Connect iphone to iphone with bluetooth

If you can’t connect a Bluetooth accessory to your iPhone, iPad, or iPod touch

If your Bluetooth accessory won’t pair or connect to your iOS or iPadOS device, learn what to do.

If you can’t connect to one of these devices

To get help pairing a Bluetooth accessory—like a wireless keyboard—to your iOS or iPadOS device, try these steps:

1. Make sure that your Bluetooth accessory and iOS or iPadOS device are close to each other.
2. Turn your Bluetooth accessory off and back on again.
3. Make sure that your Bluetooth accessory is on and fully charged or connected to power. If your accessory uses batteries, see if they need to be replaced.
4. If there’s an app that you use with the Bluetooth accessory, go to Settings > Privacy > Bluetooth on your iOS or iPadOS device, and make sure that you’ve turned on Bluetooth for the app.

If you still can’t pair or connect your Bluetooth accessory

1. If you previously connected your Bluetooth accessory to your iOS or iPadOS device, unpair the accessory, put it back in discovery mode, then try to pair and connect it again.
2. If you can pair your accessory with some devices but not your iOS or iPadOS device, unpair the accessory from your other devices. Then try to pair with your iOS or iPadOS device again.
3. Check with the accessory manufacturer to make sure that your accessory supports your iOS or iPadOS device.
4. If you still have any of these issues, contact Apple Support:
   • You can’t turn on Bluetooth or the setting is grayed out.
   • You can’t connect any Bluetooth accessories with your device.
   • The accessory manufacturer confirmed that your accessory is working correctly.

Learn more

If you need help pairing a Bluetooth accessory to your Apple TV, learn what to do.

Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Contact the vendor for additional information.

Источник

Bluetooth Terminal 4+

Bluetooth LE Smart Prototyping

Lukas Pistrol

• • #39 in Developer Tools

• • Free
  • Offers In-App Purchases

Screenshots

Description

Version 3 is here completely redesigned and rewritten!

## Version 3.0.0 is now available ##

With Bluetooth LE Terminal you can easily prototype your Bluetooth Smart enabled hardware. Send individual bytes encoded as ASCII, HEX or Decimal numbers and receive data from your hardware accessory.

Test your data transfers even before having your own app!

# More Features:
• Send bytes as ASCII, HEX or Decimal
• See device’s services and characteristics and their associated values
• Get information about your device such as name, UUID, and RSSI readings
• Setup a button matrix (game controller) to send different data with just a tap.
• Apple Watch support for button matrix
• Send the current time as a unix timestamp (seconds since 1970)
• Export current session as CSV

If you have any questions about the app, or requests for features you would like to see, just write a short review or use the button inside the app to contact me!

* Some features may require an optional one-time in app purchase.

Источник

ToothFairy 4+

Quick Bluetooth connections

C-Command Software, LLC

Screenshots

Description

Connect AirPods (or other Bluetooth headphones) to your Mac with a single click or keypress.

AirPods are great, but they don’t work quite as smoothly with Macs as they do iPhones. You can’t tell at a glance whether audio will play from the AirPods or your Mac’s built-in speaker, you have to dig into a Bluetooth submenu to connect, and then you have to go back to the menu to see when the AirPods are ready for use. ToothFairy streamlines this: just click an icon in the menu bar (or press a hotkey) to switch to the AirPods, and the icon always shows whether they’re connected.

— Works with AirPods, as well as any Bluetooth device that you can connect to your Mac: headphones, speakers, headsets, game pad controllers, keyboards, mice, etc. (HomePod is not supported, as it is not a Bluetooth audio device.)

— Click the hollow AirPods icon in the menu bar to switch to AirPods. It fills in to show they are connected and can also display a battery indicator. Now you know that it’s safe to start playing music; it won’t blast from your Mac’s internal speaker.

— Supports multiple Bluetooth audio devices; you can choose a different icon and hotkey for each.

— Get the best audio quality. macOS will normally use the SCO codec if it thinks you’re going to use the microphone. ToothFairy can ensure that it uses the higher quality AAC codec when you only care about audio output: listening to music or video or playing a game.

