Android build code names

Tek Eye

The table in this article lists all the different versions of Android, starting with the earliest Application Programming Interface (API) level to the latest API level. Thus the list is from the oldest Android versions to the latest.

Android Versions by Name, Number, Availability and API Level

Each version of Android is given a code name. The code name is traditionally the name of a dessert, cake or sweet, e.g, Gingerbread, Froyo, Jelly Bean, etc. — as the sugar laden picture below shows. The table that follows lists the code names, version numbers, first release date and Application Programming Interface (API) versions, along with the equivalent Software Development Kit (SDK) constants (Build.VERSION_CODES). The Android version number on a device is normally found in the settings. Select Settings, then About Phone or About Device and look at the Firmware Version or Android Version entry.

List of Android Versions and Their Names, API Level and Dates

Name	Version	Available	API	VERSION_CODES
N/A	1.0	October 2008	1	BASE
N/A	1.1	February 2009	2	BASE_1_1
Cupcake	1.5	May 2009	3	CUPCAKE
Donut	1.6	September 2009	4	DONUT
Eclair	2.0	November 2009	5	ECLAIR
Eclair	2.0.1	December 2009	6	ECLAIR_0_1
Eclair	2.1	January 2010	7	ECLAIR_MR1
Froyo	2.2 to 2.2.3	June 2010	8	FROYO
Gingerbread	2.3 to 2.3.2	November 2010	9	GINGERBREAD
Gingerbread	2.3.3 to 2.3.7	February 2011	10	GINGERBREAD_MR1
Honeycomb	3.0	February 2011	11	HONEYCOMB
Honeycomb	3.1	May 2011	12	HONEYCOMB_MR1
Honeycomb	3.2 to 3.2.6	June 2011	13	HONEYCOMB_MR2
Ice Cream Sandwich	4.0.1 to 4.0.2	October 2011	14	ICE_CREAM_SANDWICH
Ice Cream Sandwich	4.0.3 to 4.0.4	December 2011	15	ICE_CREAM_SANDWICH_MR1
Jelly Bean	4.1 to 4.1.1	July 2012	16	JELLY_BEAN
Jelly Bean	4.2 to 4.2.2	November 2012	17	JELLY_BEAN_MR1
Jelly Bean	4.3	July 2013	18	JELLY_BEAN_MR2
Kit Kat	4.4 to 4.4.4	October 2013	19	KITKAT
Kit Kat	4.4W to 4.4W.2	June 2014	20	KITKAT_WATCH
Lollipop	5.0 to 5.0.2	November 2014	21	LOLLIPOP
Lollipop	5.1 to 5.1.1	March 2015	22	LOLLIPOP_MR1
Marshmallow	6.0 to 6.0.1	October 2015	23	M
Nougat	7.0	August 2016	24	N
Nougat	7.1 to 7.1.2	October 2016	25	N_MR1
Oreo	8.0.0	August 2017	26	O
Oreo	8.1.0	December 2017	27	O_MR1

The above table was derived from the following sources (note that some release dates are derived from the Android developers documentation, the actual SDK availability may have been a little earlier, see the Wikipedia article):

When programming an App the API level is used to determine whether specific Android features are present or not. The API level can be read in versions prior to Donut (Cupcake, 1.1 and 1.0) using:

int APILevel = Integer.parseInt(Build.VERSION.SDK);

And from Donut onwards using:

int APILevel = Build.VERSION.SDK_INT;

(Build.VERSION.SDK is deprecated, i.e. it will be removed from the API at some future release).

When using functionality from a later API, but the App needs to support earlier Android versions, wrap the newer functionality in a separate class. Then check the API level before instantiating the class to prevent a VerifyError exception from occurring. See the article Support Multiple API Versions in Android.

Author: Daniel S. Fowler Published: 2012-05-25 Updated: 2017-01-08

Do you have a question or comment about this article?

(Alternatively, use the email address at the bottom of the web page.)

↓markdown↓ CMS is fast and simple. Build websites quickly and publish easily. For beginner to expert.

