Android для htc hd2 4pda

Android для htc hd2 4pda

У меня прошивка NexusHD2 ICS 4.0.3 CM9 никак невидит ext раздел на 1024 на карте Kingston. (вернее видит и пишет туда что-то, но отображается все равно свободных 130 метров, потом вообще заканчивается.) Раздел создавал в CWM 5.0.2.7. и более ранеей. Перепробовал способ указанный в этом посте, так Darktremor Apps2SD v2.7 beta5 не прописался в CWM, выдавались ошибки о несовместимости в конце устанвоки. Также fix_permissions в СWM не помог. Потом попробовал поиграться SpareParts, также не видит раздел. Возможно в НD2 используется ext4, а CWM форматирует в ext2. Не связано ли как-то с этим? У всех такая проблема, если нет то кто что как делал для ext?

Сообщение отредактировал galaxx — 24.01.12, 02:59

New Kernel 3.8 ULTIMATE

*Added 96Mhz super low standby frequency with 975mV set to be stable!
*Added Tiny Preemptable RCU CPU scheduler! Now cpu power increased allot!
*Fixed Video driver, now scrolling in all apps and home launcher is much faster!
*Added extension of RAM page table from 2MB to 14MB! more ram for system operations! greatly increase system performance!
*Added safe Overcharge for battery. now it’s will be really fully charged and live for longer time.
*Added Power Management tweaks to reduce standby drain.
*Added I/O fix and Manager, now I/O of the sdcard is much faster!
*Added ICS to Kernel Menu! now all ICS users can use my kernel.
*Added lots of cpu governors to play with, most stable and strong is ondemand and smartassv2 all the rest should be tested for lond time to see if they good or not..

Иии, я таки сделал это! Скрипт для переноса дальвик-кэша на карту БЕЗ глюков со звуком. Собственно, многого делать не пришлось, я просто слегка подправил скрипт, выдранный из Typhoon-а.
Мануал:
1. Шьём ром.
2. Шьём Darktremor Apps2SD v2.7 beta4.
3. Шьём приложенный файл.
4. Если ставится без фулл вайпа, то нужно будет через рекавери удалить кэш дальвика, скриптом он почему-то полностью не затирается.

Собственно, весь прикол в том, что глюк с тихим звуком происходит, если мы ссылаем дальвик на карту с помощью символьных ссылок. Тобишь как то так:

После всего это ни в коем случае не включаем перенос дальвика в Darktremor Apps2SD, и всё замечательно работает.

S.V.D.,
а можно подробнее.
1,2 и 3 пункты шить сразу не перегружая?
в 4 пункте без какого фул вайпа? и как удалить через рекавери кэш дальвика?

Сообщение отредактировал Ze_KiLLER — 24.01.12, 18:51

Для ознакомления уважаемых форумчан ТЫК
ИМХО MIUI 4.0 представлена слабо.
У меня сейчас стоит 3-я прошивка.

Сообщение отредактировал birdos — 24.01.12, 18:58

Источник

Android для htc hd2 4pda

HTC HD2 NDT Ginger MIUI ROM

HTC HD2 NDT Ginger MIUI ROM
Тема автора на xda-developers

  • MIUI лаунчер
  • 3G/Data/Audio/Bluetooth/GPS/GSM/LED Нотификации
  • Wi-Fi (IEEE 802.1x/EAP аутентификация и Ad-Hoc Wi-Fi)
  • APN для большинства сетей
  • MIUI Камера(широкоформатная поддержка)
  • Видеозапись (800×480)
  • Блокирование большинства всплывающей рекламы через host’ы
  • Работа в кач-ве USB накопителя
  • WIFI Tethering/Wired Tethering
  • A2SD+ по-умолчанию (Активирован Swap и поддержка переноса Dalvik cache на SD EXT раздел)
  • Фикс повышенного энергопотребления Bluetooth
  • Многие используемые приложения
  • Поддержка FM Радио

Проблемы:
При зависаниях\перезагрузках во время входящего звонка/SMS, откройте приложение SuperUser и разрешите приложению ROOT права.
При перезагрузках камеры, перейдите в настройки камеры, чтобы отключить автофокус

Убедительная просьба от автора — не зеркальте прошивку!

