Question: Q: cmd + r gives me error -1007f
If i start my mac and go into recovery mode it gives me this error.
Posted on Feb 25, 2018 9:31 AM
Most likely, the recovery partition on your MBA is either missing or corrupted.
Have you tried doing an Internet Recovery?
Posted on Feb 25, 2018 10:11 AM
All replies
Loading page content
Page content loaded
Most likely, the recovery partition on your MBA is either missing or corrupted.
Have you tried doing an Internet Recovery?
Feb 25, 2018 10:11 AM
Yes. That’s how I got to this screen.
Mar 15, 2018 4:09 PM
Internet Recovery Mode will require that your Mac has either a wired or wireless connection to the Internet. What exact model is your MacBook Air and what version of macOS is it running?
Mar 16, 2018 3:17 PM
Internet Recovery Mode will require that your Mac has either a wired or wireless connection to the Internet. What exact model is your MacBook Air and what version of macOS is it running?
Of course. I’ve also had command-R at power-on default to Internet Recovery when there was no recovery partition available, which sounds like what the OP is seeing.
For the OP — the internet connection must be direct. It can include a WiFi password (you’ll get a chance to select a WiFi SSID and enter a WEP/WPA/WPA2 password) but it won’t work if it requires some sort of «splash screen». An example of something that won’t work would be WiFi at a cafe where you need to go to a terms of use page from the first attempt to pull up a web page. Or a hotel where you need to enter your room number and name through a web browser before you get internet access.
One of the better places is at an Apple Store. In my experience they’ve always connected directly and the speed is lightning fast.
Источник
Question: Q: Erased MacBook drive and now -1007F error?
I’m selling my MacBook, I restarted to Disk Utility and erased the drive and was going to reinstall MacOS but now I just getting a spinning globe on a grey screen that ends with the apple.com/support url and «-1007F» after it. Help?
MacBook Air, OS X Yosemite (10.10)
Posted on May 16, 2017 2:07 PM
I would assume, then, that it is not finding an active Wi-Fi connection. Try the following:
- Restart the computer.
- At the chime press and hold down the COMMAND-OPTION-P-R keys, simultaneously. When you hear the chime again keep holding down the same keys until you hear the chime twice more.
- Release the keys.
- If the computer does not default to the Internet Recovery mode, then restart the computer holding down the COMMAND-OPTION-R keys.
Do you have access to another computer from which you could try creating a bootable USB flash drive? How far away is the closest Apple shop?
Posted on May 17, 2017 1:34 PM
Helpful answers
Your model does not support Netinstall. You must start by installing either the version of OS X that came with the installer DVDs when the computer was purchased or the last version of Snow Leopard that would run on your computer. I have no idea which you can or should use because you did not provide information on the exact model you have. You refer to it as a MacBook, but your profile shows MacBook Air. We need to know exactly what model you have: To find the model identifier open System Profiler in the Utilities’ folder. It’s displayed in the panel on the right.
May 16, 2017 2:25 PM
There’s more to the conversation
Loading page content
Page content loaded
Your model does not support Netinstall. You must start by installing either the version of OS X that came with the installer DVDs when the computer was purchased or the last version of Snow Leopard that would run on your computer. I have no idea which you can or should use because you did not provide information on the exact model you have. You refer to it as a MacBook, but your profile shows MacBook Air. We need to know exactly what model you have: To find the model identifier open System Profiler in the Utilities’ folder. It’s displayed in the panel on the right.
May 16, 2017 2:25 PM
I’m sorry, it is a 2011 MacBook Air without a DVD drive. Regarding Profiler, I cannot open anything at this point because the drive is erased. I thought for sure after erasing the drive it would install over wifi or something.
May 16, 2017 2:25 PM
Did the computer come with a set of DVDs? If not then it can be restored over the Internet.
Install Lion Through Yosemite on a New HDD/SDD
- Restart the computer and after the chime press and hold down the Command-Option-R keys until a globe appears. Wait patiently — 5-15 minutes — until the Utility Menu appears.
- Select Disk Utility from the Utility Menu and click on the Continue button.
- After Disk Utility loads select the drive (usually, this is the out-dented entry with the mfgr.’s ID and size) from the side list. Click on the Erase tab in Disk Utility’s main window. A drop-down panel will appear.
- Set the partition scheme to GUID then click. Set the Format type to Mac OS Extended (Journaled.) Click on the OK button and wait for the process to finish. Quit Disk Utility and return to the Utility Menu.
- Select Install OS X from the Utility Menu and click on the Continue button.
Источник
1008F — или как раскирпичить свой Mac
Всем привет! В этом посте речь пойдет о бесконечном режиме восстановления macOS, ошибках 1008F, 2003F, 2004F и о том как их побороть.