Free Android Projects and Samples:

Источник

Build and run your app

Android Studio sets up new projects to deploy to the Android Emulator or a connected device with just a few clicks. Once your app is installed, you can use Apply Changes to deploy certain code and resource changes without building a new APK.

To build and run your app, follow these steps:

In the toolbar, select your app from the run configurations drop-down menu.

From the target device drop-down menu, select the device that you want to run your app on.

If you don’t have any devices configured, then you need to either connect a device via USB or create an AVD to use the Android Emulator.

Click Run .

Change the run/debug configuration

When you run your app for the first time, Android Studio uses a default run configuration. The run configuration specifies whether to deploy your app from an APK or an Android App Bundle, the module to run, package to deploy, activity to start, target device, emulator settings, logcat options, and more.

The default run/debug configuration builds an APK, launches the default project activity, and uses the Select Deployment Target dialog for target device selection. If the default settings don’t suit your project or module, you can customize the run/debug configuration, or even create a new one, at the project, default, and module levels. To edit a run/debug configuration, select Run > Edit Configurations. For more information, see Create and Edit Run/Debug Configurations.

Change the build variant

By default, Android Studio builds the debug version of your app, which is intended for use only during development, when you click Run.

To change the build variant Android Studio uses, select Build > Select Build Variant in the menu bar.

For projects without native/C++ code, the Build Variants panel has two columns: Module and Active Build Variant. The Active Build Variant value for the module determines which build variant the IDE deploys to your connected device and is visible in the editor.

Figure 1. The Build Variants panel has two columns for projects that do not have native/C++ code

To switch between variants, click the Active Build Variant cell for a module and choose the desired variant from the list field.

For projects with native/C++ code, the Build Variants panel has three columns: Module, Active Build Variant, and Active ABI. The Active Build Variant value for the module determines the build variant that the IDE deploys to your device and is visible in the editor. For native modules, the Active ABI value determines the ABI that the editor uses, but does not impact what is deployed.

Figure 2. The Build Variants panel adds the Active ABI column for projects with native/C++ code

To change the build variant or ABI, click the cell for the Active Build Variant or Active ABI column and choose the desired variant or ABI from the list. After you change the selection, the IDE syncs your project automatically. Changing either column for an app or library module will apply the change to all dependent rows.

By default, new projects are set up with two build variants: a debug and release variant. You need to build the release variant to prepare your app for public release.

To build other variations of your app, each with different features or device requirements, you can define additional build variants.

Conflicts in Android Studio’s Build Variants dialog

In Android Studio’s Build Variants dialog, you might see error messages indicating conflicts between build variants, such as the following:

This error does not indicate a build issue with Gradle – it is only indicating that the Android Studio IDE itself cannot resolve symbols between the variants of the selected modules.

For example, if you have a module M1 that depends on variant v1 of module M2 , but M2 has variant v2 selected in the IDE, you have unresolved symbols in the IDE. Let’s say that M1 depends on a class Foo which is only available in v1 . When v2 is selected, that class is not known by the IDE and it will fail to resolve it and show errors in the code of M1 .

These error messages appear because the IDE cannot load code for multiple variants simultaneously. In terms of your app’s build, however, the variant selected in this dialog will have no effect because Gradle builds your app with the source code specified in your Gradle build recipes, not based on what’s currently loaded in the IDE.

Build your project

The Run button builds and deploys your app to a device. However, to build your app to share or upload to Google Play, you’ll need to use one of the options in the Build menu to compile parts or all of your project. Before you select any of the build options listed in table 1, make sure you first select the build variant you want to use.

Table 1. Build options in the Build menu.

Builds an APK of all modules in the current project for their selected variant. When the build completes, a confirmation notification appears, providing a link to the APK file and a link to analyze it in the APK Analyzer.

If the build variant you’ve selected is a debug build type, then the APK is signed with a debug key and it’s ready to install. If you’ve selected a release variant, then, by default, the APK is unsigned and you must manually sign the APK. Alternatively, you can select Build > Generate Signed Bundle / APK from the menu bar.

