Bluetooth iphone windows 7 bluetooth peripheral device

Скачать драйвер Периферийное устройство Bluetooth на Windows 7

При попытке подключения к ПК какого-либо устройства Bluetooth пользователь может столкнуться с системным сообщением об отсутствии или некорректной установке соответствующих драйверов. Причиной этого обычно является отсутствие в системе соответствующего драйвера от Майкрософт, из-за чего необходимое подключение не происходит корректно. В этом материале я разберу, как исправить ошибку периферийного устройства Bluetooth на Windows 7 и загрузить нужный драйвер на ваш ПК.

Драйвер периферийного устройство не найден – суть и причины проблемы

Упомянутая дисфункция имеет довольно продолжительную историю, и наблюдается у многих пользователей. Причиной её возникновения является использующийся по умолчанию драйвер блютуз, ответственный за подключение и обмен данными между устройствами. Данный драйвер может быть повреждён, устарел или некорректно установлен на ПК, вследствие чего могут возникать различного рода сбои в его функционале.

Решается данная проблема довольно просто, и ниже я приведу различные способы решения проблемы.

Способы установить Периферийное устройство Bluetooth на Виндовс 7

Рассмотрим различные варианты того, как решить проблему «не удалось найти драйвер» для периферийного устройства блютус.

Способ №1. Автоматическое обновление драйвера блютуз

Если вы не видите обнаруженных устройств Блютуз под «Другие устройства», нажмите сверху на «Вид», и там выберите «Показать скрытые устройства»;

После проведения указанных операций всё должно работать.

Способ №2. Ручное обновление драйверов для блютуз

При реализации данного способа нам потребуется установить на ПК специальный программный инструмент под названием «Microsoft Mobile Dеvice». Если вы знаете разрядность вашей ОС – прекрасно, если нет – нажмите на кнопки Win + Pause, просмотрите значение параметра «Тип системы», и установите разрядность вашей ОС.

Загрузите и установите соответствующий пакет в системе. После этого переходим к обновлению драйверов для периферийного блютуз-устройства:

В Диспетчере устройств вместо проблемного устройства в «Радиомодули блютуз» появится установленное нами устройство. Если в ДУ имеются несколько проблемных периферийных устройств, повторите данную операцию с каждым из них, всё должно работать.

Способ №3. Использование опции портов (COM & LPT)

Данный способ аналогичен предыдущему, только вместо выбора «Радиомодули блютуз» необходимо выбрать порты (COM & LPT).

Затем в открывшейся таблице изготовителя и модели устройства слева выберите «Microsoft», а справа «Standard Serial over Bluetooth link».

Нажмите на «Далее», после чего завершите процесс установки. Осуществите данную процедуру для всех периферийных проблемных устройств, перечисленных в Диспетчере устройств.

Способ №4. Задействование специальных программ

Ещё одним эффективным способом решения проблемы является задействование специальных программ для установки драйверов уровня «ДрайверПак Солюшн». Они просканируют систему, а затем позволят скачать бесплатно драйвер bluetooth для windows 7, после чего установят его на ПК.

Воспользуйтесь бесплатным инструментом «ДрайверПак Солюшн»

Заключение

Если у вас возникла проблема с периферийным устройством Bluetooth на Виндовс 7, тогда рекомендую воспользоваться функционалом описанных выше четырёх способов, и скачать драйвер на ваш ПК. Каждый из упомянутых способов доказал свою эффективность в решении рассмотренной выше дисфункции, потому вы можете смело задействовать данные инструменты для нормализации работы периферийных устройств блютуз на вашем ПК.

How to Connect Your iPhone or iPod With Windows 7 Via Bluetooth

Previously we’ve talked about how to sync up Bluetooth devices to Windows 7, but we haven’t talked much about how to do it with iOS. Today we’ll cover a brief walkthrough of setting up a Bluetooth connection between an iPhone or iPod Touch and a computer running Windows 7. There is a handy remote control feature to try out once connected, and even more features – if you have performed a jailbreak on your device.

Step 1 (from your iPhone or iPod)

Tap the Settings app from your home screen. Our end destination is going to be:

Settings > General > Bluetooth

Once in Bluetooth, Tap the switch to set it to on. Your device should now be discoverable by your computer.

Step 2 (from your Windows computer)

Click the Start menu orb and Type bluetooth into the search box. From the list of Control Panel results, Click Add a Bluetooth device.