Подобные ошибки можно встретить при попытке выполнить Internet Recovery своего Mac, а причин побуждающих к этому действию — множество. В моем случае, дело было так..
Предыстория
Одним осенним прохладным днем, пришло мне обновление Xcode 12.2 , а вместе с ним и macOS Big Sur. После обновления Xcode, он стал жутко тормозить, зависать, вылетать и терять последние изменения. Через несколько попыток переустановки Xcode, было принято решение обновиться до Big Sur. В принципе, проблему это не решило, зато багов докинуло. Затем, начался процесс переустановки macOS Big Sur с загрузочной флешки и из проблем осталось только отсутствие поддержки симуляторов iOS
4. Выбрать проблемный MacBook и нажать «удалить из Найти айфон«;
6. Покинуть программу:
7. (Опционально) Удалить проблемный Mac из учетной записи Apple (Из списка устройств).
После этого можно попробовать восстановиться еще раз. К сожалению, данный способ мне не помог.
Я позвонил в службу поддержки Apple, где мне сообщили о том, что в моем случае 1008F возникает исключительно из-за плохого интернета (на самом деле из-за плохого интернета возникают ошибки 200+F). Также, мне посоветовали обратиться в авторизованный сервис (что логично) т.к. там и специалисты граммотные, и интернет хороший. Тут стоить отметить, что претензий к поддержке Apple я не имею. Было опробовано несколько Wi-Fi сетей в т.ч. и с мобильных устройств. Итог один — не помогло.
Путь сложный:
Далее возникла идея: поскольку жесткий диск несъёмный, слишком дорого было бы для Apple решать такие вопросы заменой материнских плат. Должна была быть какая-то лазейка, типа DFU режима, который был очень популярен на айфонах 3gs и 3g. Легкий гуглинг навел меня на несколько интересных статей: тут и тут. Дублировать содержимое статей смысла не вижу, в целом, они о том как вводить Mac в DFU режим и как с ним работать.
1. Нам нужен еще один Mac (к счастью такой нашелся);
2. Соединяем наш Mac (клиент) со вторым Mac (сервер) кабелем питания UCB-C — UCB-C (руководство по ссылкам выше);
3. Скачиваем на Mac (сервер) утилиту Apple Configurator 2 и запускаем ее;
4. Вводим Mac (клиент) в DFU;
5. В утилите Apple Configurator 2: Правая кнопка мыши > Actions > Advanced > Revive Device:
6. После того как все loading — индикаторы прокрутятся:
а на Mac (клиент) произойдет вот это:
нужно попробовать запустить процедуру восстановления через Shift-Option-Command-R.
7. Если вы по прежнему получаете 1008F (не 2003F, 2004F — о них позже), переходите к п8.
8. Требуется повторить действия с п.1 по п.4. После чего выбрать Apple Configurator 2 пункт Restore.
9. У вас надеюсь все будет хорошо, а вот я получил сообщение об ошибке:
что-то типа такого, только код был другой.
10. Далее я вывел Mac (клиент) из DFU режима и загрузил его через Shift-Option-Command-R.
11. Начался заветный процесс восстановления, который периодически падал в ошибки 2003F и 2004F.
2003F, 2004F
2003F, 2004F — это ошибки связанные с нестабильным, медленным интернет соединением. Поговаривают, что есть и другие 200+F ошибки, но их я на своем пути не встретил.
Тут стоить отметить, что интернет-провайдер у меня полное расстройство, поэтому решение было следующим:
На роутере я прописал DNS: основной сервер 8.8.8.8, альтернативный 8.8.4.4;
Сделал WI-FI сеть без пароля, но с фильтрацией по MAC — адресам, поскольку наткнулся на информацию о том, что Mac в процессе Internet Recovery может забывать пароль от WI-FI;
Также могут помочь сброс NVRAM или PRAM;
Запускать Mac через Shift-Option-Command-R, можно даже после того, как вы получили ошибку 200+F. Бывают случаи, когда загрузка происходит не с первого раза;
В моем случае, я дождался 6 утра, пока основные пользователи моего провайдера спят, а в Купертино — ночь, значит нагрузка на сервера Apple значительно меньше. Загрузил Mac через Shift-Option-Command-R и случилось чудо.
Дальше у меня загрузился Recovery macOS Mojave, т.к. именно с ней поставлялся MacBook. В дисковой утилите жесткий диск определялся как неизвестное устройство, после форматирования его со схемой разделов GUID, установка macOS продолжается в обычном режиме.
