- Воспроизведение цифрового звука с высокой частотой дискретизации на компьютерах Mac
- Question: Q: Audio not working on Windows 10 installed on external SSD running on iMac
- Question: Q: No audio in windows 10
- All replies
- Исследование звукового тракта iTunes
- Пролог
- Оборудование и ПО
- Настройки
- Информация от спонсора
Воспроизведение цифрового звука с высокой частотой дискретизации на компьютерах Mac
Аудиооборудование некоторых компьютеров MacBook Pro, Mac Pro и iMac поддерживает воспроизведение звука с частотой дискретизации 176,4 и 192 кГц при подключении через цифровой оптический выход.
Ниже приведены модели компьютеров, которые поддерживают частоты дискретизации вплоть до 192 кГц при воспроизведении звука:
- MacBook Pro (с дисплеем Retina, 13 дюймов, конец 2013 г. – начало 2015 г.)
- MacBook Pro (с дисплеем Retina, 15 дюймов, конец 2013 г. – середина 2015 г.)
- iMac (21,5 дюйма, середина 2014 г. – конец 2014 г.)
- iMac (с дисплеем Retina 4K, 21,5 дюйма, конец 2015 г.)
- iMac (с дисплеем Retina 5K, 27 дюймов, конец 2014 г. – конец 2015 г.)
- Mac Pro (конец 2013 г.)
- Mac mini (конец 2014 г.)
Чтобы подготовить компьютер Mac к воспроизведению звука с высокой частотой дискретизации, выполните следующие действия.
- Подключите один из концов оптического кабеля TOSLINK к порту наушников на компьютере Mac, а второй — к аудиоустройству, например аудиовидеоресиверу.
- Откройте программу «Настройка Audio-MIDI» в подпапке «Утилиты» папки «Программы».
- Слева в окне «Аудиоустройства» выберите из списка аудиоустройство.
- При необходимости выберите «Использовать это устройство для вывода звука» во всплывающем меню «Действие» .
- Выберите частоту дискретизации, например 176400,0 Гц или 192000,0 Гц во всплывающем меню «Формат».
Если звуковое оборудование компьютера Mac не поддерживает аудио с высокой частотой дискретизации, можно использовать сторонний интерфейс цифрового звука.
Информация о продуктах, произведенных не компанией Apple, или о независимых веб-сайтах, неподконтрольных и не тестируемых компанией Apple, не носит рекомендательного или одобрительного характера. Компания Apple не несет никакой ответственности за выбор, функциональность и использование веб-сайтов или продукции сторонних производителей. Компания Apple также не несет ответственности за точность или достоверность данных, размещенных на веб-сайтах сторонних производителей. Обратитесь к поставщику за дополнительной информацией.
Источник
Question: Q: Audio not working on Windows 10 installed on external SSD running on iMac
I installed Windows 10 (April 18 update) on external SSD drive that can be selected on the iMac’s startup. Run the Boot Camp Windows Support Software and everything is fine, Apple mouse & keyboard, except audio is missing. Windows 10 Device Manager app does not show any problems with the drivers such as yellow triangles or red crosses. In fact, when a video is played the green volumen bars in the audio device driver properties move but there is no sound at all.
- iMac is the latest 2019 model.
- Windows 10 is up to date according to Windows update app (had to use April 18 update as start version since the installation does not work with October 18 version).
- Drivers are update to date according to Windows.
- Installed Windows 10 on external SDD following these instructions: https://blog.macsales.com/40947-tech-tip-how-to-use-boot-camp-on-an-external-drive, https://medium.com/@svenkirsime/install-windows-on-the-external-ssd-hdd-for-your-mac-5d29eefe5d1, https://www.youtube.com/watch?v=910Y1hLreRc&t=117s.
iMac Line (2012 and Later)
Posted on Apr 19, 2019 1:38 AM
I had the same problem as you with a 2019 27” iMac with Windows 10 (1809) on external SSD with no sound to speakers or headphones. After a lot of Google searches I started to suspect a problem with the High Definition Audio Device (not the AMD one, if you have one) in the Device Manager (Sound, video and game controllers) due to it using a standard Microsoft driver. One search result mentioned replacing the driver with the one in the Cirrus folder from the BootCamp drivers (WindowsSupport/$WinPEDrivers$). After confirming the driver in the Cirrus folder is a High Definition Audio driver, I did an update of the driver in Device Manager and pointed it at the Cirrus folder for the location. I got confirmation that the install was successful and the sound started working (no reboot).
