- Your device is corrupt it can’t be trusted and may not work properly
- На каких устройствах происходит сбой
- Что делать при появлении надписи Your device is corrupt it can’t be trusted and may not work properly
- Как перепрошить Android
- [Guide]Remove «your device is corrupted and can not be trusted» issue
- Breadcrumb
- P53mutant
- MY DEVICE IS CORRUPT. It canT be trusted and wil not boot (PLEASE HELP ME)
- Breadcrumb
- dolip86
- kelv55l
- tknguyencsu
- leipnacht
- tknguyencsu
- leipnacht
- Sonu tuplondhe
- DieWalker
- «device is corrupt» solution guide for Nubia Red Magic 3 / 3S
- Breadcrumb
- leipnacht
- REDMAGIC 3 Global ROM flash instructions
Your device is corrupt it can’t be trusted and may not work properly
Владельцы смартфонов столкнулись с очередной проблемой – устройство самостоятельно выключается, после чего на экране появляется надпись “Your device is corrupt it can’t be trusted and may not work properly”. Дословный перевод фразы – “Ваше устройство повреждено и может работать некорректно”. Что делать для устранения сбоя читайте в статье.
Your device is corrupt it can’t be trusted and may not work properly
На каких устройствах происходит сбой
Ошибка выскакивает при различных обстоятельствах:
– после обновления ОС;
– появляется спустя некоторое время на аппаратах без проведения апдейта;
– на гаджетах только что купленных в салоне или Интернет-магазине.
Чаще такая неприятность возникает с бюджетными моделями смартфонов, среди которых много устройств китайского производства. Из-за стремления производителей сэкономить снижается качество выполняемых работ. Программное обеспечение часто устанавливается некорректным образом, что приводит к ошибкам и сбоям при эксплуатации устройства. В числе проблемных аппаратов: Oukitel, Хiaomi, Wileyfox, LG (LG K8 K350E), Asus (Asus zenfone), Sony, Honor и прочие.
Что делать при появлении надписи Your device is corrupt it can’t be trusted and may not work properly
1.Возврат. Сдать телефон в сервисный центр или вернуть производителю. Если аппарат новый и Вы не совершали действий, снимающих с него гарантию.
2. Если сбои начались после апдейта ОС – попробуйте откатить настройки до заводских.
3. На каких-то устройствах напротив, помогает обновление системы. Нужно скачать официальную последнюю версию прошивки, соответствующую Вашей модели смартфона и установить.
4. Установка сторонней прошивки. В большинстве случаев потребуется рутирование устройства – это снимает гарантию. Кроме того, процедура достаточно рискованная, если перепрошивка будет проведена некорректно – аппарат может перестать работать совсем. Особенно не рекомендуется проделывать это с китайскими бюджетными телефонами. Так, что этот способ Вы может выбрать только на свой страх и риск.
Как перепрошить Android
В ряде случаев устранить ошибку Your device is corrupt it can’t be trusted and may not work properly помогает переустановка системы.
Выполнить перепрошивку смартфона можно следующими способами:
– с помощью самого телефона;
– через компьютер.
Подготовка.
– Зарядите смартфон, лучше на 100%.
– Скачайте нужную версию ОС для Вашей модели телефона.
– Сделайте резервную копию программного обеспечения, установленного на Ваш смартфон и сохраните на другое устройство, например, на ПК.
При обновлении через компьютер, кроме упомянутых выше пунктов Вам понадобится:
– качественный USB-кабель, в случае плохого прохождения сигнала процедура может пройти некорректно;
– скачать и установить на ПК утилиту Fastboot или другую подходящую.
– Для установки кастомной прошивки через смартфон – скачайте программу CWM Recovery, TWRP или аналогичную.
Инструкция по перепрошивке Android
Для разных версий ОС схема может немного отличаться, но принцип выполнения одинаковый.
Сохраним резервную копию установленной ОС.
1. Откройте настройки смартфона (значок шестеренки), зайдите в “Сведения о системе”, затем в “Память” и нажмите кнопку “Резервная копия”.
2. Нажмите “Сделать бэкап”, поставьте галочки напротив нужных пунктов, тапните “Начать копирование”.
