Apple core mod что это

Apple Core – очередной замечательный мод для игры Майнкрафт. Он славится тем, что предусматривает новую механику еды и голода. Помимо этого, владелец AplleCore сможет полностью ознакомиться с полезной информацией, касающейся определенной разновидности еды. Большой частью, мод AppleCore является вспомогательным.

Помимо вышеперечисленных возможностей, AppleCore представляет возможность изменения функционала еды и голода. Но, не следует самостоятельно его изменять, если вы не разобрались с этим модов. Ведь это может привести к неполной работоспособности самого мода.

Также автор мода предвидел тот факт, что большая часть игроков пользуется ресурс-паками и другими модами. Поэтому он и сделал полную оптимизацию. Теперь вы сможете пользоваться не только этим модом, но и совмещать его с другими.

Измененные индикаторы еды и голода

Как было упомянуто ранее, с помощью этого мода, игровой функционал еды и голода станет более удобным, чем был раньше.

• Во время зажатия кнопки «Shift», игроки смогут увидеть питательную ценность определенной разновидности еды. С помощью этой возможности, можно точно рассчитать, сколько и какой еды нужно съесть для полного утоления голода. Это особенно важно в режиме «Хардкор», на начальных стадиях игры;

• Теперь, чтобы узнать, насколько будет полезна вам еда, хватит навести на нее курсором. После этого вы увидите, что начнут мигать индикаторы голода. И с помощью этого, вы узнаете, сколько «голода» вам восстановит определенный продукт;

• Помимо этого, вы будете наблюдать за тем, как ваш персонаж голодает. Индикаторы также будут мигать, и полностью покажут вам, когда вы проголодаетесь. Иными словами, вы сможете рассчитать, сколько времени продержится ваш персонаж без пищи.

Но, в первую очередь вам придется убедиться, что вы пользуетесь именно версией игры 1.7.10. Ведь этот мод представлен только для единственной версии. Если же попытаться установить его на более новую, или же наоборот, старую, версию игры, то вы заметите, что AppleCore не будет полноценно работать. Поэтому обратите на этот факт внимание! Это важно!

А для новичков специально написан небольшой гайд, который ответит на вопрос: «Как установить мод». Это очень просто!

Установка мода Apple Core

• В первую очередь, для полной установки вам нужен Minecraft Forge;
• Если он есть, то займитесь скачиванием мода AppleCore для Minecraft 1.7.10;
• После того, как он оказался на вашем компьютере, скопируйте целостный архив и поместите в папку .minecraft/mods. Готово! Перезапустите лаунчер и заходите в игру!

Источник

AppleCore – GUI Mod For Minecraft 1.10.2, 1.9.4, 1.8.9, 1.7.10

This small modification contains only two great features. First, this is a secondary core that needs some modifications. And secondly, it has a lot of informative hints about food and hidden parameters. This is mainly useful for beginners who do not know how much a particular food restores health points.

Screenshots

Review

How to install AppleCore

Download and install Forge
Make sure that you have the “Java” application installed.
Download the “Zip” archive from our website.
Inside this is a “Jar” mod. It can also contain old and new builds.
Select the latest version of the “Jar” file that matches the game version.
Please note that some releases may contain bugs, incompatibilities with other modifications, and in some cases may cause conflicts within Forge or Fabric. You can try installing the previous build to fix this.
Move the “Jar” file to the “Mods” folder.
This folder is located at the following path:

Mac OS X:
/Users/Your Profile Name/Library/Application Support/minecraft/
Quick way to get there: Click on the desktop and then press the combination of “Command+Shift+G” keys at the same time.
Type

/Library and press the “Enter” key.
Open the Application Support folder and then Minecraft

Windows 11, 10, 8, 7:
C:\Users\Your Profile Name\AppData\Roaming\.minecraft\
Quick way to get there: Press the “Windows” key and the “R” key at the same time.
Type %appdata% and press “Enter” key or click OK.

The “Mods” folder is created automatically when you install Forge or Fabric, but you can always create it manually.

Open the launcher and select the desired modloader.

Launch the game and enjoy the new gameplay.

Ready!