A new window should pop-up, and in the middle of the window will be a white box where your iPhone or iPod should appear. Select your device and then Click Next.

Important: Before you Click Next, make sure that your iPhone’s screen is unlocked (and not in sleep mode.)

Step 3

Now there are two possible scenarios – depending upon how your computer’s Bluetooth software is setup. I’ve labeled these 1 and 2.

Important: Once you start pairing you have about 25 seconds to complete or the process will time-out, and you will have to start over.

Scenario 1 – You’ll be prompted with three different pairing options. Choose Create a pairing code for me. The window will then change to display a 6-8 digit pairing code.

An Enter-pin dialog should pop-up on your iPhone. Just Tap in the code displayed on your computer, and then Press the Pair button.

Scenario 2 – If the above first scenario didn’t show up for you, then this one will. Your computer should automatically generate a pin, and then on your iPhone, you should have a small Push notification alerting you that it is trying to connect. Just Select Yes and Click Next on your computer.

At the same time, Tap Pair on your iPhone.

Your computer and your iPhone or iPod Touch should now be paired via Bluetooth. Now you can use your computer to control or play songs from your device. If you go to the system tray’s garage, it should now have a little remote control icon for your iPhone or iPod Touch. With the remote control, you can stop or play songs, switch between them, and control volume.

On your iPhone, you can select where you want the music to be played. Just go to a currently playing song or track and Click the down-arrow icon to make source options appear.

Overall the process was pretty simple, and the results are somewhat groovy. Unfortunately, Apple has locked down the device, and there isn’t much more you can do over Bluetooth. But, if you’ve jailbroken your iPhone then there is a whole new bag of features to explore over Bluetooth, even internet tethering.

Question: Q: iPhone 4 / Bluetooth / Windows 7 / Peripheral Device not installed?

I am unable to install my iphone 4 to the new laptop I have, OS Windows 7. The devices pair fine and recognize each other, I just keep receiving error messages when the driver automatically installs. It reads «Bluetooth Peripheral Device» not installed. Any solutions.

Asus Republic of Gamers, Windows 7, iphone 4

Posted on Nov 14, 2010 9:49 AM

All replies

Loading page content

Page content loaded

Dec 12, 2010 7:04 AM

it’s really a question of profiles
don’t think iphones and ipod and ipads offer en support for profiles to the computer
and don’t inspect for any on a computer

think bluetooth is pretty much only for headsets, keyboard, mice with these devices

you can’t sync over bluetooth anyway nor if you have a mac

Message was edited by: Rudegar

Dec 12, 2010 7:38 AM

Actually the solution is quite simple as I found out after trawling the web for days and trying various other solutions. (I find it odd that Apple don’t seem to mention this anywhere as it’s pretty basic to want to likn an IPhone 4 to a Windows 7 PC for thethering without a cable isn’t it?).

Right click on your Iphone in your bluetooth device screen in Win 7. Go to the Bluetooth Services Tab and unselect Wireless iAP. Bingo it will now work and won’t complain that it is missing a driver.

Dec 12, 2010 8:06 AM

Feb 10, 2011 10:47 PM

You need to hit «Pair» on the iPhone SIMULTANEOUSLY as you hit «Pair» on the W7. (words my choice). You have to allow on both devices.

Aug 30, 2011 7:28 PM

Aug 30, 2011 7:52 PM

I realise this is an old topic, but it seems everyone has the wrong band-aid fix.

The correct fix is as follows:

The issue is that Windows doesn’t recognise the iPhone as a Bluetooth Peripheral Device and cannot find the correct driver to download and install.

Follow the following steps:

— First, you need to install the appropriate ‘Windows Mobile Device Support’ software for your version of windows (32 and 64 bit versions have different files to download). It may look like it didn’t install in Windows 7, but that’s ok. It did.

— Turn on the bluetooth discovery mode on the iPhone.

— Select ‘Add a Device’ in Devices and Printers, follow the instructions to connect and enter the 8 or 9 digit key into your iPhone.

— Your iPhone should be found and automatically install all the software and drivers except for the Bluetooth Peripheral Device driver.

— In Devices and Printers, right click the iPhone, select properties, and then the hardware tab.

— The first device function should be ‘HID-compliant consumer control device. Ensure it’s selected.