Сообщение отредактировал KEEPERekb — 23.04.15, 15:35

Как активировать Data2EXT в MIUI GINGER ROM :
Примечание: Эту надстройку рекомендуется использовать с высокоскоростными картами (класса 6 и выше) для наилучшей производительности, медленная карта может замедлить скорость работы прошивки
1.Создаём ext раздел на SD карте
— Отформатируйте SD карточку
— Самый лёгкий путь создать ext раздел через CWM Recovery:
— Запускаем Recovery
— Выбираем Advanced —>Partition SD Card
— Выбираем размер EXT раздела (Максимум 2048Mb) размер Swap (Рекомендуется 128Mb)
— Ждём выполнения
2. Установка Data2EXT :
— Установите прошивку
— Установите A2SD Killer script A2SDKillerV11_GB.zip ( 256.01 КБ )

— Перезагрузитесь после применения A2SD Killer и настройте всё как Вам необходимо, НО НИЧЕГО НЕ УСТАНАВЛИВАЙТЕ
— Перезагрузитесь, при перезагрузке зайдите в recovery и установите Data2SD Installer Data2SDInstallerv1.3_GB.zip ( 159.36 КБ )

— Перезагрузитесь вновь и увидите результат

Сообщение отредактировал De11 — 22.07.11, 21:15

Стабильная версия
Версия 6.0 Мультиязычная :

  • Обновление дополнений из версии для разработчиков
  • Обновление приложений Google
  • Новые библиотеки с фиксом громкости звука во время разговора
  • Новые настройки и обновление MMS
  • Новая тема и иконки

Сообщение отредактировал De11 — 24.02.12, 22:43

Если Вы хотите больше места на встроенной памяти, следуйте следующей инструкции:
— Зайдите в меню MAGLDR
— Выберите Services -> UseLast24NAND
— Примените, нажав клавишу вызова
У Вас будет на 24мб больше, когда Вы перезагрузитесь.
Проверка и создание A2SD
Запустите эмулятор терминала и напечатайте следующее:

если Вы хотите проверить корректно ли работает скрипт.

1. Введите *#*#6484#*#* для доступа к заводскому меню.В этом меню Вы можете проверить массу вещей.
2. Если в приложениях черный фон зайдите в настройки -> Управление приложениями -> выберите приложение, в котором чёрный фон -> режим совместимости -> Включите или выключите
Есть путь быстрее:
— Долго жмите клавишу Домой(домик)
— Если среди запущенных есть приложение с чёрным фоном — зажмите и держите палец на его иконке
— Это перенесёт Вас в тоже самое меню управления приложением
3. Вы можете найти массу тем здесь: темы для MIUI .Выберите понравившуюся тему, скопируйте файл *.mtz в /MIUI/theme на SD карте и используя менеджер тем выберите скопированную тему.
4. Задержка появления номера при входящем звонке
-Отключите датчик приближения в настройках->Приложения->Вызовы
5. Долго жмите клавишу Домой(домик) для доступа с последним используемым приложениям/менеджеру задач
6. Возможности локскрина:
— Нажмите на Дату и потяните вниз, для разблокировки телефона
— Нажмите иконку вызова и потяните вниз, для быстрого доступа к звонилке
— Нажмите иконку смси потяните вниз, для быстрого доступа к сообщениям
— Нажмите и держите кнопку «домик» для активации фонарика
7. Удаление приложения или игры:
— Нажмите и держите иконку на рабочем столе, перенесите иконку в корзину для удаления
8. Долгое нажатие на иконку в «Уведомлениях» запустит настройки иконки.
9. Возможно быстрое снятие скриншотов при одновременном нажатии кнопки «windows»(меню) и кнопки понижения громкости. Полученный скриншот сохранится на карте памяти в папке miui\screen_cap
10. Быстрое расчёркивание слева направо, удаляет сообщение или журнал вызовов.
11. Вы можете удерживать иконку одной рукой в режим редактирования, а другой рукой пролистывать экраны для быстрого перемещения иконки
12. Двойное нажатие на часах на локскрине запустит музыкальный проигрыватель
13. Нажмите на фото контакта в «вызовах» «смс» или «контактах» для появления контекстного меню
14. Для отображения батареи в процентах перейдите в «Настройки»->»система»->»батарея»->»стиль индикатора батареи»
15. Как установить IP набор?
В MIUI можно добавить IP-префикс для вызываемого номера в чужой стране. Вы можете установить его в меню Настройки> Программы> Вызовы.
Вы также можете зажать иконку контакта перед набором номера, и выбрать «IP-звонок» в всплывающем меню.
16. Когда Вы не готовы ответить на звонок, Вы можете провести слайдер вверх, чтобы отклонить вызов и отправить сообщение для звонящего в это же время.
17.Вы можете положить медиафайлы в формате MP3, WMA, WAV, Midi, etc. в Media/Audio/ringtones папку на SD карте, (Если этой папки нет, пожалуйста, создайте ее вручную), а затем выберите необходимое в «Звуках» в «Настройках»
Примечание: Существуют три папки аудио, соответствующие следующим типам сигнала:
notifications- мелодии уведомления
ringtones- мелодии входящих вызовов
alarms- сигналы об ошибке
18. Как быстро удалять элементы?
Быстрое расчёркивание слева направо по этому элементу и нажать на кнопку «Удалить» при ее появлении.
20. Как я могу расшарить соединения для ПК и других устройств?
Прошивка на Android 2.2+ поддерживает расшаривание интернета следующим образом:
Перейдите в раздел «Настройки» -> «Система» -> «Режим модема», Вы можете расшарить Интернет, используя аппарат в кач-ве USB модема или портативного Wi-Fi hotspot.
21.Как скопировать файлы с компьютера на телефон?
Для начала подключите аппарат к компьютеру через USB кабель, опустите панель уведомлений в верхней части телефона, нажмите кнопку «USB подключение»
После копирования, не забудьте отключить «USB подключение», в противном случае «Файловый менеджер» в телефонене сможет найти SD карту, так как в настоящее время её использует компьютер.
22.Итак, у меня установлено много приложений, как их можно упорядочить?
Длительным нажатием на значок приложения, Вы можете свободно его переместить с одного рабочего стола на другой. Когда он попадёт в границу экрана, экран автоматически переключается на следующий рабочий стол.
23. Как добавить рабочий стол?
Зажмите 2 пальца на рабочем столе для входа в режим миниатюры рабочих столов. Там Вы можете удалять старые и добавлять новые рабочие столы
24. Как удалить приложение?
Зажмите иконку приложения, которое хотите удалить и переместите его в корзину, в верхней части экрана
25. Добавление виджетов на рабочем столе: нажмите кнопку меню на рабочем столе, выберите «Изменить» («Edit Mode»), все виджеты будут внизу в строчке.
26. Гостевой режим: включите режим «гостя» на панели уведомлений, и ваши звонки и текстовые сообщения, а так же логи будут скрыты, и все установленные приложения не смогут быть удалены. Это может понадобиться, если даёте телефон постороннему или ребёнку.
27. Импорт контактов или связанных аккаунтов: Вы можете использовать несколько приложений, чтобы импортировать контакты или связать аккаунт Google непосредственно в «Настройках»> «Личные»> «Аккаунты и синхронизация» для синхронизации контактов в любое время.
28. Как скопировать файлы с компьютера без использования кабеля для передачи данных?
В случае доступного Wi-Fi соединения, включите файловый менеджер на рабочем столе, выберите вкладку «Удаленное администрирование» (Синхронизация), чтобы запустить службу, затем вы получите адрес. Введите указанный адрес на компьютере, и Вы можете копировать файлы без использования кабеля передачи данных.
29. На прошивках MIUI игры от gameloft не видят кеш. В файле build.prop замените строчку ro.product.manufacturer=unknown на ro.product.manufacturer=HTC
30. Как избавиться от уведомлений при отключении телефона в режиме накопителя? Инструкция от Кронос