Источник

# Desktop Haswell and Broadwell

Support	Version
Initial macOS Support	OS X 10.8, Mountain Lion

# Starting Point

So making a config.plist may seem hard, it’s not. It just takes some time but this guide will tell you how to configure everything, you won’t be left in the cold. This also means if you have issues, review your config settings to make sure they’re correct. Main things to note with OpenCore:

All properties must be defined, there are no default OpenCore will fall back on so do not delete sections unless told explicitly so. If the guide doesn’t mention the option, leave it at default.
The Sample.plist cannot be used As-Is, you must configure it to your system
DO NOT USE CONFIGURATORS, these rarely respect OpenCore’s configuration and even some like Mackie’s will add Clover properties and corrupt plists!

Now with all that, a quick reminder of the tools we need

And read this guide more than once before setting up OpenCore and make sure you have it set up correctly. Do note that images will not always be the most up-to-date so please read the text below them, if nothing’s mentioned then leave as default.

This is where you’ll add SSDTs for your system, these are very important to booting macOS and have many uses like USB maps

(opens new window) , disabling unsupported GPUs and such. And with our system, it’s even required to boot. Guide on making them found here: Getting started with ACPI

For us we’ll need a couple of SSDTs to bring back functionality that Clover provided:

Required SSDTs	Description
SSDT-PLUG (opens new window)	Allows for native CPU power management on Haswell and newer, see Getting Started With ACPI Guide (opens new window) for more details.
SSDT-EC (opens new window)	Fixes the embedded controller, see Getting Started With ACPI Guide (opens new window) for more details.

Required SSDTs

Description

SSDT-PLUG

(opens new window)

Allows for native CPU power management on Haswell and newer, see Getting Started With ACPI Guide

(opens new window) for more details.

SSDT-EC

(opens new window)

Fixes the embedded controller, see Getting Started With ACPI Guide

(opens new window) for more details.

Note that you should not add your generated DSDT.aml here, it is already in your firmware. So if present, remove the entry for it in your config.plist and under EFI/OC/ACPI.

For those wanting a deeper dive into dumping your DSDT, how to make these SSDTs, and compiling them, please see the Getting started with ACPI

(opens new window) page. Compiled SSDTs have a .aml extension(Assembled) and will go into the EFI/OC/ACPI folder and must be specified in your config under ACPI -> Add as well.

# Delete

This blocks certain ACPI tables from loading, for us we can ignore this.

# Patch

This section allows us to dynamically modify parts of the ACPI (DSDT, SSDT, etc.) via OpenCore. For us, our patches are handled by our SSDTs. This is a much cleaner solution as this will allow us to boot Windows and other OSes with OpenCore

# Quirks

Settings relating to ACPI, leave everything here as default as we have no use for these quirks.

# Booter

This section is dedicated to quirks relating to boot.efi patching with OpenRuntime, the replacement for AptioMemoryFix.efi

# MmioWhitelist

This section is allowing spaces to be passthrough to macOS that are generally ignored, useful when paired with DevirtualiseMmio

# Quirks

Settings relating to boot.efi patching and firmware fixes, for us, we leave it as default

# DeviceProperties

Sets device properties from a map.

This section is set up via WhateverGreen’s Framebuffer Patching Guide

(opens new window) and is used for setting important iGPU properties.

AAPL,ig-platform-id is what macOS uses to determine how the iGPU drivers interact with our system, and the two values choose between are as follows:

AAPL,ig-platform-id	Comment
0300220D	Used when the Desktop Haswell iGPU is used to drive a display
04001204	Used when the Desktop Haswell iGPU is only used for computing tasks and doesn’t drive a display
07002216	Used when the Desktop Broadwell iGPU

I added another portion as well that shows a device-id fake in case you have an HD 4400 which is unsupported in macOS.

The device-id fake is set up like so:

12040000 — this is the device id for HD 4600 which does have support in macOS

We also add 3 more properties, framebuffer-patch-enable , framebuffer-stolenmem and framebuffer-fbmem . The first enables patching via WhateverGreen.kext, the second sets the min stolen memory to 19MB and third sets the framebuffer memory to 9MB. This is usually unnecessary, as this can be configured in BIOS(64MB recommended) but required when not available.