— Select Properties, and in the next window select ‘update driver’

— Select ‘Browse my computer for driver software’

— Select ‘Let me pick from a list of device drivers on my computer’

— Select ‘Bluetooth Radio’ from the left hand side listing

— In the next window, select ‘Microsoft Corporation’ on the left, and ‘Windows Mobile-based Device support’ from the right side.

— Install this option, clicking through the warnings and accepting this option.

I hope this helps. This is the proper fix. Not the ‘pressing two keys at the same time’ or unchecking the option that only allows some features to be used.

Question: Q: iphone bluetooth driver for windows 7

I am not able to connect iphone 4s to windows 7 32 bit OS via bluetooth

Posted on Jun 15, 2012 8:22 AM

All replies

Loading page content

Page content loaded

No. You can’t. That’s not a feature of the iPhone.

The only thing for which you can use bluetooth with a PC is tethering the phone’s 3G Internet connection.

Jun 15, 2012 8:33 AM

This has never been a feature of iphone.

Jun 15, 2012 8:33 AM

I was just able to setup a bluetooth connection between my iPhone 4s and my Windows 7 PC and I’m streaming music through much better speakers. It was all plug-and-play to download the audio driver. Just «Add a Bluetooth Device» in the hardware section of Control Panel while viewing bluetooth devices on your iPhone (so that it is discoverable). I’m not sure why people are saying that you can’t when it is so easy.

Jun 20, 2012 11:06 AM

Because you can’t. What you have apparently set up is a driver that allows you to use A2DP audio streaming. That’s a different animal.

Jun 20, 2012 11:31 AM

A2DP is streamed over a Bluetooth connection. This is just what I wanted to do when finding this discussion and I’m glad that I didn’t give up based on the comments here!

Puli asked if he could connect to his Windows 7 PC using Bluetooth. Are you making some assumption that I am missing about specific protocols and services?

I can say that «yes» you certainly can connect via Bluetooth to a Windows 7 PC (that was the question) at the very least to stream audio, because I’ve done it.

With only 3 days of iPhone experince, I can assure readers that this earlier statement is not true:

» The only thing for which you can use bluetooth with a PC is tethering the phone’s 3G Internet connection. «

Jun 20, 2012 5:09 PM

Hi, I am trying this but the drivers fail to load or can not be found and the pairing is then unsuccessful. Any tips please?

I know this thread is 5 months old, but where did you find the «add a bluetooth device» tab in the hardware section of the control panel?

Nov 21, 2012 3:32 PM

I have an iPhone 3GS and I can use bluetooth to tether my internet to my windows7 laptop.

I have a bluetooth icon on my taskbar, right click will open a menu. Click on add a device, once you’ve paired your iphone you can connecto to it.

Select the device and connect using access point that will share the iphone’s internet to the laptop.

Nov 28, 2012 4:19 PM

The Iphone is saying «No connected» now even though the laptop and the phone are both side by side.

I think the problem is the lack of a driver which on pairing the Laptop couldn’t find even though the connection is working.

Dec 5, 2012 11:55 PM

it’s working for me 🙂

Ou install this software and update drivers: http://www.drivermagician.com/

Oct 14, 2014 8:15 AM

this finally fixed my problem! I have been trying to connect by iPhone to my Windows 7 PC forever. Thank you so much!

I have installed the Broadcom driver that Edbrows points to, and it will indeed play music. But that’s it.

I’m a Mac person through and through, but I find this lack of Bluetooth support between the most ubiquitous phone and the most ubiquitous operating system totally unacceptable. Really, Apple? We’re still playing these games? I need to transfer a photo from my phone to my work computer, and I left the cable at home. So I’m out of luck today. Wow. Craptacular.

I need to transfer a photo from my phone to my work computer, and I left the cable at home. So I’m out of luck today. Wow. Craptacular.

Sure is. Because of course you can’t email the photo to yourself, and download the photo from your email onto your work computer.

iOS Bluetooth has never been advertised or designed for file transfer from an iOS device to a computer. So, expecting a feature that the company never said was available is ridiculous. and getting upset about it is even more ridiculous.

My iPhone can’t be used as microwave to heat my food! Gosh durn it Apple.

I find that comment/attitude absurd. People expect un-stated features all the time. It’s called advancement/innovation. It’s got nothing to do with what the manufacturer advertised it could/couldn’t do at some point in time.

Of course, I am not talking cooking, I am talking Bluetooth transfers!

If a feature is useful/desirable and reasonable we should expect a manufacturer to implement it. If not, that manufacturer is falling behind, and we go and buy somewhere else.