Читайте также:  Не могу обновить андроид с рут правами

Сообщение отредактировал De11 — 14.11.11, 20:37

4. Прошлые версии:

Сообщение отредактировал De11 — 12.12.11, 19:32

Источник

Android для htc hd2 4pda

Ядро MDJ S6 от 17.11
MDJ S5 от 17.11
MDJ S4 FINAL
hastarin r8.2 от 11.11
MDJ_S3
MDJ_R3
MDJ_S2 fixed
MDJ_R2 fixed
hastarin r8.1 (Overclocked, Undervolted, AXI enabled, CIFS/NFS support) от 07.11
hastarin r8.0 (Overclocked, Undervolted, AXI enabled, CIFS/NFS support, extended battery support) от 30.10
hastarin r7.7 (Overclocked, Undervolted, AXI enabled, CIFS/NFS support, extended battery support) от 27.10

Учитывая, что ядра, в отличии от сборок, очень сильно влияют на стабильность работы системы, имеет смысл устанавливать только новые ядра.
Поэтому здесь приведены описания и ссылки только на последние ядра. Названия старых даны для общего развития 🙂

Сообщение отредактировал GarryBig — 29.11.10, 18:49

HtcClay’s SuperHD2 V1.3 [michyprima RC10] noSense от 19.09.2010

Сообщение отредактировал GarryBig — 21.11.10, 19:29

Bangsters V1.4 [michyprima R11] RMNET + PPP + (AXI/NOAXI) + EVO noSense от 20.09.2010

Сообщение отредактировал GarryBig — 21.11.10, 19:34

Easier to list whats NOT working:

— Camera (app closes itself)
— Ebook reader (E-Books do not open)
— Ringtones (Unable to select a ringtone, get a force close error)
— Video playback from SD card is slow, needs rectifying
— LED Notifications are bizzare, sometimes they work and sometimes they don’t

// Creates a 1gb data.img (takes a long time to make on first boot, be patient. No, the HD2 has not crashed despite what the screen looks like! Wait 10 minutes or so.)
// Don’t worry about FB console not showing, that’s normal
// This shouldn’t really be considered as a build for daily usage, still experimental

// Copy the Android folder to SD card, run CLRCAD.EXE and haret.exe on your HD2

Git diff patches included, Thanks to gauner1986 for sharing his patch (and also correcting my mistake with PPPD )!
Thanks to mattc for support!
Thanks to football for the dump!
Thanks to the usual suspects at #htc-linux and #htc-linux-chat!

