- Com apple applefscompressiontypezlib kmod start hackintosh
- Stuck as AppleFSCompressionTypeZlib
- grifb
- RehabMan
- grifb
- RehabMan
- grifb
- El Capital Boot Stuck at com.apple.AppleFSCompressionTypeZLib kmod start
- bidio
- nasser12nasser
- RehabMan
- bidio
- RehabMan
- bidio
- RehabMan
- bidio
- RehabMan
- bidio
- Hackintosh doesn’t boot: AppleKeyStore starting
- iKnbbl
Com apple applefscompressiontypezlib kmod start hackintosh
- UEFI bios:
- Скидываем все настройки в default.
- AHCI — enable;
- Vt-d: Disable (+ в Clover дропнуть DMAR таблицу)
- Vt-x: Enable (только для 10.13 и если используете виртуальные машины)
- Intel Virtualization Technology — Enable
- Serial-port: Disable
- XHCI Hand-off: Disable (рекомендуеться)
- XHCI Hand-off: Enabled (только если что то не работает в режиме Disable )
- IOAPIC 24-119 Entries: Enabled (подмечено что у многих с этим пунктом паникует, поэтому тестируйте)
- CSM: Disable (по возможности)
- Fasboot: Disable
- Secure boot: Disable or Other OS
Legacy bios:
. .
[i]Примечание:
- HDD должен быть подключен к SATA-0, контролер Intel.
- . [/i]
Для установки потребуется флешка не менее 8Гб.
- ПК на ОС Windows XP/7/8.
- Скачать утилиту Boot Disk Utility с страницы разработчика cvad или с форума applelife.ru со страницы посвящённой данной утилите.
- Установить по инструкции
- Зайти на флешку в папку EFI\CLOVER\ и удалить папку OEM и файл config-sample (не путать с config.plist).
- Зайти на https://github.com/aci…pleSupportPkg/releases скачать ApfsDriverLoader.efi и скопировать его в папку EFI\CLOVER\drivers64UEFI (необходимо для macOs 10.13 и выше!)
- Добавить в EFI\CLOVER\Kext\Other https://github.com/acidanthera/Lilu/releases
- Добавить в EFI\CLOVER\Kext\Other https://github.com/aci…WhateverGreen/releases
- Скачать образ Mac OS X по указанным ссылкам:
Нажми и качай! - Развернуть скаченный образ на подготовленную флешку.
- Инструкция с applelife.ru пункт «Заливка дистрибутива macOS на второй том загрузочного USB Flash drive:«:
- Перед распаковкой образа необходимо нажать кнопку ^Format disk^.
- В основном окне программы -> Destination Disk — выбираем наш USB Flash Drive -> Part2.
- Нажимаем кнопку «Restore Partition».
- В открывшемся окне проводника выбираем распакованный файл с расширением *.hfs.
- Тем, кто устанавливает на ноутбук (или имеет PS/2 мышь или клавиатуру) , обязательно скачать
VoodooPS2Controller.kext.zip ( 97.46 КБ )
, новая версия:VoodooPS2Controller.kext.zip ( 93.86 КБ )
положить в папку EFI/CLOVER/KEXT/10.X или Other - Всё, установочная флешка готова, можно приступать к установке.
За данный споcоб установки благодарим cvad и Skvo
Данная инструкция написана по материалам с applelife.ru
Установить один из загрузчиков на диск (если он не входит в состав сборки) :
— Загрузчик №1 — Clover (рекомендуется для большинства пользователей);
Как это сделать: UEFI, Legacy BIOS.
— Загрузчик №2 — OpenCore (для опытных пользователей)
— Загрузчик №3 — Chameleon (на данный момент существует для очень старых систем и особых случаев);
*загрузчик устанавливаем только один, на ваш выбор
После входа в macOS первое, что делаем:
- Устанавливаем кекст для сетевой карты;
- Настраиваем SMbios;
- «Заводим» видео-карту (разрешение должно быть правильным, и верхняя строка прозрачная);
- Поднимаем «нативное управление питанием» процессора;
- Поднимаем звук через AppleALC или VoodooHDA
.
21. Ставим програмулинки и «рюшечки».
Источник
Stuck as AppleFSCompressionTypeZlib
grifb
cant install stuck loading at
AppleFSCompressionTypeDataless kmod start
AppleFSCompressionTypeZlib kmod start
AppleFSCompressionTypeDataless load succeeded
AppleFSCompressionTypeZlib load succeeded
system
asus rog g501jw
Graphics — gtx 960m
processor — i7 haswell
ive patched my kernels and tried all sorts of boot flags none work. i can’t disable my intel graphics from bios. vt-d is off and virtualization is off.
please help!!
RehabMan
Moderator
cant install stuck loading at
AppleFSCompressionTypeDataless kmod start
AppleFSCompressionTypeZlib kmod start
AppleFSCompressionTypeDataless load succeeded
AppleFSCompressionTypeZlib load succeeded
system
asus rog g501jw
Graphics — gtx 960m
processor — i7 haswell
ive patched my kernels and tried all sorts of boot flags none work. i can’t disable my intel graphics from bios. vt-d is off and virtualization is off.
please help!!
grifb
i can pretty far in verbose mode using clover i keep getting stuck with the nvidia errors
NVDAStartup Official
hmm.. mismatch sizes: 3100 vs 20
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
i have tried removing and changing some of the boot args but can’t seem to get passed
RehabMan
Moderator
i can pretty far in verbose mode using clover i keep getting stuck with the nvidia errors
NVDAStartup Official
hmm.. mismatch sizes: 3100 vs 20
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
NVDA: disabled by nv_disabled=1 boot-arg
i have tried removing and changing some of the boot args but can’t seem to get passed
Those are not errors.
Post EFI/Clover folder. Post photo where it stops in verbose boot.
Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)
System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution
For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366×768
Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
grifb
Those are not errors.
Post EFI/Clover folder. Post photo where it stops in verbose boot.
Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)
System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution
For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366×768
Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
I couldn’t find hardly any of my components in the signature editor
what i have listed is what CPU-Z has shown
but this is what i have currently:
Mobo: ASUSTeK COMPUTER INC. G501JW, BIOS: AmMegatrends Inc. , Bootloader: CloverCPU
CPU: Intel i7 4720HQ, Haswell, HM87Graphics
Graphics: HD Graphics 4600, Nvidia GTX 960m, Resolution 3840x2860Other Hardware
Ram: DDR3 16GB
Here is the boot options from clover:
Here is the verbose output:
Источник
El Capital Boot Stuck at com.apple.AppleFSCompressionTypeZLib kmod start
bidio
running my first installation on Intel Ultrabook -El Capitan — UEFI mode Unibeast 6.0:
Boot Flags:
-v -x dart=0 GraphicsEnabler=Yes/No PCIRootUID=0
Machine:
Ultrabook acer m5-481t-6662 14
intel ci53317u
500gb Disk+ ssd 20gb
mem 4g (2*2) ddr3
video intel hd graphics 4000
14\» hd 1366×768 resolution acer cinecrystal led web cam hd / 2-in-1 card reader 802.11b/g/n + bluetooth 4.0 (rj-45), 3usb 3.0, hdmi dvdrw
Any help would be more than welcome , thanks.
nasser12nasser
RehabMan
Moderator
running my first installation on Intel Ultrabook -El Capitan — UEFI mode Unibeast 6.0:
Boot Flags:
-v -x dart=0 GraphicsEnabler=Yes/No PCIRootUID=0
Machine:
Ultrabook acer m5-481t-6662 14
intel ci53317u
500gb Disk+ ssd 20gb
mem 4g (2*2) ddr3
video intel hd graphics 4000
14\» hd 1366×768 resolution acer cinecrystal led web cam hd / 2-in-1 card reader 802.11b/g/n + bluetooth 4.0 (rj-45), 3usb 3.0, hdmi dvdrw
Any help would be more than welcome , thanks.
Follow Clover guide linked from FAQ.
bidio
RehabMan
Moderator
Solution is to follow the guide.
bidio
I tried using Clover 2.3k r3291 ( not sure if rxxxx is the correct ). I get the installation screen, but when selecting the disk ( formatted OSX Extended Journaled — GUID Partition Map ) I got this message
os x could not be installed on your computer couldn’t attach disk image
And I am forced to restart the machine.
Any help on this ? I have read all the links and google it but not success.
RehabMan
Moderator
I tried using Clover 2.3k r3291 ( not sure if rxxxx is the correct ). I get the installation screen, but when selecting the disk ( formatted OSX Extended Journaled — GUID Partition Map ) I got this message
os x could not be installed on your computer couldn’t attach disk image
And I am forced to restart the machine.
Any help on this ? I have read all the links and google it but not success.
bidio
RehabMan
Moderator
bidio
Ok, the machine I am using is
Machine:
Ultrabook acer m5-481t-6662 14
intel ci53317u
500gb Disk+ ssd 20gb
mem 4g (2*2) ddr3
video intel hd graphics 4000
14\» hd 1366×768 resolution acer cinecrystal led web cam hd / 2-in-1 card reader 802.11b/g/n + bluetooth 4.0 (rj-45), 3usb 3.0, hdmi dvdrw
installed el capitan using the clover version I mentioned before, then boot from usb.
initial boot flags are kext-dev-mode=1 rootless=0 and i just added -x otherwise the boot does not work. tried -v but nothing happens, maybe this flag is just for Unibeast.
after couple of minutes I get the installation screen. then I formatted both disk using disk utility, select the SSD, erase , name untitled ( the keyboard of my laptop does not work on this installation process ) format OSX extended journaled , scheme GUID Partition Map . then select this disk for the installation. continue. after couple of second I get the error I mentioned .
Maybe I need to force some more flags ? Or the clover process to put the OS in the USB stick is not correct.
Источник
Hackintosh doesn’t boot: AppleKeyStore starting
iKnbbl
[SOLVED] Hackintosh doesn’t boot: AppleKeyStore starting
Hi guys,
my new Hackintosh does not boot up to OS X 10.9.4 properly after initial boot up and setup through MultiBeast.
My config:
i7-4970k
GigaByte GA-Z97M-D3H
GigaByte 770GTX
I set up my Bios like it was described in several threads in the forum before and got to the Mavericks installation with -v -x without issues on the only installed SSD.
MultiBeast settings:
Quick Start > DSDT Free
Drivers > Audio > Realtek ALCxxx > ALC892
Drivers > Audio > Realtek ALCxxx > Intel 9 Series Motherboard Support Drivers > Disk > 3rd Party SATA
Drivers > Disk > TRIM Enabler > 10.9.4 TRIM Patch
Drivers > Misc > FakeSMC v6.9.1315
Drivers > Misc > FakeSMC v6.9.1315 Plugins
Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application Drivers > Network > Realtek > RealtekRTL8111 v1.2.0 Drivers > System > AppleRTC Patch for CMOS Reset Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options Customize > Boot Options > Generate CPU States Customize > Boot Options > Hibernate Mode — Desktop Customize > Boot Options > Instant Menu
Customize > Boot Options > Use KernelCache Customize > Boot Options > Verbose Boot
Customize > System Definitions > Mac Pro > Mac Pro 3,1 Customize > Themes > tonymacx86 Black
But now, after the setup through MultiBeast, Bootup stucks/hangs at «AppleKeyStore starting» (I assume), picture attached.
Anyone has any idea?
Thanks in advance!
Источник