Система оповестит об окончания процесса копирования, после этого Вы можете перенести бэкап на другое устройство.
Установка официальной прошивки с помощью смартфона.
1. Скачайте на внешнюю карту памяти последнюю официальную версию ОС, соответствующую модели Вашего смартфона.
2. Выключите Android и зайдите в меню Recovery. Сочетание одновременно зажимаемых клавиш отличается зависимости от типа устройства.
Чаще всего выполняется одна из следующих комбинаций:
– увеличение громкости + уменьшение громкости + питание;
– уменьшение громкости + питание;
– увеличение громкости + питание;
– центральная кнопка + питание.
3. Откройте пункт “Apply update from external storage”, выберите файл прошивки и подтвердите действие.
4. После завершения процесса нажмите “Wipe data/factory reset” и подтвердите. Это очистит следы ПО установленного прежде, чтобы система работала без сбоев.
5. Перезагрузите устройство, выбрав пункт”Reboot system now”.
После этого надпись Your device is corrupt it can’t be trusted and may not work properly должна перестать появляться.
Для установки кастомной версии прошивки стандартное Recovery не подойдет. Нужно скачать и установить на смартфон программу CWM Recovery (ClockWorkMod Recovery), TWRP (TeamWin Recovery Project) иди другую подходящую.
Установка кастомной прошивки с помощью компьютера.
ВНИМАНИЕ! Для проведения процедуры потребуется доступ к ядру устройства и получение root-прав. Рутирование смартфона снимает действие гарантии. Не рекомендуется проводить с китайскими бюджетными аппаратами. Дальнейшие действия Вы выполняете на свой страх и риск. Изучите подробную информацию, касающуюся этого процесса на Вашей модели устройства.
Если процедура установки сторонней прошивки будет проведена корректно, фраза Your device is corrupt it can’t be trusted and may not work properly больше Вас не побеспокоит.
1. Скачайте на ПК программу Fastboot.
2. Создайте папку для загрузки системы на диске С, например, С:\fastboot – так будет проще прописывать путь к прошивке.
3. Разблокируйте Bootloader. В большинстве устройств разработчики блокируют доступ к ядру системы. Снять блокировку можно с помощью программы Bootloader, так мы получим доступ к системе или root-права. Для разных производителей устройств рутирование выполняется с помощью разных программ. Нужно найти в сети подходящую именно для Вашего смартфона.
Выполнение процедуры у всех проводится похожим образом.
– Скачайте и установите программу.
– Подключите смартфон к ПК по USB в режиме отладки. Для этого войдите в раздел настроек «Для разработчиков» и выберите «Отладка по USB».
– Затем откройте скачанную программу и подтвердите на смартфоне нажав кнопку «Unlock»
– Когда процесс разблокировки закончится нажмите “Finish”.
4.1. Подключите смартфон к ПК в через USB-кабель в режиме отладки.
4.2. Перенесите скачанный файл с прошивкой в созданную папку на диске – С:\fastboot.
4.3. Переключите смартфон в режим fastboot mode. Вызовите командную строку – Win + R введите слово CMD, нажмите Enter. В строку должны быть введены следующие команды:
С:\Users\Имя пользователя латиницей>cd /
С:\>cd С:\fastboot
С:\fastboot>reboot bootloader
4.4. Форматируем все каталоги смартфона. Впишите в командную строку команды по очереди, нажимая после каждой “Enter”:
fastboot erase boot
fastboot erase userdata
fastboot erase system
fastboot erase recovery
fastboot erase cache
4.5. Активируйте из папки с прошивкой bat-файл flash-all.
4.6. После успешного окончания процесса появится соответствующее уведомление. Перезагрузите смартфон.
Источник
[Guide]Remove «your device is corrupted and can not be trusted» issue
Breadcrumb
P53mutant
Senior Member
*****Please keep in mind that there are 3 types of warning messages appear in our device ASUS max pro m1 (601/602) so verify what type of warning it is and follow according to that*****
***** 3 types of warning*****
UNLOCKED BOOTLOADER WARNING
• it will appear if you unlock your bootloader by unofficial method or official method. Right now, there is no way to remove this warning unless you lock your bootloader again or flash fast boot(service)rom.