Kernel Tree: http://www.gitorious.com/linux-on-wi. x_on_wince_htc (Kernel compiled on 19/09/2010 by darkstone)
Diff patches used in the kernel provided are included in the build, found in the /Android/diff/ folder.

Сообщение отредактировал GarryBig — 21.11.10, 19:44

mattc Leo + Froyo w/Sense 1.8 [KiNgxKernel #5] withSense от 21.09.2010

Сообщение отредактировал GarryBig — 22.11.10, 12:06

mattc EvoLeo v1.0 [KiNgxKernel #5] withSense Внимание! Без русификации! от 21.09.2010

This is a brand new build. I have based it on the official HTC EVO rom and tweaked it for the HD2. The rootfs will create a 1GB data image.
The EVO base is friendlier to the non-trackball phones.
Important note: after booting Haret you will notice strange lines on the screen. This is normal, be patient and it will boot.

What is working:
Louder sound over speakerphone and headset
Very stable and fast internet over PPP. Hard freezes are completely eliminated
Light sensor
Touchscreen/Gsensor Freezes Eliminated
Bluetooth Streaming Media/Phone
Wifi
Wifi/USB tethering
USB transfers
EDGE/3G/HSDPA Internet
Camera (flash is buggy)
Standard Definition Camcorder w/flash
LED Keypad Lights and Charging Indicator
No more green line in HQ YouTube
All other items working on other builds, too many to list

What’s Added that you won’t get in my other build:
EVO keyboard with directional buttons
Proper HTC camera interface with working previews
Additional downloadable sense Widgets are working
Ringtones, notifications, etc. work without additional media folder (no more ringtones with your music!!)

Known Issues:
The camera flash is premature causing dark photos in low light
You may need to enter a manual DNS address when using WIFI tethering
There are menu items for 4G. The hardware doesn’t support 4G, they will fail.
Notification led is flaky, works at times, not at others. Don’t rely on it.

Tips:
Use SetCPU for better battery life.
Turn off live wallpaper for better performance and battery life.
I have included a Task Manager. Learn to use it religiously to improve battery life.

Other Notes:
CPU scaling is enable by default without SetCPU. This kernel cannot be overclocked.
I have included Astro File Manager as well as a Task Killer.

Installation Instructions:
Unzip the contents to your SD card. All of the files should extract into a folder named «Android».
Use an autoloader or, in Windows Mobile, browse to the Android folder on your SD card and run CLRCAD.exe, then Haret.exe.
Let Android boot. The first boot is always the longest and larger data sizes require longer times.
Enjoy Android.

Сообщение отредактировал GarryBig — 21.11.10, 20:19

JDMS 1.3 FRF91 Latest Stable Nightly [michyprima RC11] WITH AXIS noSense от 21.09.2010

Сообщение отредактировал GarryBig — 21.11.10, 20:25

HyperDroidV1.6 CM6 [michyprima R11] +AXI Fast,Stable,Latest noSense от 26.09.2010

Bleeding Edge Stuff (Newer code than the Current FRG33)
V1.6:
-Updated Base to Latest Stable September 20 Nightly
-Updated Twitter
-Updated Gmail
-Updated Adobe Flash
-Tightened Up the Elements of the ROM
-Small Tweaks & Fixes
-gauners’ fixed liblights
-newest haret
-and lots more.
V1.5:
-All Settings work (WiFi Proxy, etc.)
-Even Better Battery Life
-Media Playback Tweaks
-Smoother Graphics (thanks to darkstone)
-Support for Extended Battery
-Latest Haret by NetRipper
-New DSP Manager. (more control over the EQ)
-Long Press Back to Kill Foreground App
-Quiet Hours
-Swipe Latest Notifications to Clear (Doesn’t work for Ongoing Notifs)
-New Dialer (More updates through Patches to be released soon)
-Updated Maps (remove Brut.all since you can install this yourself, Install Street from market separately)
-Updated Theme to include MattedBlues+MattedGray Stuff 🙂
-and lots more «under the hood». What’s Tested & Working:
— Wifi
— GPS
— 3G
— LED Lights & Keypad Lights
— Camera with flash properly exposed
— Bluetooth
— 2D/3D Games (Gameloft, Com2Us, EA, CamelGames, etc.)
— Everything thats working on other builds

What Probably Doesn’t Work (or works but is unreliable) :
— WiFi Tethering is not reliable (new feature in development)
— USB Tethering is not reliable (works well with Easy Tether!)