Android Studio saves the APKs you build in project-name / module-name /build/outputs/apk/ .

Builds an Android App Bundle of all modules in the current project for their selected variant. When the build completes, a confirmation notification appears, providing a link to the app bundle and a link to analyze it in the APK Analyzer.

If the build variant you’ve selected is a debug build type, then the app bundle is signed with a debug key, and you can use bundletool to deploy your app from the app bundle to a connected device. If you’ve selected a release variant, then the app bundle is unsigned by default and you must manually sign it using jarsigner . Alternatively, you can select Build > Generate Signed Bundle / APK from the menu bar.

Android Studio saves the APKs you build in project-name / module-name /build/outputs/bundle/ .

Menu Item	Description
Make Module	Compiles all source files in the selected module that have been modified since the last build, and all modules the selected module depends on recursively. The compilation includes dependent source files and any associated build tasks. You can select the module to build by selecting either the module name or one of its files in the Project window.
Make Project	Makes all modules.
Clean Project	Deletes all intermediate/cached build files.
Rebuild Project	Runs Clean Project for the selected build variant and produces an APK.
Build Bundle(s) / APK(s) > Build APK(s)
Build Bundle(s) / APK(s) > Build Bundle(s)
Brings up a dialog with a wizard to set up a new signing configuration, and build either a signed app bundle or APK. You need to sign your app with a release key before you can upload it to the Play Console. For more information about app signing, see Sign your app.

Note: The Run button builds an APK with testOnly=»true» , which means the APK can only be installed via adb (which Android Studio uses). If you want a debuggable APK that people can install without adb, select your debug variant and click Build Bundle(s) / APK(s) > Build APK(s).

For details about the tasks that Gradle executes for each command, open the Build window as described in the next section. For more information about Gradle and the build process, see Configure Your Build.

Monitor the build process

You can view details about the build process by clicking View > Tool Windows > Build (or by clicking Build in the tool window bar). The window displays the tasks that Gradle executes in order to build your app, as shown in figure 3.

Figure 3. The Build output window in Android Studio

Build tab: Displays the tasks Gradle executes as a tree, where each node represents either a build phase or a group of task dependencies. If you receive build-time or compile-time errors, inspect the tree and select an element to read the error output, as shown in figure 4.

Figure 4. Inspect the Build output window for error messages

Sync tab: Displays tasks that Gradle executes to sync with your project files. Similar to the Build tab, if you encounter a sync error, select elements in the tree to find more information about the error.

Restart: Performs the same action as selecting Build > Make Project by generating intermediate build files for all modules in your project.

Toggle view: Toggles between displaying task execution as a graphical tree and displaying more detailed text output from Gradle—this is the same output you see in the Gradle Console window on Android Studio 3.0 and earlier.

If your build variants use product flavors, Gradle also invokes tasks to build those product flavors. To view the list of all available build tasks, click View > Tool Windows > Gradle (or click Gradle in the tool window bar).

If an error occurs during the build process, Gradle may recommend some command-line options to help you resolve the issue, such as —stacktrace or —debug . To use command-line options with your build process:

1. Open the Settings or Preferences dialog:
   • On Windows or Linux, select File >Settings from the menu bar.
   • On Mac OSX, select Android Studio >Preferences from the menu bar.
2. Navigate to Build, Execution, Deployment >Compiler.
3. In the text field next to Command-line Options, enter your command-line options.
4. Click OK to save and exit.

Gradle applies these command-line options the next time you try building your app.

Apply Changes

In Android Studio 3.5 and higher, Apply Changes lets you push code and resource changes to your running app without restarting your app—and, in some cases, without restarting the current activity. This flexibility helps you control how much of your app is restarted when you want to deploy and test small, incremental changes while preserving your device’s current state. Apply Changes uses capabilities in the Android JVMTI implementation that are supported on devices running Android 8.0 (API level 26) or higher. To learn more about how Apply Changes works, see Android Studio Project Marble: Apply Changes.