Note: Headless framebuffers(where the dGPU is the display out) do not need framebuffer-patch-enable , framebuffer-stolenmem and framebuffer-fbmem

Key	Type	Value
AAPL,ig-platform-id	Data	0300220D
framebuffer-patch-enable	Data	01000000
framebuffer-stolenmem	Data	00003001
framebuffer-fbmem	Data	00009000
device-id	Data	12040000

(This is an example for a desktop HD 4400 without a dGPU and no BIOS options for iGPU memory)

Key	Type	Value
AAPL,ig-platform-id	Data	07002216
framebuffer-patch-enable	Data	01000000
framebuffer-stolenmem	Data	00003001
framebuffer-fbmem	Data	00009000

(This is an example for a desktop Iris Pro 6200 and no BIOS options for iGPU memory)

(opens new window) .

You can delete this property outright as it’s unused for us at this time

For us, we’ll be using the boot-arg alcid=xxx instead to accomplish this. alcid will override all other layout-IDs present. More info on this is covered in the Post-Install Page

# Delete

Removes device properties from the map, for us we can ignore this

# Kernel

Here’s where we specify which kexts to load, in what specific order to load, and what architectures each kext is meant for. By default we recommend leaving what ProperTree has done, however for 32-bit CPUs please see below:

OS X Version	MinKernel	MaxKernel
10.4	8.0.0	8.99.99
10.5	9.0.0	9.99.99
10.6	10.0.0	10.99.99
10.7	11.0.0	11.99.99
10.8	12.0.0	12.99.99
10.9	13.0.0	13.99.99
10.10	14.0.0	14.99.99
10.11	15.0.0	15.99.99
10.12	16.0.0	16.99.99
10.13	17.0.0	17.99.99
10.14	18.0.0	18.99.99
10.15	19.0.0	19.99.99
11	20.0.0	20.99.99

# Emulate

Needed for spoofing unsupported CPUs like Pentiums and Celerons

Cpuid1Mask: Leave this blank
Cpuid1Data: Leave this blank

# Force

Used for loading kexts off system volume, only relevant for older operating systems where certain kexts are not present in the cache(ie. IONetworkingFamily in 10.6).

For us, we can ignore.

# Block

Blocks certain kexts from loading. Not relevant for us.

# Patch

Patches both the kernel and kexts.

# Quirks

Settings relating to the kernel, for us we’ll be enabling the following:

Quirk	Enabled	Comment
AppleCpuPmCfgLock	NO	Need if running 10.10 or older and cannot disable CFG-Lock in the BIOS
AppleXcpmCfgLock	YES	Not needed if CFG-Lock is disabled in the BIOS
DisableIoMapper	YES	Not needed if VT-D is disabled in the BIOS
LapicKernelPanic	NO	HP Machines will require this quirk
PanicNoKextDump	YES
PowerTimeoutKernelPanic	YES
XhciPortLimit	YES	Disable if running macOS 11.3+

(opens new window) We recommend users either disable this quirk and map before upgrading or map from Windows

(opens new window) . You may also install macOS 11.2.3 or older.

The reason being is that UsbInjectAll reimplements builtin macOS functionality without proper current tuning. It is much cleaner to just describe your ports in a single plist-only kext, which will not waste runtime memory and such

# Scheme

Settings related to legacy booting(ie. 10.4-10.6), for majority you can skip however for those planning to boot legacy OSes you can see below:

# Debug

Helpful for debugging OpenCore boot issues(We’ll be changing everything but DisplayDelay ):

Quirk	Enabled
AppleDebug	YES
ApplePanic	YES
DisableWatchDog	YES
Target	67

These values are based of those calculated in OpenCore debugging

# Security

Security is pretty self-explanatory, do not skip. We’ll be changing the following:

Quirk	Enabled	Comment
AllowNvramReset	YES
AllowSetDefault	YES
BlacklistAppleUpdate	YES
ScanPolicy	0
SecureBootModel	Default	Leave this as Default if running macOS Big Sur or newer. The next page goes into more detail about this setting.
Vault	Optional	This is a word, it is not optional to omit this setting. You will regret it if you don’t set it to Optional, note that it is case-sensitive

AllowNvramReset: YES

Allows for NVRAM reset both in the boot picker and when pressing Cmd+Opt+P+R

AllowSetDefault: YES

Allow CTRL+Enter and CTRL+Index to set default boot device in the picker

ApECID: 0

Used for netting personalized secure-boot identifiers, currently this quirk is unreliable due to a bug in the macOS installer so we highly encourage you to leave this as default.