Заключение
На всю эту историю у меня ушло в сумме около трех дней, поэтому если этот пост сэкономит кому-нибудь хоть каплю времени и нервов — будет отлично. Тем не менее, прошу обратить внимание: описанное выше происходило со мной, у вас может быть иначе. Все действия вы выполняете на свой страх и риск. От себя — я бы рекомендовал перед переустановкой macOS включать загрузку с USB — носителей, отвязывать Mac от учетки и выполнять установку с флешки. Жалею ли я о том, что не сделал так сам? — Нет 🙂
Желаю вам легких апдейтов, даунгрейдов и вообще поменьше багов и лагов.
По результатам опроса, написал о том как откатиться с macOS Big Sur до macOS Catalina. Прочитать об этом можно тут. Спасибо за проявленный интерес!
Источник
Question: Q: Internet Recovery Error 1007f.
Hi I have a 13″ macbook pro mid 2012 non retina with 4gb of ram. I had partitioned the macintosh had with boot camp. I had give 100gb to windows but when uninstalling with bootcamp it crashed. The bootcamp partiton was gone but my macintosh hd was only 400gb (not 500). I tryed making the partition 500gb but it said error system verification failed. I verifyed the disk in disk utility and it said to restart holding command R and boot with disk utility. I did. The internet recovery came up, i chose my home network and entered the password (WPA2 configuration). Once that was done it said ERROR apple.com/support — 1007f. I would like to know how to get my 100gb back (and only one partition). Please Help.
MacBook Pro, OS X Mountain Lion (10.8.4)
Posted on Jul 7, 2013 12:54 AM
I take it that Recovery Mode never came up cause Internet access was not working quite right. Here’s a workaround.
First, BACK THE MAC PARTITION UP. Best bet is a bootable clone onto an external drive. So, no matter what happens you will have something to fall back on.
Now, download Recovery Disk Assistant, get a 4GB USB flash stick and construct a bootable Recovery HD. See here (http://support.apple.com/kb/HT4848) and here (http://support.apple.com/kb/DL1433).
Leave your new creation on the USB port, restart the Mac and hold down the Option key prior to the chime. A list of bootable volumes will appear, click on the USB Recovery HD you just made and the green arrow to boot from it. Go past the languages screen and choose Disk Utility (bottom option).Click on the Device and the Partition tab. Now you’ll be able to modify the partitions on the Mac’s storage device since you did not boot from it.
There should be an empty space at the bottom, corresponding to the BootCamp partition that was deleted. The OS X partition above will have a little hash mark on its bottom-right corner. Click and drag it down to cover the empty space. Then click on Apply to resize that partition and reclaim your lost 100GB.
May want to go to First Aid and do a Repair Disk on both device and volume, for good measure. Do a Repair Disk Permissions on the volume too, while you’re at it.
Quit, quit and restart normally. Done. Keep the USB Recovery HD thumbdrive for the next rainy day.
Источник
Question: Q: Internet Recovery Error 1007f.
Hi I have a 13″ macbook pro mid 2012 non retina with 4gb of ram. I had partitioned the macintosh had with boot camp. I had give 100gb to windows but when uninstalling with bootcamp it crashed. The bootcamp partiton was gone but my macintosh hd was only 400gb (not 500). I tryed making the partition 500gb but it said error system verification failed. I verifyed the disk in disk utility and it said to restart holding command R and boot with disk utility. I did. The internet recovery came up, i chose my home network and entered the password (WPA2 configuration). Once that was done it said ERROR apple.com/support — 1007f. I would like to know how to get my 100gb back (and only one partition). Please Help.
MacBook Pro, OS X Mountain Lion (10.8.4)
Posted on Jul 7, 2013 12:54 AM
I take it that Recovery Mode never came up cause Internet access was not working quite right. Here’s a workaround.
First, BACK THE MAC PARTITION UP. Best bet is a bootable clone onto an external drive. So, no matter what happens you will have something to fall back on.
Now, download Recovery Disk Assistant, get a 4GB USB flash stick and construct a bootable Recovery HD. See here (http://support.apple.com/kb/HT4848) and here (http://support.apple.com/kb/DL1433).
Leave your new creation on the USB port, restart the Mac and hold down the Option key prior to the chime. A list of bootable volumes will appear, click on the USB Recovery HD you just made and the green arrow to boot from it. Go past the languages screen and choose Disk Utility (bottom option).Click on the Device and the Partition tab. Now you’ll be able to modify the partitions on the Mac’s storage device since you did not boot from it.
There should be an empty space at the bottom, corresponding to the BootCamp partition that was deleted. The OS X partition above will have a little hash mark on its bottom-right corner. Click and drag it down to cover the empty space. Then click on Apply to resize that partition and reclaim your lost 100GB.
May want to go to First Aid and do a Repair Disk on both device and volume, for good measure. Do a Repair Disk Permissions on the volume too, while you’re at it.
Quit, quit and restart normally. Done. Keep the USB Recovery HD thumbdrive for the next rainy day.
Источник