Known Issues:
— If you get «unable to mount sdcard» simply replace «set cmdline «rel_path=YourBuildFolderName»» with «set cmdline «rel_path=YourBuildFolderName loop_partition=mmcblk0″» in the startup.txt
— Dropped Mobile Data Connections due to buggy PPP (will be fixed in the future, just like most things)
— Touch Screen Freezes when G-Sensor is overloaded (games like Abduction and other Accelerometer dependent Games). workaround is to use Portrait mode only.

Сообщение отредактировал GarryBig — 22.11.10, 03:17

NexusHD2-FRG83_V1_(Froyo 2.2.1) [michyprima R11] noSense от 29.09.2010

* «Stock» build except banning ads (hosts file is replaced)
* Use michyprima’s R11 Kernel with AXI scaling (support for extended batteries)
* Creates 512 MB data.img (You can specify the different data image size in startup.txt)
* Superuser privileges (su and busybox) included
* Some apps included (Delete any apk files in the AndroidApps folder before first boot if you don’t like any of them.)
* Disable «auto-rotate screen» in «Display settings» if encountering the touchscreen freeze.

What is working:

* WiFi
* GPS
* 3G/HSDPA
* 5MP Camera with flash
* Camcorder
* Bluetooth
* LED status notification
* Keypad LED control
* WiFi Tethering/Hotspot

Читайте также:  Adobe after effects для android

* USB Mass Storage (Only copying files from SD card to PC is working correctly.)
* Bluetooth calling (Someone has to test since I have no BT headset to test with.)
* Compass is inaccurate, this is known.

* Use SetCPU to overclock. The max default is set to 998MHz.
* Turn off live wallpaper for better performance and battery life.
* I have included the following apps in the AndroidApps folder, they will be installed at first boot:
o Battery Indicator 3.0.1.apk
o ES File Explorer 1.4.6.apk
o Superuser 2.3.6.1.apk
o TasKiller 3.3.3 Free.apk
o TeslaLED Flashlight 2.0.3 Droi.apk

1. Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
2. If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases .
3. After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
4. After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
5. On first run when there is «Creating a new datastore» just give it time to complete, and on first boot be patient and give it time to load everything.
6. If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.

Сообщение отредактировал GarryBig — 22.11.10, 03:22

Core Droid V0.4R Froyo / EVO Sense [michyprima #R11] withSense от 29.09.2010

Сообщение отредактировал GarryBig — 22.11.10, 03:26

FroyoStone Sense — V3.1 withSense от 29.09.2010

Сообщение отредактировал GarryBig — 22.11.10, 04:48

HyperDroidSenseV1.1 [hastarin r4.1] withSense от 29.09.2010

Сообщение отредактировал GarryBig — 22.11.10, 04:57

phireMOD SkinnyEVO v1.2b [hastarinl r4.1 or r7] | Stock Theme | Sprint-Free | FAST SENSE withSense от 30.09.2010

Features:
— Sprint-free! Removed all stock Sprint apps
— Removed other bloatware
— Changed boot animation
— Working G-sensor (do not calibrate!)
— Working light sensor
— Bluetooth, Wifi, Data
— Speaker is nice and loud
— 3MP Evo camera and 5MP Nexus camera included
— As per the developers request, SetCPU IS NOT included in this ROM. To get speeds similar to the included screenshot, please download the latest version of SetCPU
— Hastarin Kernel 4.1 or R7
— 1GB Data.img included

Check the changelog below for updates!

Installation:
— Place «Android» folder on the root of your SD card
— With keypad lights on, run «CLRCAD.exe» then «haret.exe»
— First boot will take up to 15 minutes
— Wait to unlock screen until it says to (with blinking arrows)
— After setup, let Google finish syncing before doing anything else
— Wifi may need read «error» after turning on. Try again and it will work.
— Enter APN information manually to get Data working properly.

To get data working:
1. Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Press the menu button and choose «New APN»
3. Enter your provider-specific information (Google is your friend
4. Press menu and select «Save»
5. Press the radius button next to your new APN and you’re good to go!

What doesn’t work:
— Camera Flash is still premature
— 011 dialing issue for non-US users (temporary solution found in this thread)
— G-sensor doesn’t respond well to being calibrated. Some have said that calibrating the phone facedown works, but this needs to be confirmed.

