Bluetooth apple драйвер windows

Question: Q: Where can I find Windows 10 Bluetooth drivers for my mid-2011 Macbook Pro?

I have installed the Windows 10 Technical Preview on my mid-2011 MacBook Pro 13-inch. I had been running Windows 7 with no problems. The installation had been done using Apple’s BootCamp software. The problem is that, in Windows 10 Device Manager, my Bluetooth USB Host Controller (found in «Other Devices») shows that no drivers are installed. Worse yet, when I click on Properties for the device, I get:

The drivers for this device are not installed. (Code 28)

There are no compatible drivers for this device.

To find a driver for this device, click Update Driver.

And, of course, no bluetooth radios show up in the Device Manager. Note that all of this was working perfectly in Windows 7.

Does anyone have any ideas?

MacBook Pro, OS X Yosemite (10.10.2), Windows 10 Technical Preview

Posted on Feb 3, 2015 5:50 AM

Also, on the OSX side look in About This Mac -> More Info -> System Report -> Bluetooth and post the hardware information so non-Apple drivers can also be located/tested.

Posted on Feb 3, 2015 5:56 AM

Helpful answers

2) Extract the AppleBluetoothBroadcomInstaller64.exe with 7zip or anything else

3) Go to Device manager find the bluetooth device problem :

4) Update Driver Software > Browser my computer for driver software > let me pick from a list of device drivers on my computer > Have Disk > Browse the extracted folder > OK > Next > Close

5) Its should worked again.

Aug 9, 2015 2:54 AM

1.) Launch Boot Camp Assistant
2.) Choose «Download the latest Windows support software from Apple» (FAT formatted external USB drive needed)
3.) Boot into Windows 10
4.) Open «BootCamp» folder on your USB drive and double click «setup.exe»

This worked on a 15″ Retina MacBook Pro mid 2014 running Windows 10 Pro.

Jul 29, 2015 2:01 PM

So this may be a little risky, but. there’s a freeware app called Bluetooth Driver Installer. I just ran 1.0.1.98 Beta 64-bit on Windows 10 Professional 10240 (presumably RTM). Assuming this app is safe (I crossed my fingers), it does create a restore point before it starts installing, so if it screws anything up, you should be able to roll back. The first time I ran it, it failed because it couldn’t write to C:\Windows\inf\bth.inf. Here’s a workaround.

Browse to the file, right click, click Properties. On the ‘Security’ tab, click ‘Advanced’. ‘Owner’ should show ‘TrustedInstaller’. Change it to your username. Hit OK, OK, OK, etc. a few times to get out of the properties dialog. Then pull up the properties on it again, go back to the ‘Security’ tab. Hit ‘Edit’ and add ‘Everyone’ — Full Control. Now the installer works. In Device Manager, it shows up under the Bluetooth sub-tree as ‘Microsoft Bluetooth Enumerator’, ‘Microsoft Bluetooth LE Enumerator’, and ‘My new generic Bluetooth adapter’.

Afterwards, I recommend putting all the bth.inf permissions back to the way they were. Edit the permissions again and remove the ‘Everyone’ permission you created. Then click ‘Advanced’. Click ‘Change’ next to the Owner. You have to type in ‘NT Service\TrustedInstaller’ (this won’t show up in search results, so just type/copy+paste it w/o the »s). Hit OK a bunch of times and you’re all set.

I just did this a few minutes ago so I don’t know whether Windows 10 will undo the modifications one day. Also sfc /scannow may not like it.

Источник

Как обновить драйверы iPhone на ПК с Windows

Ваш компьютер с Windows не видит iPhone? Возможно, вам нужно скопировать фото со смартфона на компьютер или синхронизовать данные через iTunes. Если Windows не видит ваш iPhone или iPad при подключении через USB-кабель, возможно, нужно обновить драйверы.