I had assumed that running setup (more than once in my case) in the WindowsSupport folder would install all the drivers necessary, but clearly I was wrong.
Источник
Question: Q: No audio in windows 10
Ok here is a good one.
I am building some MacBooks with windows only for a few friends.
I am doing A1278 versions.
I am maxing out the Ram and installing an SSD in as well for them.
So i used the factory HD to make sure windows 10 would install correctly and work correctly. This was on a A1278 with 2.4 core 2 duo. Nvidia chipset graphics. I installed boot camp and everything works correctly. So i pulled out that HD and swapped in an SSD and installed windows with bootcamp and done all good.
I got a 2nd A1278 with 2.3 i5 processor intel chipset graphics. I put that same test HD in with windows 10 on it and it installed everything correctly and everything worked with that mac’s version of bootcamp. The sound works correctly.
So I installed an SSD and installed windows 10 on it. And I cannot figure out how to get the audio to work at all. I keep getting fault code 10. I have tried everything i know and I can’t get it to work at all. And i know its not a hardware issue. I can’t figure out how to get the right drivers on there for it to install correctly.
What can i do to fix this issue.
Posted on Apr 2, 2017 7:27 PM
All replies
Loading page content
Page content loaded
So I installed an SSD and installed windows 10 on it. And I cannot figure out how to get the audio to work at all. I keep getting fault code 10. I have tried everything i know and I can’t get it to work at all. And i know its not a hardware issue. I can’t figure out how to get the right drivers on there for it to install correctly.
Did you check the Device Manager for any unknown devices? Did you install the SSD on the Intel GPU Mac or the nVidia GPU Mac? Did you install Windows on the SSD from scratch using BC Assistant?
Apr 2, 2017 7:57 PM
I used a factory drive the non ssd and installed windows 10 without boot camp. Just installed windows 10 straight with booting off the disc. And fresh install on the Nvidia chipset laptop. Then ran all windows updates and installed the boot camp installed and everything worked correctly.
Then I took that same drive and put it into the intel chipset and then installed the boot camp for that laptop version and everything works correctly.
The platter hard drive is for testing only.
Then I put a fresh SSD into the intel laptop and installed windows 10 like I did the other hd and updated to latest updates and then installed boot camp and everything by sounds works. I tried to update chipset to latest version.
If I’m correct it needs to install the high depth audio controller before it installed the speakers and mic and stuff like that and I can’t get it to install correctly.
Apr 3, 2017 7:02 AM
On the Mac where Audio does not work, can you run msinfo32 and check the BIOS Mode value?
Apr 3, 2017 7:14 AM
It’s not a bios issue. It’s a driver problem. It works fine with one hard drive and not the other so it’s deff a software issue.
Apr 3, 2017 7:59 AM
If you install W10 using UEFI, Audio on the A1278 will not work. This is why we need to check what is the mode of the installation. Bypassing BC Assistant usually creates a problem because the installation type is chosen incorrectly. If there is no hardware exposed, drivers do not work.
Apr 3, 2017 8:36 AM
What do you mean UFEI? Well I installed windows 10 the same way on each hard drive. The only difference was that it was in thr Nvidia chipset first before it went into the intel chipset laptop. But both were installed the same identical way as far as the OS is concerned.
I don’t think BC matters because it works on that one hard drive. I don’t want OSX on it at all. I ran the BC installer once I had windows up and going.
What do you think about installing windows 8.1 then if the driver works then upgrade to windows 10.