I’m with Bri Guy. This is a feature my Nokia ‘feature phone’ had years ago. Lame that we are going backwards.

In the early days, Apple stuff ‘just worked’. Those days are gone, and Apple functionality looks a lot like their competitors these days (often behind even), just with a bit more gloss and shine. Whoopee.

Pair a Bluetooth device in Windows

You can pair all kinds of Bluetooth devices with your PC—including keyboards, mice, phones, speakers, and a whole lot more. To do this, your PC will need to have Bluetooth. Some PCs, such as laptops and tablets, have Bluetooth built in. If your PC doesn’t, you can plug a USB Bluetooth adapter into the USB port on your PC to get it.

Before you start, make sure that your Windows 10 PC supports Bluetooth. For more info on how to check, see Fix Bluetooth problems in Windows 10. If you need help adding a device without Bluetooth capabilities, see Add a device to a Windows 10 PC.

Turn on Bluetooth

After you’ve checked that your Windows 10 PC supports Bluetooth, you’ll need to turn it on. Here’s how:

Select Start > Settings > Devices > Bluetooth & other devices, and turn on Bluetooth.

Action center can be found next to time and date on your taskbar. On the taskbar, select action center ( or ), then select Bluetooth to turn it on. If it’s turned off, it might appear as Not connected.

If you don’t see Bluetooth in your action center, here’s how you can change it:

Expand quick actions. On the taskbar, select action center ( or ) > Expand. Bluetooth should appear here. It will appear as Bluetooth or Not connected.

Add Bluetooth to action center. Select Start > Settings > System > Notifications & actions > Quick actions. Go to Add or remove quick actions and turn on Bluetooth.

Note: For more info about how to change the apps and settings that appear in action center, see Change notification and action settings in Windows 10.

To pair a Bluetooth headset, speaker, or other audio device

Turn on your Bluetooth audio device and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.

On your PC, select Start > Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Choose the device and follow additional instructions if they appear, then select Done.

Your Bluetooth device and PC will usually automatically connect anytime the two devices are in range of each other with Bluetooth turned on.

To pair a Bluetooth keyboard, mouse, or other device

Turn on your Bluetooth keyboard, mouse, or other device and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufactur’s website to learn how.

To pair a Bluetooth printer or scanner

Turn on your Bluetooth printer or scanner and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.

Select Start > Settings > Devices > Printers & scanners > Add a printer or scanner. Wait for it to find nearby printers, then choose the one you want to use and select Add device.

If you’re having installation issues with your printer or scanner, see either Fix printer problems or Install and use a scanner in Windows 10.

To pair a Bluetooth device using Swift Pair

Swift Pair in Windows 10 lets you quickly pair a supported Bluetooth device with your PC. If the Bluetooth device supports Swift Pair, you’ll receive a notification when it’s nearby and you put it into pairing mode to make it discoverable.

Turn on a Bluetooth device that supports Swift Pair and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn more.

If this is your first time using Swift Pair, select Yes when asked if you want to get notifications and use Swift Pair.

When a notification appears that a new Bluetooth device was found, select Connect.

After it’s connected, select Close.

Before you start, make sure that your Windows 8 PC supports Bluetooth.

Turn on your Bluetooth device and make it discoverable.

The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.

Select Start > type Bluetooth > select Bluetooth settings from the list.

Turn on Bluetooth > select the device > Pair.

Follow any instructions if they appear. Otherwise, you’re done and connected.

Your Bluetooth device and PC will usually automatically connect anytime the two devices are in range of each other with Bluetooth turned on.

Before you start, make sure that your Windows 7 PC supports Bluetooth.

Turn on your Bluetooth device and make it discoverable.

The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.Turn on your Bluetooth device and make it discoverable. The way you make it discoverable depends on the device. Check the device or visit the manufacturer’s website to learn how.

Select Start > Devices and Printers.

Select Add a device > select the device > Next.

Follow any other instructions that might appear. Otherwise, you’re done and connected.

Your Bluetooth device and PC will usually automatically connect anytime the two devices are in range of each other with Bluetooth turned on.

Источник

Bluetooth iphone windows 7 bluetooth peripheral device

Как подключить iPhone или iPod к Windows 7 через Bluetooth

Шаг 1 ( с вашего iPhone или iPod )

Шаг 2 ( на вашем компьютере с Windows )

Шаг 3

Готово!