Стоит отметить, что Windows может не распознавать iPhone по разным причинам. Если на компьютере появляется сообщение с ошибкой «OxE», проверьте, чтобы iPhone был включен и разблокирован. Возможно, на iPhone нужно начать доверять компьютеру. Иногда помогает отключение и повторное подключение устройства с помощью кабеля. В редких случаях проблема исчезает, если отключить от компьютера все остальные USB-аксессуары.

Если же вы испробовали всё, и ничего не помогло, попробуйте обновить драйверы. Ниже мы расскажем аж о трёх способах обновить драйверы iPhone на ПК с Windows. Для iPad и iPod touch инструкция тоже актуальна.

Как обновить драйверы iPhone через Microsoft Store

Сейчас есть два способа установить iTunes на свой компьютер. Программу можно скачать с сайта Apple или же из Microsoft Store. Если вы скачали программу из Microsoft Store, убедитесь в том, что у вас установлена последняя доступная версия. После этого следуйте шагам ниже.

1. Отключите свой iPhone от компьютера, подключите его снова и проверьте, чтобы он был разблокирован. Правой кнопкой мыши нажмите на значок «Пуск» и выберите «Диспетчер устройств». Если так не получается, то введите «Диспетчер устройств» в поиске меню Пуск.

1. Выберите пункт «Другие устройства», а затем нажмите на «iPhone» правой кнопкой мыши. Нажмите «Обновить драйвер».

1. Откроется новое окно. Выберите «Автоматический поиск драйверов».

1. Когда драйверы будут установлены, проверьте, доступны ли другие обновления для вашего компьютера. Для этого зайдите в «Центр обновления Windows».
2. Здесь нажмите «Проверить наличие обновлений», чтобы проверить установлена ли у вас последняя доступная версия системы.

Когда закончите, запустите iTunes и проверьте, находит ли программа ваш iPhone.

Как обновить драйверы iPhone через сайт Apple

Если вы скачивали программу с сайта Apple, процесс будет другой.

1. Отключите свой iPhone от компьютера, подключите его снова и проверьте, чтобы он был разблокирован. Зажмите клавиши «Windows + R», чтобы открыть окно «Выполнить». В окне введите следующую команду и нажмите

1. Откроется новое окно. Правой кнопкой мыши нажмите на «usbaaplinf» или «usbaapl.inf» и выберите «Установить», чтобы переустановить драйверы. После этого откройте iTunes, чтобы проверить подключение iPhone.

Такими способами вы можете обновить драйверы iPhone на ПК с Windows. Есть и третий способ – обновить драйвер Apple Mobile Device.

Как обновить драйвер Apple Mobile Device USB

Это ваш последний вариант, если первые два не сработали. Подключите iPhone к компьютеру и следуйте шагам ниже.

1. Откройте окно «Выполнить», зажав «Windows + R». Введите в окно «devmgmt.msc» и нажмите OK.
2. Выберите пункт «Контроллеры USB». Правой кнопкой мыши нажмите на «Apple Mobile Device USB Driver» и выберите «Обновить драйверы».

Это всё, при наличии обновлений драйверы будут обновлены. Если у вас не отображается драйвер Apple Mobile Device, возможно, проблема в вашем USB-кабеле. Попробуйте использовать другой.

Также попробуйте использовать другой USB-порт на компьютере. Если не поможет и это, нужно обращаться к специалисту. Тем не менее, в большинстве случаев проблему решают описанные выше способы.

Источник

Question: Q: iphone bluetooth driver for windows 7

I am not able to connect iphone 4s to windows 7 32 bit OS via bluetooth

iPhone 4S, iOS 5.1.1

Posted on Jun 15, 2012 8:22 AM

All replies

Loading page content

Page content loaded

No. You can’t. That’s not a feature of the iPhone.

The only thing for which you can use bluetooth with a PC is tethering the phone’s 3G Internet connection.

Jun 15, 2012 8:33 AM

That is correct.

This has never been a feature of iphone.