AuthRestart: NO

Enables Authenticated restart for FileVault 2 so password is not required on reboot. Can be considered a security risk so optional

BlacklistAppleUpdate: YES

Used for blocking firmware updates, used as extra level of protection as macOS Big Sur no longer uses run-efi-updater variable

DmgLoading: Signed

Ensures only signed DMGs load

ExposeSensitiveData: 6

Shows more debug information, requires debug version of OpenCore

Vault: Optional

We won’t be dealing vaulting so we can ignore, you won’t boot with this set to Secure
This is a word, it is not optional to omit this setting. You will regret it if you don’t set it to Optional , note that it is case-sensitive

ScanPolicy: 0

(opens new window) section for further details. Will not boot USB devices with this set to default

SecureBootModel: Disabled

(opens new window) section for further details.

Note: Users may find upgrading OpenCore on an already installed system can result in early boot failures. To resolve this, see here: Stuck on OCB: LoadImage failed — Security Violation

# Tools

Used for running OC debugging tools like the shell, ProperTree’s snapshot function will add these for you.

# Entries

Used for specifying irregular boot paths that can’t be found naturally with OpenCore.

Won’t be covered here, see 8.6 of Configuration.pdf

# NVRAM

Used for OpenCore’s UI scaling, default will work for us. See in-depth section for more info

Booter Path, mainly used for UI Scaling

UIScale:

01 : Standard resolution
02 : HiDPI (generally required for FileVault to function correctly on smaller displays)

DefaultBackgroundColor: Background color used by boot.efi

00000000 : Syrah Black
BFBFBF00 : Light Gray

OpenCore’s NVRAM GUID, mainly relevant for RTCMemoryFixup users

System Integrity Protection bitmask

General Purpose boot-args:

boot-args	Description
-v	This enables verbose mode, which shows all the behind-the-scenes text that scrolls by as you’re booting instead of the Apple logo and progress bar. It’s invaluable to any Hackintosher, as it gives you an inside look at the boot process, and can help you identify issues, problem kexts, etc.
debug=0x100	This disables macOS’s watchdog which helps prevents a reboot on a kernel panic. That way you can hopefully glean some useful info and follow the breadcrumbs to get past the issues.
keepsyms=1	This is a companion setting to debug=0x100 that tells the OS to also print the symbols on a kernel panic. That can give some more helpful insight as to what’s causing the panic itself.
alcid=1	Used for setting layout-id for AppleALC, see supported codecs (opens new window) to figure out which layout to use for your specific system. More info on this is covered in the Post-Install Page (opens new window)

GPU-Specific boot-args:

boot-args	Description
agdpmod=pikera	Used for disabling board ID checks on Navi GPUs (RX 5000 & 6000 series), without this you’ll get a black screen. Don’t use if you don’t have Navi (ie. Polaris and Vega cards shouldn’t use this)
nvda_drv_vrl=1	Used for enabling Nvidia’s Web Drivers on Maxwell and Pascal cards in Sierra and High Sierra
-wegnoegpu	Used for disabling all other GPUs than the integrated Intel iGPU, useful for those wanting to run newer versions of macOS where their dGPU isn’t supported

csr-active-config: 00000000

Settings for ‘System Integrity Protection’ (SIP). It is generally recommended to change this with csrutil via the recovery partition.
csr-active-config by default is set to 00000000 which enables System Integrity Protection. You can choose a number of different values but overall we recommend keeping this enabled for best security practices. More info can be found in our troubleshooting page: Disabling SIP

run-efi-updater: No

This is used to prevent Apple’s firmware update packages from installing and breaking boot order; this is important as these firmware updates (meant for Macs) will not work.

prev-lang:kbd: <>

Needed for non-latin keyboards in the format of lang-COUNTRY:keyboard , recommended to keep blank though you can specify it(Default in Sample config is Russian):
American: en-US:0 ( 656e2d55533a30 in HEX)
Full list can be found in AppleKeyboardLayouts.txt

(opens new window)

Hint: prev-lang:kbd can be changed into a String so you can input en-US:0 directly instead of converting to HEX

Key	Type	Value
prev-lang:kbd	String	en-US:0

# Delete

Forcibly rewrites NVRAM variables, do note that Add will not overwrite values already present in NVRAM so values like boot-args should be left alone. For us, we’ll be changing the following:

Quirk	Enabled
WriteFlash	YES

LegacyEnable: NO

Allows for NVRAM to be stored on nvram.plist, needed for systems without native NVRAM

LegacyOverwrite: NO

Permits overwriting firmware variables from nvram.plist, only needed for systems without native NVRAM

LegacySchema

Used for assigning NVRAM variables, used with LegacyEnable set to YES

WriteFlash: YES

Enables writing to flash memory for all added variables.

