Android wifi adb android studio

Using ADB on WiFi for Android Development

I used to struggle a lot when developing an Android application, mostly because the emulator is slow, and when using real device for development, the USB cable needed to connect my phone with my laptop is just as annoying as the slow emulator.

Luckily, ADB supported WiFi to connect the debug bridge between my phone and my laptop. Since then, I only used USB cable for setting up the ADB WiFi connection. Though most of the time I still enjoy using emulator because and the emulator has been made faster.

Setting Up the ADB to Connect Over WiFi

First, you have to connect your phone with your computer using aa USB cable. Make sure that the ADB detected your phone. If not, you might need to update the driver that connects your phone and your computer.

Second, open up a command prompt and navigate to your Android SDK location (on Windows you can find it inside your user folder if you install it on the default location e.g: C:\Users\YOUR-USERNAME\AppData\Local\Android\sdk\platform-tools). You probably want to add this path to your $PATH variable.

Type android devices -l to see list of the connected device. You should see your phone on the list.

Then type adb tcpip 5555 to run the ADB in TCP mode. The number after tcpip is the port you want to attach the ADB server on your phone. I use 5555 because it is easy to remember and no apps should be using that port.

You can now plug off the USB cable from your phone and computer, and then connect to your phone via WiFi by typing adb connect :5555 or any port you set the server to be running on, and try running adb devices -l again to check if the ADB TCP server is working correctly.

Everything should be set, if you press the Run or Debug button on Android Studio, you should see your device on the list of available devices to run your app on.

Читайте также:  Громкий музыкальный плеер для андроид

Say goodbye to USB cables and broken USB port on your phone.

Источник

Connect Android Device with Wifi within Android Studio

No More Cable Required.

May 31, 2018 · 3 min read

In Android Studio we have a lot of plugins available one of them is Android wifi ADB.

Every developer gets irritated when they used a cable to connect with the android device, the android cable itself irritating every time you need to plug the cable with your system this is so hectic isn’t?

So Android Studio comes up with the variety of plugins and Android wifi adb is one of them, so let’s started how you can set up this plugin in an android studio.

If you want to l earn through video then check the link below. Also, do subscribe to my channel for more Android-related videos.

Step 1:

Go to File -> Settings

Step 2 :

Go to Plugins and Browse the repository and Search Android Wifi ADB and install it.

Step 3:

Then restart your Android Studio and now you can see on the right-side panel the section of android wifi ADB, Now just plug your Android device and press the connect button after that the state will be “Connected”. Now you are able to do your testing through wifi.

That’s it you have done 🙂 now no more cable required every time.

If you want to become a Professional Photographer then check it out this below link.

Adobe Photoshop CC Advanced for Photography — John Academy

Learn the advanced functions of Adobe Photoshop CC to create and enhance your images, photos, artwork, and other…

I hope this article is helpful. If you think something is missing, have questions, or would like to give feedback, go ahead and leave a comment below. I’d appreciate the feedback.

I’ve written some other Android-related content, and if you liked what you read here, you’ll probably also enjoy this:

Define Resource Layout Id In the Constructor Activity/ Fragment — With AndroidX

Reduce the number of methods from your activity/fragment

Using Coil to Download Images on Android in Kotlin

A new way to download images on Android in Kotlin

Create an Instant App Using Android App Bundle

Using App Bundle in place of the deprecated Instant App feature plugin

Building UIs Using Android Jetpack Compose

No need to write XML layouts-Jetpack Compose will do the magic

Convert Your PNG & JPEG into WebP Images Android

Reduce more assets size with webP images

Sharing (knowledge) is caring 😊 Thanks for reading this article. Be sure to clap or recommend this article if you found it helpful. It means a lot to me.

Источник

Как отлаживать в Android Studio используя adb через WiFi

Я могу подключиться к своему телефону с помощью ADB Connect, и я также могу ADB Shell.

Но когда я иду в Run-> Device Chooser, там нет никаких устройств.

Что я должен сделать, чтобы подключить мою (подключенную) adb Android Studio?

Когда я подключаю его через USB, он появляется в списке

Вы можете найти инструмент adb в/platform-tools /

Читайте также:  Forkplayer для haier android tv

Вы можете проверить свои устройства, используя:

Установите порт TCP:

Чтобы установить соединение Wi-Fi, вы должны проверить IP вашего устройства и выполнить:

Попробуйте ниже плагин для Android студии

КАК

  1. Подключите устройство к компьютеру с помощью USB-кабеля.
  2. Затем нажмите кнопку на панели инструментов и отключите USB, когда плагин подключит ваше устройство через WiFi.
  3. Теперь вы можете развернуть, запустить и отладить ваше устройство, используя ваше соединение WiFi.

ПРИМЕЧАНИЕ: Помните, что ваше устройство и ваш компьютер должны быть в одном и том же соединении WiFi.

Шаг 1: Перейдите на свой Android sdk folder -> platform tools и скопируйте весь путь

Например: C:\Program Files (x86)\Android\android-sdk\platform-tools

Шаг 2: Перейти к командной строке или терминалу Android Studio

cd C:\Program Files (x86)\Android\android-sdk\platform-tools

Шаг 3: Подключите ваше устройство и систему с тем же Wi-Fi.

Шаг 4: Введите adb tcpip 5555 и нажмите Enter ,.

Шаг 5: Введите adb connect x.x.x.x:5555 , заменив xxxx на свой IP-адрес телефона ,.