Jun 15, 2012 8:33 AM

I was just able to setup a bluetooth connection between my iPhone 4s and my Windows 7 PC and I’m streaming music through much better speakers. It was all plug-and-play to download the audio driver. Just «Add a Bluetooth Device» in the hardware section of Control Panel while viewing bluetooth devices on your iPhone (so that it is discoverable). I’m not sure why people are saying that you can’t when it is so easy.

Jun 20, 2012 11:06 AM

Because you can’t. What you have apparently set up is a driver that allows you to use A2DP audio streaming. That’s a different animal.

Jun 20, 2012 11:31 AM

A2DP is streamed over a Bluetooth connection. This is just what I wanted to do when finding this discussion and I’m glad that I didn’t give up based on the comments here!

Puli asked if he could connect to his Windows 7 PC using Bluetooth. Are you making some assumption that I am missing about specific protocols and services?

I can say that «yes» you certainly can connect via Bluetooth to a Windows 7 PC (that was the question) at the very least to stream audio, because I’ve done it.

With only 3 days of iPhone experince, I can assure readers that this earlier statement is not true:

» The only thing for which you can use bluetooth with a PC is tethering the phone’s 3G Internet connection. «

Jun 20, 2012 5:09 PM

Hi, I am trying this but the drivers fail to load or can not be found and the pairing is then unsuccessful. Any tips please?

I was just able to setup a bluetooth connection between my iPhone 4s and my Windows 7 PC and I’m streaming music through much better speakers. It was all plug-and-play to download the audio driver. Just «Add a Bluetooth Device» in the hardware section of Control Panel while viewing bluetooth devices on your iPhone (so that it is discoverable). I’m not sure why people are saying that you can’t when it is so easy.

Sep 5, 2012 1:54 AM

I know this thread is 5 months old, but where did you find the «add a bluetooth device» tab in the hardware section of the control panel?

Nov 21, 2012 3:32 PM

I have an iPhone 3GS and I can use bluetooth to tether my internet to my windows7 laptop.

I have a bluetooth icon on my taskbar, right click will open a menu. Click on add a device, once you’ve paired your iphone you can connecto to it.

Select the device and connect using access point that will share the iphone’s internet to the laptop.

I hope it helps!

Nov 28, 2012 4:19 PM

I have a Windows 7 laptop and an IPhone 3gs. When I pair it the phone says Not Connected but the Laptop says it is. It updates my calendar from Laptop to Iphone. However when I’m on the road the Bluetooth connection in my Toyota keeps dropping out and instantly reconnecting — anoying! Before I connected to my laptop all was fine now even if I disconnect the Iphone from the Laptop it still drops out on the road.

The Iphone is saying «No connected» now even though the laptop and the phone are both side by side.

I think the problem is the lack of a driver which on pairing the Laptop couldn’t find even though the connection is working.

Dec 5, 2012 11:55 PM

it’s working for me 🙂

Ou install this software and update drivers: http://www.drivermagician.com/

Oct 14, 2014 8:15 AM

this finally fixed my problem! I have been trying to connect by iPhone to my Windows 7 PC forever. Thank you so much!

Nov 2, 2014 6:25 PM

I have installed the Broadcom driver that Edbrows points to, and it will indeed play music. But that’s it.

I’m a Mac person through and through, but I find this lack of Bluetooth support between the most ubiquitous phone and the most ubiquitous operating system totally unacceptable. Really, Apple? We’re still playing these games? I need to transfer a photo from my phone to my work computer, and I left the cable at home. So I’m out of luck today. Wow. Craptacular.

Mar 9, 2015 7:50 AM

I need to transfer a photo from my phone to my work computer, and I left the cable at home. So I’m out of luck today. Wow. Craptacular.

Sure is. Because of course you can’t email the photo to yourself, and download the photo from your email onto your work computer.

iOS Bluetooth has never been advertised or designed for file transfer from an iOS device to a computer. So, expecting a feature that the company never said was available is ridiculous. and getting upset about it is even more ridiculous.