Сообщение отредактировал GarryBig — 22.11.10, 05:05

NexusHD2-FRG83 V1.2 [michyprima’s R11] noSense от 01.10.2010

* «Stock» build except banning ads (hosts file is replaced)
* Use michyprima’s R11 Kernel with AXI scaling (support for extended batteries)
* Create 512 MB data.img (You can specify the different data image size in startup.txt)
* Superuser privileges (su and busybox) included
* Some apps included (Delete any apk files in the AndroidApps folder before first boot if you don’t like any of them.)

What is working:

* WiFi
* GPS
* 3G/HSDPA
* 5MP Camera with flash
* Camcorder with flash
* Bluetooth
* LED status notification
* Keypad LED control
* WiFi Tethering/Hotspot

* USB Mass Storage (Only copying files from SD card to PC is working correctly.)
* Bluetooth calling (Someone has to test since I have no BT headset to test with.)
* Compass is inaccurate, this is known.

* Disable «auto-rotate screen» in «Display settings» if encountering the touchscreen freeze.
* Use SetCPU to undervolt and overclock. The max default is set to 998MHz.
* Turn off live wallpaper for better performance and battery life.
* I have included the following apps in the AndroidApps folder, they will be installed at first boot:
o Battery Indicator 3.0.1.apk
o ES File Explorer 1.4.6.apk
o Fancy Widget 1.3.0.apk (Time & Weather)
o Superuser 2.3.6.1.apk
o TasKiller 3.3.3 Free.apk
o TeslaLED Flashlight 2.0.3 Droi.apk
* About 3G/HSDPA:
o The stock Nexus One ROM only shows 3G icon in the status bar no matter if you are in HSDPA or not.
o You can check under «Settings > About phone > Status > Mobile network type». If it says HSDPA, you are on the 3.5G network («H» Network).
* Please install MoreLocale 2 from Android Market to enable more languages if needed.

1. Extract the Android folder (with all files in in) to root of your SD Card. THIS IS IMPORTANT.
2. If you already have an Android folder on your SD Card DELETE IT OR RENAME IT, because this version MAY BE INCOMPATIBILE with older releases .
3. After copyng everything to your SD Card ensure you have at least 600 Mb free space for data store
4. After you have done all steps go into Android folder and tap CLRCAD (for working sound), and after that just tap HaRET.
5. On first run when there is «Creating a new datastore» just give it time to complete, and on first boot be patient and give it time to load everything.
6. If you get some strange errors, or Android does not work, try to reformat SD card and try everything from the start.

>>>> All apps will now function and install correctly. If you have an issue installing an app from the Android Market or another source, then go through the following steps:
>>>> — Go to Settings > SD & phone storage > Unmount SD card
>>>> — Now install your app, it will now install correctly and function fine
>>>> — Go to Settings > SD & phone storage > Mount SD card

My HD2 WinMo Info (on this version rom was tested)
ROM: Stock 1.48.709.2 CHT
Radio: 2.12.50.02_2

Сообщение отредактировал GarryBig — 22.11.10, 05:18

Mdeejay FroYo G v.1.0|1.19.531.1 [huanyu#21] от 08.10.10

Features:
Kernel from huanyu #21
Without Sense
Only English & Spanish languages

Apps:
ES File Explorer
Task Killer
G-Script Lite
Fancy Widget 1.30
Google Sky Maps
Finance
Earth
Maps
My Tracks
Navigation
Listen
Photobucket
Speed Test
Superuser
Quadrant

What’s Working:
Lightsensor
Compass
G-Sensor
Bluetooth
GPS
Wi-Fi
USB Data Storage
3G/HSDPA Internet (PPP only)
LEDs
All other items working on other builds

What’s Not Working:
Camera

NEED ONLY NEW INSTALL

Installation:
— Place «Android» folder on the root of your SD card
— With keypad lights on, run «CLRCAD.exe» then «haret.exe»
— First boot will take up to 10-15 minutes
— Wait to unlock screen until it says to (with blinking arrows)

Instructions on APN settings:
1. Settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Push ‘Windows’ button, choose ‘New APN’
3. Enter all relevant information for your specific provider, you can likely google it.
4. When everything is entered, push ‘Windows’ key again, then ‘Save’.
5. Push on the radius button next to the new APN you created, it should turn green.