# PlatformInfo

For setting up the SMBIOS info, we’ll use CorpNewt’s GenSMBIOS

For this Haswell example, we chose the iMac15,1 SMBIOS. The typical breakdown is as follows:

SMBIOS	Hardware
iMac14,4	Haswell with only iGPU
iMac15,1	Haswell with dGPU
iMac16,2	Broadwell

Note: The following SMBIOS are only supported up-to macOS 11, Big Sur. For cases where you must boot Monterey, see below:

Monterey SMBIOS table

Note choosing a SMBIOS from the list below for Big Sur or older is not recommended, as Power Management and such can break when using unoptimized SMBIOS.

SMBIOS	Hardware
iMac16,2	Broadwell with only iGPU
iMac17,1	Broadwell with dGPU

Run GenSMBIOS, pick option 1 for downloading MacSerial and Option 3 for selecting out SMBIOS. This will give us an output similar to the following:

The Type part gets copied to Generic -> SystemProductName.

The Serial part gets copied to Generic -> SystemSerialNumber.

The Board Serial part gets copied to Generic -> MLB.

The SmUUID part gets copied to Generic -> SystemUUID.

We set Generic -> ROM to either an Apple ROM (dumped from a real Mac), your NIC MAC address, or any random MAC address (could be just 6 random bytes, for this guide we’ll use 11223300 0000 . After install follow the Fixing iServices

(opens new window) page on how to find your real MAC Address)

Reminder that you want either an invalid serial or valid serial numbers but those not in use, you want to get a message back like: «Invalid Serial» or «Purchase Date not Validated»

Automatic: YES

Generates PlatformInfo based on Generic section instead of DataHub, NVRAM, and SMBIOS sections

# Generic

AdviseFeatures: NO

Used for when the EFI partition isn’t first on the Windows drive

MaxBIOSVersion: NO

Sets BIOS version to Max to avoid firmware updates in Big Sur+, mainly applicable for genuine Macs.

ProcessorType: 0

SpoofVendor: YES

Swaps vendor field for Acidanthera, generally not safe to use Apple as a vendor in most case

SystemMemoryStatus: Auto

Sets whether memory is soldered or not in SMBIOS info, purely cosmetic and so we recommend Auto

UpdateDataHub: YES

Update Data Hub fields

UpdateNVRAM: YES

UpdateSMBIOS: YES

UpdateSMBIOSMode: Create

Replace the tables with newly allocated EfiReservedMemoryType, use Custom on Dell laptops requiring CustomSMBIOSGuid quirk
Setting to Custom with CustomSMBIOSGuid quirk enabled can also disable SMBIOS injection into «non-Apple» OSes however we do not endorse this method as it breaks Bootcamp compatibility. Use at your own risk

ConnectDrivers: YES

Forces .efi drivers, change to NO will automatically connect added UEFI drivers. This can make booting slightly faster, but not all drivers connect themselves. E.g. certain file system drivers may not load.

# Drivers

Add your .efi drivers here.

Only drivers present here should be:

By default, OpenCore only loads APFS drivers from macOS Big Sur and newer. If you are booting macOS Catalina or earlier, you may need to set a new minimum version/date. Not setting this can result in OpenCore not finding your macOS partition!

macOS Sierra and earlier use HFS instead of APFS. You can skip this section if booting older versions of macOS.

Both MinVersion and MinDate need to be set if changing the minimum version.

macOS Version	Min Version	Min Date
High Sierra ( 10.13.6 )	748077008000000	20180621
Mojave ( 10.14.6 )	945275007000000	20190820
Catalina ( 10.15.4 )	1412101001000000	20200306
No restriction	-1	-1

# Audio

Related to AudioDxe settings, for us we’ll be ignoring(leave as default). This is unrelated to audio support in macOS.

