume

Automatic Volume Control 4+

Jaroszlav Zseleznov

Designed for iPhone

iPhone Screenshots

Description

Forget the volume buttons while listening to music! Traveling on noisy bus? Use Amplifier mode to make music volume gracefully adjust itself depending on the average noise. Or you wish to listen music but your attention is needed? Use Office mode to instantly auto lower the volume on any noise.

All this intelligently, gracefully and just as much as you prefer using the adjustable in/out characteristics curve!

Think of a world where music is always playing at the correct volume level.

◆◆◆ WHY ◆◆◆
√ You don’t have to play with the volume at every transport stop n goes, or when passing by a loud street.
√ You can have full attention to others while listening music and you don’t have to take your earbuds out while talking to someone.

◆◆◆ HOW IT WORKS ◆◆◆
AutoVolume will constantly measure the outside noise level with the iPhone’s built in microphone (on the headphones) and then gracefully adjust the music volume depending on the average noise measurements and your personal settings.

You can fine-tune just about everything and that is what makes AV so special.

•••• HOW TO USE ••••
Plug your headphones in (with microphone), start music playing and turn AutoVolume to ON state. AutoVolume will run in the background and do it’s job.

•••• BEFORE USING ••••
Set your desired Minimum & Maximum volume limits and save your profile for later use.

•••• TWO MAIN MODE ••••
▸ Amplifier mode (volume adapts to the outside noise)
▸ Office mode (volume drops to the noise outside)

AutoVolume comes with a documentation BUT it can be used not only by professionals, using the pre-configured profiles made for typical noise environments.

•••• FEATURES ••••
▸ Editing and saving Profiles
▸ Change characteristics of signal-to-noise ratio (inout/output volume curve) with your finger tips
▸ Change volume fader speed and increment (have the volume gracefully adjusted your way)
▸ Change threshold (set your preferences of minimum noise input)
▸ Choose between different averaging methods (Simple average or Median average)
▸ Change Hold at Minimum duration
▸ Change sampling speed and duration (for reaction speed and averaging characteristics)
▸ Use Hold at Minimum function (volume remains low for a pre-configured amount of seconds)
▸ Use MicTouch protection (no false volume inputs while pressing the microphone to switch songs)
▸ Use different profiles (load configurations quickly for different situations)
▸ Built in Music player (access your iPod library right from the app)
▸ Shake device for visual help
▸ Bluetooth support (with built-in microphone)

Median averaging is very handy when it comes to excluding short period, on-off sounds.

•••• REQUIREMENTS ••••
▸ You will need to be wearing your headphones with integrated microphone.

Источник

AutoVolume

Automatic Volume Control 4+

Jaroszlav Zseleznov

Designed for iPhone

iPhone Screenshots

Description

Forget the volume buttons while listening to music! Traveling on noisy bus? Use Amplifier mode to make music volume gracefully adjust itself depending on the average noise. Or you wish to listen music but your attention is needed? Use Office mode to instantly auto lower the volume on any noise.

All this intelligently, gracefully and just as much as you prefer using the adjustable in/out characteristics curve!

Think of a world where music is always playing at the correct volume level.

◆◆◆ WHY ◆◆◆
√ You don’t have to play with the volume at every transport stop n goes, or when passing by a loud street.
√ You can have full attention to others while listening music and you don’t have to take your earbuds out while talking to someone.

◆◆◆ HOW IT WORKS ◆◆◆
AutoVolume will constantly measure the outside noise level with the iPhone’s built in microphone (on the headphones) and then gracefully adjust the music volume depending on the average noise measurements and your personal settings.

You can fine-tune just about everything and that is what makes AV so special.

•••• HOW TO USE ••••
Plug your headphones in (with microphone), start music playing and turn AutoVolume to ON state. AutoVolume will run in the background and do it’s job.

•••• BEFORE USING ••••
Set your desired Minimum & Maximum volume limits and save your profile for later use.

•••• TWO MAIN MODE ••••
▸ Amplifier mode (volume adapts to the outside noise)
▸ Office mode (volume drops to the noise outside)

AutoVolume comes with a documentation BUT it can be used not only by professionals, using the pre-configured profiles made for typical noise environments.

•••• FEATURES ••••
▸ Editing and saving Profiles
▸ Change characteristics of signal-to-noise ratio (inout/output volume curve) with your finger tips
▸ Change volume fader speed and increment (have the volume gracefully adjusted your way)
▸ Change threshold (set your preferences of minimum noise input)
▸ Choose between different averaging methods (Simple average or Median average)
▸ Change Hold at Minimum duration
▸ Change sampling speed and duration (for reaction speed and averaging characteristics)
▸ Use Hold at Minimum function (volume remains low for a pre-configured amount of seconds)
▸ Use MicTouch protection (no false volume inputs while pressing the microphone to switch songs)
▸ Use different profiles (load configurations quickly for different situations)
▸ Built in Music player (access your iPod library right from the app)
▸ Shake device for visual help
▸ Bluetooth support (with built-in microphone)

Median averaging is very handy when it comes to excluding short period, on-off sounds.

•••• REQUIREMENTS ••••
▸ You will need to be wearing your headphones with integrated microphone.

Источник