Сообщение отредактировал GarryBig — 22.11.10, 05:41

MCCM SE 2.5 withSense от 09.10.2010

Три версии UI
Fede.launcher-1 (Iphone iOS style)
LauncherPro (HTC Sense style)
Twlauncher-1 (Samsung Galaxy S style)
См.Скриншоты

1 GB memory
Full Ram
No freeze untill now
Camera 5mp (with flash), Video camcorder, market. all works
In Call loud (same time u had to lower the volume)
G-Sensor
Wi-Fi
Wi-Fi Hotspot
USB Tethering
USB Modem
USB Data Storage
LEDs
GPS
BT
Youtube
All other items working on other builds
Not Working:
FM Radio (can replace by internet Radio widget)
Going to settings/SD card and phone storage causes

Читайте также:  Как разблокировать смартфон самсунг андроид

сли есть проблемы с установкой программ

1-install Terminal Emulator
2-u should have Superuser to get to root
3-open Terminal Emulator
4-Press window button/Preferences/initial command
5-write
#su (enter)
fix_permissions (enter)
reboot
all application force close will vanished

Сообщение отредактировал GarryBig — 22.11.10, 11:52

Сообщение отредактировал GarryBig — 22.11.10, 11:58

NexusHD2-FRG83 V1.3 [michyprima R11] noSense от 12.10.2010

Release Notes:
V1.3
Add DSPManager app and related lib
Add some tweaks for Bluetooth headsets and replace some Bluetooth related libs
Bluetooth headset is fully supported in calls, music streaming/A2DP, and files transfer now. (But some BT headsets may not be compatible with this build.)
«Stock» build except blocking ads (hosts file is replaced) and adding «H» (HSDPA) icon and battery % icon
Use michyprima’s R11 Kernel with AXI scaling (support for «extended batteries»)
Create 512 MB data.img (You can specify the different data image size in startup.txt)
Rooted: superuser privileges (su and busybox) included
Some apps included (Delete any apk files in the AndroidApps folder before first boot if you don’t like any of them.)

(Что работает:)
WiFi
GPS (works great. I got a location within 15 seconds.)
3G/HSDPA
5MP Camera with flash
Camcorder with flash
Bluetooth (BT headset is fully supported in calls, music streaming/A2DP, and files transfer.)
LED status notification
Keypad LED control
WiFi Tethering/Hotspot
USB Mass Storage (Only copying files from SD card to PC is working correctly.)
Compass is inaccurate, this is known.

(Дополнениe)
Disable «auto-rotate screen» in «Display settings» if encountering the touchscreen freeze.
Install SetCPU to overclock. The default is set to 245MHz

998MHz.
Battery power consumption is about 1.5

2% per hour with the following SetCPU settings:
Main Tab: 1152max/245min, «conservative» Scaling, and check «Set on Boot»
Profiles Tab: check «Enable», and add «Screen Off» with 245max/245min powersave (Priority 50)
Turn off live wallpaper for better performance and battery life.
Install LauncherPro for a smoother home screen.
About 3G/HSDPA:
The stock Nexus One ROM only shows 3G icon in the status bar no matter if you are in HSDPA or not.
You can check under «Settings > About phone > Status > Mobile network type». If it says HSDPA, you are on the 3.5G network («H» Network).
With v1.3, I have included FRG83_stockbar_add-on_H_icon_and_battery%_icon.zip in the «Android/root» folder.
If you don’t like this add-on, please delete the folder named «root» located in the «Android» folder.
Please install MoreLocale 2 from Android Market to enable more languages if needed.

(Установленные приложения)
Battery Indicator 3.0.1.apk
DSPManager 1.0.apk
ES File Explorer 1.4.6.apk
Fancy Widget 1.3.0.apk (Time & Weather)
Superuser 2.3.6.1.apk
TasKiller 3.3.3 Free.apk
TeslaLED Flashlight 2.0.3 Droi.apk

Сообщение отредактировал GarryBig — 22.11.10, 13:18

Mdeejay FroYo Lex v.1.1|1.33.605.1 [hastarin R7.2] от 14.10.10

What’s Working:
Louder sound
Lightsensor
Compass
G-Sensor
Bluetooth
GPS
Wi-Fi
Wi-Fi Hotspot (3G Mobile Hotspot)
USB Tethering
USB Modem
USB Data Storage
HTC Sync / Media Sync
3G/HSDPA Internet (PPP only)
LEDs
All other items working on other builds

What’s Not Working:
Camera

Applications:
— Terminal Emulator
— GScript Lite
— Quadrant
— SpeedTest
— Maps
— EA Tetris (Demo)
— TaskKiller
— droCap 2
— ES Explorer

DO NOT CALIBRATE G-SENSOR!
Do not set Global Mode

Installation:
— Place «Android» folder on the root of your SD card
— Run «CLRCAD.exe» then «haret.exe»
— First boot will take up to 3-5 minutes (with data.img)
— Wait to unlock screen until it says to (with blinking arrows)

v. 1.1:
— Based on RUU v. 1.33.605.1 (13.10.2010)
— Back to stock fonts
v. 1.0.1:
— Added Auto APN
— Fix G-Sensor
— Other minor fixes
v. 1.0:
— First Release

Сообщение отредактировал GarryBig — 22.11.10, 13:47

FroyoStone Sense — V3.2 [linux_on_wince_htc 2.6.32.15] withSense от 17.10.2010

ARNING:
If you post in this thread knowing fine well that this is a HTC Sense build and you complain about sense anyway, then I will ignore your post completely.