DM-VERITY ERROR [IN RED FONT]
•
K. On successful command entry your device will reboot and now no more red warning.
e) On successful command entry your device will reboot and now no more red warning.
Device will reboot on successful command entry
see image – this is different from above one. In this error will be like this “your device will shutdown in 30secs”
This type of warning appears if you relock your bootloader with custom rom, kernel, recovery, or with magisk root / or faulty boot.img / or faulty recovery.img
So, for this type of warning you can do below steps
a. Unlock your bootloader via unofficial method> remove root (by flashing magisk uninstaller) and remove custom recovery (by flashing official recovery) and then relock bootloader
b. Or you can flash fast boot (service) rom but in this you will lose all your internal storage
Источник
MY DEVICE IS CORRUPT. It canT be trusted and wil not boot (PLEASE HELP ME)
Breadcrumb
dolip86
Member
before i use room global. i change to room china. after reboot.
stuck and can’t do anything. please anyone know how to fix??
«your device is corrupt. it can’t be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me.
kelv55l
Member
before i use room global. i change to room china. after reboot.
stuck and can’t do anything. please anyone know how to fix??
«your device is corrupt. it can’t be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me.
tknguyencsu
Senior Member
before i use room global. i change to room china. after reboot.
stuck and can’t do anything. please anyone know how to fix??
«your device is corrupt. it can’t be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me.
If you can get into recovery then wipe data and then cache partition to see if you phone boot up. If you get stuck in bootloader mode then try to flash the system image from the following site:
https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
After you flash the system image you should then be able to get into recovery to flash the rom you want. If you cannot get into recovery after flashing the system.img then you need to download all the files given in the above site and flash them.
leipnacht
Senior Member
If you can get into recovery then wipe data and then cache partition to see if you phone boot up. If you get stuck in bootloader mode then try to flash the system image from the following site:
https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
After you flash the system image you should then be able to get into recovery to flash the rom you want. If you cannot get into recovery after flashing the system.img then you need to download all the files given in the above site and flash them.
tknguyencsu
Senior Member
leipnacht
Senior Member
New member
Hi bro, i go the same problem as you, my Z20 got stuck after upgrade chinese room
before i use room global. i change to room china. after reboot.
stuck and can’t do anything. please anyone know how to fix??
«your device is corrupt. it can’t be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me.
Sonu tuplondhe
New member
DieWalker
Member
I know how to 100% fix the problem
before i use room global. i change to room china. after reboot.
stuck and can’t do anything. please anyone know how to fix??
«your device is corrupt. it can’t be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me.
Just go the this forumhttps://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044 and download the tool (if you have global model so download non eu and if you have Europe model so download eu version ) install the software in your computer and go to fastboot mode in your phone (by pressing [volume down+power button] ) and then select eld mode in your phone and connect it to your computer and then follow the instructions carefully I mean really CAREFULLY in your computer . Now sitback and wait until flashing finished, your phone will reboot automatically. Congratulations you fixed your phone . (THE ONLY PROBLEM WITH THIS METHOD IS YOU PUSHED BACK TO OLD VERSION OF SOFTWARE YOU HAVE TO UPDATE AFTER YOUR PHONE UNBRICKED) I am also a guy who went all this **** about 6 month ago it also took me 2 weeks to fix my red magic 3
Next time if you wanna go to cn then first unlock orm from developer option it will help
Have a nice day:fingers-crossed:
———- Post added at 06:38 PM ———- Previous post was at 06:36 PM ———-
Источник
«device is corrupt» solution guide for Nubia Red Magic 3 / 3S
Breadcrumb
leipnacht
Senior Member
Sharing this guide seems quite late but since xda red magic threads taught me a lot about the rooting and corrupted stuffs, I think it would not hurt to return something back to this community.
This is my attempt to compile people’s responses that helped other people here which are scattered around forums.
Myself included also tinkered a lot on this device and literally go back here on this guide to lessen headaches.
EDIT: Tested a lot of times with V5.08 and V5.09 Android R versions REMINDER: Tested on Android 9, no clues yet on Android 10 and 11
WHEN TO USE?