# Input

Related to boot.efi keyboard passthrough used for FileVault and Hotkey support, leave everything here as default as we have no use for these quirks. See here for more details: Security and FileVault

# Output

Relating to OpenCore’s visual output, leave everything here as default as we have no use for these quirks.

# ProtocolOverrides

Mainly relevant for Virtual machines, legacy macs and FileVault users. See here for more details: Security and FileVault

# Quirks

Relating to quirks with the UEFI environment, for us we’ll be changing the following:

Quirk	Enabled	Comment
IgnoreInvalidFlexRatio	YES
UnblockFsConnect	NO	Needed mainly by HP motherboards

IgnoreInvalidFlexRatio: YES

Fix for when MSR_FLEX_RATIO (0x194) can’t be disabled in the BIOS, required for all pre-Skylake based systems

DisableSecurityPolicy: NO

Disables platform security policy in firmware, recommended for buggy firmwares where disabling Secure Boot does not allow 3rd party firmware drivers to load.
If running a Microsoft Surface device, recommended to enable this option

RequestBootVarRouting: YES

Redirects AptioMemoryFix from EFI_GLOBAL_VARIABLE_GUID to OC_VENDOR_VARIABLE_GUID . Needed for when firmware tries to delete boot entries and is recommended to be enabled on all systems for correct update installation, Startup Disk control panel functioning, etc.

UnblockFsConnect: NO

Some firmware block partition handles by opening them in By Driver mode, which results in File System protocols being unable to install. Mainly relevant for HP systems when no drives are listed

# ReservedMemory

Used for exempting certain memory regions from OSes to use, mainly relevant for Sandy Bridge iGPUs or systems with faulty memory. Use of this quirk is not covered in this guide

# Cleaning up

And now you’re ready to save and place it into your EFI under EFI/OC.

For those having booting issues, please make sure to read the Troubleshooting section first and if your questions are still unanswered we have plenty of resources at your disposal:

# Intel BIOS settings

Note: Most of these options may not be present in your firmware, we recommend matching up as closely as possible but don’t be too concerned if many of these options are not available in your BIOS

# Disable

Fast Boot
Secure Boot
Serial/COM Port
Parallel Port
VT-d (can be enabled if you set DisableIoMapper to YES)
CSM
Thunderbolt(For initial install, as Thunderbolt can cause issues if not setup correctly)
Intel SGX
Intel Platform Trust
CFG Lock (MSR 0xE2 write protection)(This must be off, if you can’t find the option then enable AppleXcpmCfgLock under Kernel -> Quirks. Your hack will not boot with CFG-Lock enabled)
- For 10.10 and older, you’ll need to enable AppleCpuPmCfgLock as well

# Enable

VT-x
Above 4G decoding
Hyper-Threading
Execute Disable Bit
EHCI/XHCI Hand-off
OS type: Windows 8.1/10 UEFI Mode
DVMT Pre-Allocated(iGPU Memory): 64MB
SATA Mode: AHCI

# Once done here, we need to edit a couple extra values. Head to the Apple Secure Boot Page

Источник

Читайте также: Айфон 11 pro space grey

Версия	Ссылка	Загрузок	Размер	Дата
Все версии	Скачать	300 000	2.3 МБ	09 декабря 2021
Для 1.12.2	Скачать	1	0.1 Мб	31 мая 2020
Для 1.12.1	Скачать	0	0.1 Мб	20 января 2018
Для 1.12	Скачать	0	0.1 Мб	20 января 2018
Для 1.11.2	Скачать	0	0.1 Мб	18 июня 2019
Для 1.10.2	Скачать	0	0.1 Мб	13 июня 2018
Для 1.10	Скачать	0	0.1 Мб	21 августа 2016
Для 1.9.4	Скачать	0	0.1 Мб	06 марта 2018
Для 1.8.9	Скачать	0	0.1 Мб	06 марта 2018
Для 1.7.10	Скачать	0	0.1 Мб	06 марта 2018

Apple core mod что это

AppleCore [1.12.2] [1.12.1] [1.12] [1.10] [1.7.10]

Описание

Скриншоты

Видео

Как установить AppleCore

Скачать AppleCore