If you want to update the kernel, I would recommend kernel builds by hastarin which has tweaks. http://forum.xda-developers.com/showthread.php?t=787588
If you have music stuttering, use this fix: http://forum.xda-developers.com/showthread.php?t=811248
If you have issues with data/PPP, look here for support: http://forum.xda-developers.com/showthread.php?t=794309

The problem is due to the combination of the EVO kernel and stagefright.

HTC Desire Sense build (FroyoSense V3.2) (Based on stock, no modification apart from camera app and superusers app) for HTC HD2 by darkstone:
My goal is to make a build that is close to stock as possible, but also has everything working. I’m getting there

Everything should be working, should be fast. Very fast.

Changelog for V3.2:

Fixed PPP disconnects (updated lib_htcril_wrapper)
Added more APN’s (T-Mobile users, I’m looking at you for cluttering up my thread )
Updated kernel to latest EVO commit as of 17-Oct-2010 00:44 from here: http://oe.netripper.com/files/htcleo. uild_evo_tree/
Re-enabled Stagefright for videos.
Some performance tweaks.
Camera flash now work correctly, this is fixed in the kernel.

If you are already using FroyoStone v3.1, you can upgrade to v3.2 easily, all you need to do is overwrite the system.ext2 and the zImage files on your SD card with the ones in this update. DO NOT REPLACE THE DATA.IMG IF YOU ARE AN EXISTING USER AND WANT TO KEEP YOUR FILES.
Included 1GB data.img by default, saves time waiting for your phone to create a 1GB data.img. Delete the included one if you want, the phone will create a new one.
If this is your first time running FroyoStone, you will need to reboot after completing setup for the first time. Users upgrading to v3.2 do not need to do this.

Notes:
A popup may show after taking a picture with the camera, this is normal. If you want to avoid seeing this, change the camera settings for Review Duration from 5seconds to off.
Cam is limited to 3mpx, partly due to the kernel and also the camera apk. I need to speak to AdamG and see how he fixed this when he ported Sense camera to Nexus One. IIRC he modified the HTCCamera.apk file.
720p video recording does not work, seems like H264 encoding is fudged. H263 seems fine, record fine at 800×480 resolution.
Wifi hotspot app is working fine
Make sure to reboot after first boot, apps needing root access won’t work. Phone calls will have no audio. Make sure you reboot!

// Creates a 1GB data.img if there is no data.img present. I have included a clean 1GB data.img for a quick first boot.
// Don’t worry about FB console not showing, that’s normal
// Copy the Android folder and the media folder to the root of your SD card so that you have two folders on your SD card, run CLRCAD.EXE and haret.exe on your HD2

Just want to point out that the HTC Desire is closest in terms of hardware to our HD2, that’s why I prefer cooking a Desire build and that’s why I will always choose Desire based builds over EVO and Desire HD builds.

Changelog for V3.1:

Fixes youtube green line/video quality issue
Ringtones/alarm sounds included by default, no need to download media.zip
Theme removed, using stock rom with no customizations
GScript removed, no need for it now, no touchscreen freeze
Switched to EVO kernel tree
Dropped FroyoStone Clean, there is no need for it anymore. Just use LauncherPro if you want stock-like home screen
Speed increase
Removed powersave on screen off feature
PPP only, no RMNET for data

Changelog for V2:
— Theme changed, more transparency
— Now creates 1 GB data.img
— PPP is now being used.
— Fixed APN/Sim card changed error.
— Using interactive cpu governor
— Capped CPU scale between 768mhz at the maximum and 245mhz and the minimum by default, use SETCPU to uncap this speed if you wish to benchmark.
— Powersave governor @ 245mhz used by default when screen is turned off.
— Bluetooth Headset now fully supported in calls.
— GPU performance tweaked, games and HTC Sense now run at a higher FPS. Check in NeoCore for difference in FPS between builds.
— Added a Stop G-Sensor and Start G-Sensor to GScriptLite program. Stop G-Sensor to avoid touchscreen freeze when not using the G-Sensor. Start G-Sensor when it is needed.

Сообщение отредактировал GarryBig — 22.11.10, 14:17

Источник

Оцените статью