Use this guide to restore your phone to boot in Android OS again normally without wiping data, retaining your apps, games intact
Requirements:
— Windows computer. NOTE: Done this using Windows 10, so I’m not exactly sure if latest ADB works the same on Windows 7.
— Nubia Red Magic 3 or 3S battery charge should be at 50% above at least.
— You need a USB cable to connect your phone to PC. XDA Users reported better with USB 2.0 port
NOTE: Can be used also on 3S. I just don’t have 3S so I haven’t tested it on actual 3S.
Download latest the ADB (Android Debug Bridge) from Android Developers site.
1.) Go to https://developer.android.com/studio/releases/platform-tools
2.) Click Download SDK Platform-Tools for Windows.
3.) Click the checkbox beside ‘I have read and agree with the above terms and conditions’
and click DOWNLOAD ANDROID SDK PLATFORM-TOOLS FOR WINDOWS
*Current version as of December 12, 2020
platform-tools_r30.0.5-windows.zip
4.) Create a folder in C:\ Drive and name it ADB. Extract platform-tools_rxx.x.x-windows.zip inside ADB folder.
*NOTE: rxx.x.x on platform-tools_rxx.x.x-windows depends on the current version available on Android Developers site.
5.) On your Windows desktop, press the Window logo button on your keyboard, type ‘cmd’. Right-click on Command Prompt and click Run as administrator.
7.) On command prompt, type ‘cd c:\ADB’ and press Enter. *type without quotes *DO NOT CLOSE Command prompt!
8.) Connect your Nubia Red Magic 3 or 3S to a USB 2.0 port.
9.) Wait for Windows to install drivers of your phone. If a CD Drive showed up on «This PC / My Computer», double-click on it and install the driver.
10.) Type ‘adb reboot bootloader’ and press Enter. *type without quotes
11.) Go back to your command prompt. Type ‘fastboot devices’. It should show your phone’s serial number and a ‘fastboot’ word. This means your PC can properly communicate with your Nubia Red Magic 3. *DO NOT CLOSE Command prompt!
12.) Get your ROM ready. Download from these official links if you haven’t already.
IMPORTANT: Try to remember the specific version of ROM your Red Magic has.
Because for example if the currently installed is Android 11 (R) but you used the lower version say Android 10 or 9, flashing will proceed but it will not boot to Android OS
For Global, Europe and North America versions:
REDMAGIC 3 Global ROM flash instructions
13.) Extract the zip file to any folder you want. Get inside it and copy the following:
* parameter.img
* boot.img
* recovery.img
* splash.img
* dtbo.img
* vbmeta.img
* NON-HLOS.bin
* dspso.bin
14.) Continuing from the step above, paste the files you copied to ADB folder you created from step 4.
15.) Go back to your command prompt. And type and press Enter the below commands one by one:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot erase parameter
fastboot flash parameter parameter.img
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase splash
fastboot flash splash splash.img
fastboot erase dtbo
fastboot flash dtbo dtbo.img
fastboot erase vbmeta
fastboot flash vbmeta vbmeta.img
fastboot erase modem
fastboot flash modem NON-HLOS.bin
fastboot erase dsp
fastboot flash dsp dspso.bin
*Disconnect the USB-C cable from your NRM3/3S
16.) Your phone still on fastboot, press volume down to choose «Reboot to recovery mode» and press power button to confirm.
17.) Your phone should boot to recovery. On the recovery Main Menu, press volume down to choose ‘Wipe Data’, choose Wipe cache and also User partition.
18.) After the wipe is successful, copy the ROM zip file to your USB flash drive. Insert your USB Flash drive to your OTG USB-C adapter. Then finally insert it to your Nubia Red Magic 3/3S USB-C port.
19.) Your phone still on recovery, select «Choose Update Package» and specify the ROM zip file in your USB OTG device.
20.) Wait for the system installation to finish.
Alternatively, you can view the guide’s pastebin. Plain and simple layout especially when you are just using data on your phone
Solution for Nubia Red Magic 3 / 3S «device is corrupt»
Источник