— Disconnect a Bluetooth device by clicking the icon (or pressing the hotkey) again, so that you can switch back to your phone. AirPods and Beats devices with an Apple W1 chip do not need to be manually disconnected, and you can set them to avoid accidental disconnections when pressing the hotkey multiple times.

— ToothFairy automatically launches at login, so it’s always there when you need it.

— Optionally hide the Dock icon so it only appears in the menu bar. With the Dock icon hidden, you can right-click (or Control-click) the menu bar icon to access the settings.

— Run a shell script when the AirPods are connected or disconnected, for example to notify you or to launch or quit another app. ToothFairy itself is also AppleScriptable, so you can control your devices from other apps (like Lacona) and automations.

— Use with your Magic Mouse or Magic Keyboard to make sure the battery level doesn’t get too low, or to quickly reconnect them after charging or if they get disconnected.

Note: ToothFairy works with devices that can be connected via the macOS Bluetooth menu. Please make sure the devices you want to connect have been paired to the system correctly before using them with ToothFairy. The battery indicator works with devices that can show their battery level in the Bluetooth pane of System Preferences.

“The ultimate ‘saved you a click’ app” —Dieter Bohn, The Verge

“Ideal for AirPods” —Matt Bolton, Mac|Life

“A must for Mac or MacBook owners” —Mike Peterson, AppleToolBox

Источник

AC Central: Bluetooth MIDI & AC Sabre Auto-Connect 4+

Air Craft

Designed for iPad

iPad Screenshots

Description

AC Central is a free auto-connection hub for the AC Sabre Motion MIDI Instrument (iPhone/iPod) and Bluetooth MIDI hardware. AC Central takes the hassle out of getting connected to your favourite synthesizers, samples and other sound machines. Plus, combined with Audiobus 3 (separate purchase, well worth it!), you can save and recall your complex multi-app setups and MIDI mappings with the touch of a button.

FEATURES:
* Zero-config, auto-connects to AC Sabre and compatible BT midi hardware
* Full Audiobus 3 support
* AB3 State Saving of settings from local synths’ *and* remotely connected AC Sabre’s
* Multiple inputs and outputs
* Works with built-in CoreMIDI if you don’t have Audiobus 3

What’s New

This app has been updated by Apple to display the Apple Watch app icon.

Audiobus 3 support fix

App Privacy

The developer, Air Craft , has not provided details about its privacy practices and handling of data to Apple.

No Details Provided

The developer will be required to provide privacy details when they submit their next app update.

Источник

NANPA — Connect with Bluetooth 17+

Naoki Nakajo

• • Бесплатно
  • Включает встроенные покупки

Снимки экрана

Описание

When you start communicating by pressing the button, start the Bluetooth communication. When the app discovers the nearby NANPA user, the icon will flash, and displays the number of users.
Rough location information at the time of communication start is saved to iCloud, users in communication will be displayed on the map.

● It is using the MultipeerConnectivity of iOS in communication with the nearby user. It does not perform any other information exchange in only attempts to connect.
● The location information is displayed in 300m about accuracy. It will be darker as there are numerous users. In addition, if the number of users increases, it will be 100 meters accuracy.
● Save the only location information that has been meshed in about 100m in the public area of ​​the iCloud. It takes care of the protection of personal information.
● When the app has become the background, the connection will stop.
● You can set to «Never sleep during connection» or «Never sleep always».
● If the same iCloud account is configured in multiple devices, there is a problem with the real-time search of the spot.
● It displays a banner ad. In addition, it will display an interstitial ad at the beginning of the public, either at the public end.
● You can hide the ad by the In-App Purchase.

Что нового

This app has been updated by Apple to display the Apple Watch app icon.

Minor bug fixes.

Конфиденциальность приложения

Разработчик Naoki Nakajo не сообщил Apple о своей политике конфиденциальности и используемых им способах обработки данных.

Нет сведений

Разработчик будет обязан предоставить сведения о конфиденциальности при отправке следующего обновления приложения.

Источник