Apr 3, 2017 9:20 AM
What do you mean UFEI? Well I installed windows 10 the same way on each hard drive. The only difference was that it was in thr Nvidia chipset first before it went into the intel chipset laptop. But both were installed the same identical way as far as the OS is concerned.
There are two types of Windows installations. EFI and BIOS. EFI does not work correctly on Macs older than late 2013 models. Macs prior to late 2013 require BIOS otherwise Audio does not work. This is achieved by creating a Hybrid MBR using BC Assistant. If you do not use BCA, it is a guessing game on which type is installed. This is why msinfo32 will show you what type of the installation it is.
There are differences in Audio when installed on a nVidia (discrete GPU) Mac vs a Intel-only Mac (integrated GPU). W10 has no Apple-certified drivers on Macs older than 2012 Macs. Generic drivers must see hardware correctly to work. If you are moving hard disks around between these two models, you are creating issues for yourself.
I don’t think BC matters because it works on that one hard drive. I don’t want OSX on it at all. I ran the BC installer once I had windows up and going.
The BC Driver installer is unrelated to BC Assistant . BC Assistant downloads the correct BC drivers based on Mac Model identifiers. If you do not use BCA, you must create the appropriate disk partitions and MBRs as necessary, before you install Windows.
What do you think about installing windows 8.1 then if the driver works then upgrade to windows 10.
If W8.1 is supported on your model and you have the correct disk partitioning structures, then you can start with W8.1 otherwise you will need W7 (or WXP) and upgrade it to W10.
See the following links for supported versions of Windows on Mac hardware.
Here is an example of a W10 installation on a 2012 Intel-only MBP.
/dev/disk0 (internal, physical):
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *512.1 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS OSY-MBP13 380.3 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data BOOTCAMP 131.0 GB disk0s4
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 62260/255/63 [1000215216 sectors]
#: id cyl hd sec — cyl hd sec [ start — size]
1: EE 0 0 2 — 25 127 14 [ 1 — 409639]
2: AF 25 127 15 — 1023 250 4 [ 409640 — 742676624] HFS+
3: AB 1023 250 5 — 1023 1 27 [ 743086264 — 1269536] Darwin Boot
*4: 07 1023 2 5 — 1023 121 5 [ 744355840 — 255858688] HPFS/QNX/AUX
Notice the Cirrus Audio devices and the BIOS Mode shown in the following image. Audio works.
Источник
Исследование звукового тракта iTunes
Пролог
Отчасти по инерции, отчасти — по просьбе одного из пользовтелей сайта, я решил провести очередное исследование. Сегодня у нас в лаборатории детище корпорации Apple. Еще один продукт для широкого потребителя, не отличающийся высокой конфигурируемостью, с множеством странных (по моему мнению) и ненужных функций, а также интеграцией интернет-магазина. Во многом этот продукт напоминает мне Windows Media Player от Microsoft. Ну, что ж, пользуются и WMP, и iTunes тоже кто-то пользуется. Так что, как говорится, «сейчас мы их проверим, сейчас мы их сравним. ». Сегодня у нас будет что-то вроде баталии между Microsoft и Apple. Посмотрим, кто кого.
Оборудование и ПО
200?’200px’:»+(this.scrollHeight+5)+’px’);»> Intel Core i3 2.93 ГГц, ASUS P7H55-V, 4 ГБ DDR3, Creative X-Fi Xtreme Gamer
Microsoft Windows 7 Ultimate SP1 x64
iTunes 11.0.6.5
RightMark Audio Analyzer 6.3.0
Sony Sound Forge 10.0c
Настройки
Первый взгляд на настройки плеера заставляет русского человека невольно сконфузиться. Странно, что корпорация Apple не нашла нормального переводчика, разбирающегося в цифровом звуке, который бы сделал нормальную локализацию iTunes.
Остается только догадываться, что здесь имелось ввиду «воспроизведение через», «частота дискретизации» и «бит на семпл». Я уже не говорю о том, что один вид ползунка «улучшение звука: слабо/сильно» вызывает просто таки гомерический смех.