My iPhone can’t be used as microwave to heat my food! Gosh durn it Apple.

Mar 9, 2015 8:17 AM

My iPhone can’t be used as microwave to heat my food! Gosh durn it Apple.

I find that comment/attitude absurd. People expect un-stated features all the time. It’s called advancement/innovation. It’s got nothing to do with what the manufacturer advertised it could/couldn’t do at some point in time.

Of course, I am not talking cooking, I am talking Bluetooth transfers!

If a feature is useful/desirable and reasonable we should expect a manufacturer to implement it. If not, that manufacturer is falling behind, and we go and buy somewhere else.

I’m with Bri Guy. This is a feature my Nokia ‘feature phone’ had years ago. Lame that we are going backwards.

In the early days, Apple stuff ‘just worked’. Those days are gone, and Apple functionality looks a lot like their competitors these days (often behind even), just with a bit more gloss and shine. Whoopee.

My next phone sure ain’t an iPhone.

Mar 10, 2015 2:32 PM

Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:

Speculations or rumors about unannounced products.

Discussions of Apple policies or procedures or speculation on Apple decisions.

As you joined today you clearly omitted to read the Terms of Use you agreed when joining

Mar 10, 2015 2:38 PM

Question: Q: iphone bluetooth driver for windows 7 More Less

Источник

Question: Q: Full Bluetooth functionality in Bootcamp (audio, A2DP, FTP, OBEX)

When runing Windows 7 in a native bootcamp partition you may have experienced issues when trying to pair android devices, audio sinks, headsets, etc. For earlier Mac models (2010 and earlier) the workaround consisted in using the broadcom drivers released by Acer or HP. However, the later 2011 models including MBA mid 2011, Macbook Pro and iMac will not allow you to install those drivers. Neither will Broadcom oficial updater recognize your bluetooth built in device.

The good news: after several weeks googling and installing/uninstalling pretty much every available driver on the internet I managed to have all my bluetooth devices wroking on Windows 7 x64 (bootcamp partition) on my MBA MID 2011.

You have at least 3 options

1.- Bluesoleil Stack: Altugh the chip is not offitially supported you can get it «brut force» recognized. This is described here:

2.- Toshiba Stack: The version 8.0 works pretty good specially for Audio devices the audio quality is pretty the best you will get. Same as above you need to force the recognition of your chip

The toshiba stack (30 days trial)

3.- Thank again to Acer (and not to Apple) we can get also a fully functional profile in a hardware we have paid a lot of money for. BUT WARNING! here you SHOULD NOT install the drivers!. Install only the utility suit instead. Pay carefull attention or you will get a blue screen and you will need to uninstall the drivers in safe mode or even have to do a clean Windows install. Uninstall all your paired BT devices (except for Magic Mouse and or keyboard you can leave them paired)

a.- Download the drivers

b.- Unzip the file and explore the following folder

\Bluetooth(4.0)_Atheros_7.4.0.96_W7x64\Bluetooth_Suite_win7. Run Win764.exe or Win732 according to your OS.

Let the software install and restart.

c.- Pair your devices and enjoy.

Options 1 and 2 (Bluesoleil and Toshiba Stack) are good options however they are paid-off softwares but what could be more important for many useres is that they completely override the Microsoft bluetooth stack and therefore Apple devices (like magic mouse) will loose some functionality I wasn’t able to get the touch scrolling or the gestures working with those stacks. The 3th option however will not completeley override the Microsoft stack (used by Apple’s drivers) and therefore Apple Magic mouse will work perfectly. The Atheros bluetooth suit will only add the requiered protocols and make them interact with the Microsoft stack. The disadvantage of the latest is that the audio quality is not even close as the one you are gonna get with the Toshiba stack and not say about configurability.

I hope I will save some of you some time and many headaches.

Источник