Requirements

Apply Changes actions are only available when you meet the following conditions:

• You build the APK of your app using a debug build variant.
• You deploy your app to a target device or emulator that runs Android 8.0 (API level 26) or higher.

Use Apply Changes

Use the following options when you want to deploy your changes to a compatible device:

Apply Changes and Restart Activity

Attempts to apply both your resource and code changes by restarting your activity but without restarting your app. Generally, you can use this option when you’ve modified code in the body of a method or modified an existing resource.

You can also perform this action by pressing Ctrl+Alt+F10 (or Control+Shift+Command+R on macOS).

Apply Code Changes

Attempts to apply only your code changes without restarting anything. Generally, you can use this option when you’ve modified code in the body of a method but you have not modified any resources. If you’ve modified both code and resources, use Apply Changes and Restart Activity instead.

You can also perform this action by pressing Ctrl+F10 (or Control+Command+R on macOS).

Run

Deploys all changes and restarts the app. Use this option when the changes that you have made cannot be applied using either of the Apply Changes options. To learn more about the types of changes that require an app restart, see Limitations of Apply Changes.

Enable Run fallback for Apply Changes

After you’ve clicked either Apply Changes and Restart Activity or Apply Code Changes, Android Studio builds a new APK and determines whether the changes can be applied. If the changes can’t be applied and would cause Apply Changes to fail, Android Studio prompts you to Run your app again instead. However, if you don’t want to be prompted every time this occurs, you can configure Android Studio to automatically rerun your app when changes can’t be applied.

To enable this behavior, follow these steps:

Open the Settings or Preferences dialog:

• On Windows or Linux, select File > Settings from the menu bar.
• On macOS, select Android Studio > Preferences from the menu bar.

Navigate to Build, Execution, Deployment > Deployment.

Select the checkboxes to enable automatic Run fallback for either of the Apply Changes actions.

Click OK.

Platform-dependent changes

Some features of Apply Changes depend on specific versions of the Android platform. To apply these kinds of changes, your app must be deployed to a device running that version of Android (or higher).

Type of change	Minimum platform version
Adding a method	Android 11

Limitations of Apply Changes

Apply Changes is designed to speed up the app deployment process. However, there are some limitations for when it can be used. If you encounter any issues while using Apply Changes, file a bug.

Code changes that require app restart

Some code and resource changes cannot be applied until the app is restarted, including the following:

• Adding or removing a field
• Removing a method
• Changing method signatures
• Changing modifiers of methods or classes
• Changing class inheritance
• Changing values in enums
• Adding or removing a resource
• Changing the app manifest
• Changing native libraries (SO files)

Libraries and plugins

Some libraries and plugins automatically make changes to your app’s manifest files or to resources that are referenced in the manifest. These automatic updates can interfere with Apply Changes in the following ways:

• If a library or plugin makes changes to your app’s manifest, you can’t use either Apply Code Changes or Apply Changes and Restart Activity and have to restart your app before you can see your changes.
• If a library or plugin makes changes to your app’s resource files, you can’t use Apply Code Changes , and you must use Apply Changes and Restart Activity to see your changes.

You can avoid these limitations by disabling all automatic updates for your debug build variants.

For example, Crashlytics updates app resources with a unique build ID during every build, which prevents you from using Apply Code Changes and requires you to restart your app’s activity to see your changes. You can disable this behavior so that you can use Apply Code Changes alongside Crashlytics with your debug builds.

Code that directly references content in an installed APK

If your code directly references content from your app’s APK that’s installed on the device, that code can cause crashes or misbehave after clicking Apply Code Changes . This behavior occurs because when you click Apply Code Changes, the underlying APK on the device is replaced during installation. In these cases, you can click Apply Changes and Restart Activity or Run , instead.

Content and code samples on this page are subject to the licenses described in the Content License. Java is a registered trademark of Oracle and/or its affiliates.

Источник