узнать IP-адрес телефона

Settings -> About phone -> Status (некоторые телефоны могут отличаться)

Примечание. В случае, если вы подключаете более одного устройства, отключите другие телефоны, кроме того, который требуется подключить.

Снимок экрана командной строки:

Я использовал следующие шаги для успешной отладки через соединение Wi-Fi. Я рекомендую это решение для всех, кто испытывает проблемы с помощью интегрированных решений, таких какAndroid WiFi ADB плагин . В моем случае не удалось сохранить соединение Wi-Fi с моим устройством после отключения USB. Следующее решение преодолевает эту проблему.

1. Подключение устройства

а. Подключение устройства по локальной сети

Если у вас есть локальный WLAN, вы можете подключить ваше устройство Android и ваш компьютер к этому WLAN . Затем определите IP-адрес устройства Android, просмотрев его настройки WLAN.

б. Подключение устройства напрямую через точку доступа

Я предпочитаю подключаться к точке доступа на устройстве. Это более приватно и не открывает ваше отладочное соединение с (публичным) wlan.

  1. Создайте точку доступа Wifi на устройстве Android
  2. Подключите компьютер к точке доступа
  3. На ПК просмотрите состояние сетевого подключения этого подключения к точке доступа, чтобы найти IPADDRESS вашего устройства.
    Моя система показала IPADDRESS 192.168.43.1

2. Создать отладочное соединение

  1. Подключите ваше устройство к USB.
  2. Введите команду adb tcpip 5555 , чтобы открыть порт на устройстве для подключения adb.
  3. Создать беспроводное соединение для отладки adb connect IPADDRESS .
    В моем случае команда выглядела как adb connect 192.168.43.1

Команда adb devices -l теперь должна отображать два устройства, если все в порядке. Например:

3. Сохранение отладочной связи

Сложная часть возникает при отключении USB-соединения. В моем случае оба соединения закрываются немедленно! Это может быть не для всех пользователей. Для меня это было причиной того, что я не смог использовать Android WiFi ADB плагин для Android studio . Я решил проблему, вручную переподключив Wi-Fi после отключения USB от

После этого adb devices -l показывает одно устройство, подключенное к Wi-Fi. Это устройство также отображается в Android Studio и может быть выбрано для отладки. Когда соединение нестабильно, вам может понадобиться время от времени повторять вышеуказанную команду, чтобы восстановить соединение.

Источник

Беспроводная отладка Android 11

Режим дебага по WiFi теперь доступен, начиная с версии ОС Android 11. Давайте разберемся, как подключить устройство по Wi-Fi и смотреть логи в Logcat.

Нам необходимо убедиться, что у нас имеется все необходимое для соединения, а именно:

  1. установлен компонент Android SDK Platform-Tools версии не ниже 30.0.0 (April 2020), но естественно необходимо поставить последнюю версию, в которой разработчики пофиксили существующие на данный момент баги;
  2. включенрежим разработчика на вашем устройстве;
  3. на устройстве версия ОС Android 11.
Читайте также:  Tappsk для андроид аналог

Переходим в режим разработчика на нашем устройстве и активируем «Отладку по Wi-Fi».

Далее необходимо выбрать раздел «Подключить устройство с помощью кода подключения».

В боттомшите отобразится сам код подключения к устройству и IP-адрес и порт.

Откроем Android Studio, перейдем во вкладку Terminal, далее введем и выполним команду adb pair ipaddr:port где ipaddr и port — данные из боттомшита «Подключение к устройству». Следующим шагом — вводим код подключения и получим push на устройство об успешном подключении.

Перейдем на вкладку Logcat и все, что нам осталось — выбрать наше устройстве из списка подключенных устройств, в конкретном примере это Samsung SM-N985F.

Источник

Android wifi adb android studio

Android WiFi ADB — IntelliJ/Android Studio Plugin

IntelliJ and Android Studio plugin created to quickly connect your Android device over WiFi to install, run and debug your applications without a USB connected. Press one button and forget about your USB cable.

Android WiFI ADB plugin adds a button to your IntelliJ/Android Studio Toolbar to connect your device to your computer over WiFi.

To use this plugin the project opened in your IntelliJ/Android Studio has to be an Android project configured with the Android SDK.

Archived repository: Maintaining this project up to date for all the different Android devices without having access to the physical devices is not possible at all right now. Most of the bugs reported ar related to the adb installation and not to the plugin code so this repository will keep archived for now.

Connect all devices button:

Connect your device to your computer using a USB cable. Then press the button, and a notification will pop up saying that the phone has been connected. Disconnect your USB once the plugin shows your device is connected. Open the Android WiFi ADB tab at the right side to see all the devices and manage your connections. Your device will be connected over WiFi now. You can now deploy, run and debug your device using your WiFi connection. Remember that your device and your computer have to be in the same WiFi connection. Also, you have to first connect your device with a USB every time you open Android Studio, for setting up the connection over WiFi.

If you want to handle your devices connection individually, open the Android WiFi ADB dashboard you will find at the right of your IDE.

Download and install Android WiFi ADB directly from Intellij / Android Studio: Preferences/Settings->Plugins->Browse Repositories

Alternatively, you can download the plugin from the JetBrains plugin site and install it manually in: Preferences/Settings->Plugins->Install plugin from disk .

Build the project

If you need some information about how to build this project review IntelliJ Idea’s Gradle Plugin documentation.

Do you want to contribute?

Please, do it! If you have any improvement or you’ve found any bug, send a pull request with the code or open an issue 🙂

Источник

Оцените статью