Но давайте перейдем к делу. Проверим, как работают все эти настройки.
Итак, сегодня я проверяю на слух. Для начала берем нашу любимую синусоиду 24/44.1 с уровнем -80 дБ. В режиме DirectSound 16/44.1 явно слышны искажения, что обусловлено отбрасыванием младших 8 битов без дезеринга. Если установить разрядность в 24 бита, всё играет нормально. Далее — если изменить режим вывода на сеанс Windows Audio (имеется ввиду Windows Audio Session) и перезапустить плеер (необходимо для смены режима), то настройки разрядности уже на звучание не влияют — очевидно, программа начинает выводить в режиме, заданном в настройках устройства Windows (там установлено 24/44.1). Что касается семплрейта — то эта настройка вообще ни на что не влияет, в обоих режимах. Очевидно, плеер продолжает выводить аудио с оригинальной частотой дискретизации, предоставляя ресемлирование операционной системе. В общем-то, это хорошо, иначе была бы проблемы фиксированной частоты — как у AIMP3.
Теперь посмотрим, как iTunes воспроизводит свой родной-любимый формат Apple Lossless (ALAC). Закодируем тестовый сигнал формата 24/96 и прогоним через плеер.
Что ж, порядок. Никакой обработки, никаких искажений. Это хорошо. Перейдем к lossy. Начнем с MP3 из 24-битного источника. Напомню: у нас стоит вывод через Windows Audio Session, формат 24/44.1.
И тут iTunes радует нас 24-битным декодированием MP3. В самом деле, приятная неожиданность. Более того — результаты декодирования идентичны результатам foobar2000. Также всё хорошо у плеера и с форматом AAC.
И у нас остается последний пункт — клиппинг. Проверяем на MP3 и AAC файлах с превышением уровня в 6 дБ.
И тут у нас интереснейшая картина. На MP3 я получил клиппинг с любыми настройками, в обоих режимах. Это говорит о том, что декодирование MP3 выполняется с фиксированной точкой (скорее всего 24-bit integer). ReplayGain iTunes, по-видимому не читает. Но куда интереснее с AAC — в режиме Windows Audio Session я явно услышал, как сработал лимитер. Не изначально было неясно, что это за лимитер — в плеере, или же в Windows (limiter APO). Переключившись на DirectSound, я понял, что лимитер срабатывал в микшере Windows, т.е. плеер до этого выводил аудио в режиме с плавающей точкой. Но дальше я обнаружил другую особенность — в свойствах трека (в плейлисте iTunes) есть вкладка, где можно регулировать громкость:
Так вот, если сдвинуть ползунок громкости в любую сторону на минимальное расстояние, включается лимитирование сигнала! Надо полагать, это уже встроенный лимитер плеера, призванный предотвратить клиппинг при чрезмерном повышении громкости. Но для MP3 этот трюк конечно же не работает — клиппинг происходит еще на этапе декодирования.
Таким образом, для iTunes мы получаем следующее:
+ аккуратное декодирование lossless и lossy, в т.ч. с высокой разрядностью;
+ 24- или 32-битный с плавающей точкой вывод;
+ сохранение оригинальной частоты дискретизации — все преобразования выполняет Windows;
— отсутствие поддержки ReplayGain;
— декодирование MP3 в формате с фиксированной точкой.
В общем и целом WMP c iTunes оснащены простенькими, практически одинаковыми по функционалу звуковыми движками. Но если судить строго, у iTunes мы имеем небольшое преимущество в виде 24-битного декодирования MP3. Так что фанаты Apple могут возрадоваться и спокойно слушать AAC на своём любимом iTunes.
А я тем временем пошел чистить систему от установленного с плеером мусора.
Информация от спонсора
220-110.РФ: здесь Вы можете приобрести высококачественные повышающие и понижающие трансформаторы 220-110 В. В наличии преобразователи напряжения различных форм-факторов и мощностей (300-10000 Вт). Также здесь можно приобрести переходники для самых различных электрических розеток и вилок.
Источник