Dolby atmos xda android 10

Dolby atmos xda android 10

Краткое описание:
Эквалайзер и звуковые эффекты.

Эквалайзер и звуковые эффекты Dolby Atmos, портированные из прошивки Lenovo. Должны работать на всех устройствах с Android 4.3+, т.к. являются программными.
Изменения звука глобальные, т.е. во всех приложениях. Dolby Atmos совместим с другими улучшайзерами.

Эффекты:
Surround Virtualizer — псевдо-3D звук
Dialogue Enhancer — разборчивость речи
Volume Leveler — нормализация громкости

Установка:
Установить zip с помощью рекавери

Удаление:
В рекавери запустить DA_Uninstaller.zip
Описание настроек Dolby Atmos. — Сообщение №3638, автор qqnq

Требуется Android: 4.3+
Русский интерфейс: Есть русифицированная версия

Скачать:
Версия: R6.5 DA_R6.5.zip ( 2.83 МБ )

All version (from XDA) Dolby ATMOS (Пост FD_KIM #62500064)
Dolby universal (Android 4.2.2) Dolby ATMOS (Пост D.A.R.K. angel #50304815)
Тестовая версия 9.0+ Сообщение №4110, автор repey6
Удаляльщик
В версии R6.5.1 исправлено некорректное удаление приложения из KitKat
DA_Uninstaller_R6.5.1.zip ( 1.43 КБ )

R1
· Первая версия

R4
· Исправлены проблемы совместимости с Android 4.x
· Изменены идентификатор и имя библиотеки, для предотвращения конфликтов с другими библиотеками Dolby

R5
· Удалено демо видео, размер уменьшен до 3 mb

R6.1
· Изменено пространство имён (namespace) идентификаторов, для предотвращения конфликтов с др. продуктами Dolby
· Названия APK и папок изменены с Ds и DsUI на As и AsUI, по той же причине

R6.2
· При наличии сразу двух файлов — /system/etc/audio_effects.conf и /system/vendor/etc/audio_effects.conf, изменения будут вноситься в оба, для избежания неработосп. мода из-за других аудио модов, некорректно изменяющих audio_effects.conf или создающих неиспользуемый audio_effects.conf в /system/vendor/etc

R6.3
· Установочный скрипт корректирует разрешения файлов приложения

R6.5
· Скорректировано выставление разрешений
· Исправлено удаление предыдущей версии при установке
· Добавлен отдельный архив с унинсталлером

Сообщение отредактировал Slav_nsk — 25.10.20, 16:17

Приложение остановлено. Телефон в профиле. 4.4.2.

На последней версии все работает.

Сообщение отредактировал sosed.68 — 22.07.15, 07:39

Источник

[Guide] [No Root] How to unlock Dolby Atmos equalizer (OxygenOS 10 Only!))

Rayekk

Senior Member

Some time ago I was looking for a way to get a system audio equalizer and I accidentally found an application that can be very useful for all of you!

As you know, OnePlus 7 Pro has Dolby Atmos support, but controlling it is limited to 3 presets, we cannot control the sound ourselves, we can only do it after connecting headphones, previously I had the Galaxy S9, which also has Dolby Atmos, but there is full access to the equalizer that significantly improves the sound quality, which is why I was surprised that OnePlus does not give us such a possibility, as far as I know equalier for the speaker was once available in the global version of the software, but later they removed it in the update.
It turns out that we can control Dolby Atmos ourselves, only the phone settings application does not allow it, but you can work around it!

In these few steps you will get full control over Dolby Atmos and even be able to turn it off:

Читайте также:  Гликемический индекс для андроида

Step 1: Download «Minimal ADB and Fastboot» to your computer, then enable USB debugging on your phone, then connect the phone to the computer and run the file «cmd-here», which you will find in the folder with ADB and Fastboot.

Step 2: Now you need to debloat the Dolby Atmos system controller, to do this, you must enter the following commands in the fastboot console: (don’t forget to allow USB debugging on your phone! After connecting the phone to the computer, the phone will ask you if you allow it)

If all went well, then you should see the message «Success» in the console, now you need to restart the phone, when it reboots, you will not find the «Dolby Atmos» in the phone’s settings and thats okay.
If you don’t do it then the Dolby settings will reset once in a while, e.g. after a system reboot, that’s why you had to do step 1 and 2 first before downloading the application.

You can also restore Dolby system settings at any time using this command in adb shell, but I don’t recommend doing it if you want to use another Dolby control app:

Step 3: Download and install the Dolby Atmos control app on your OnePlus: APKMirror download

And you’re done! From now, Dolby Atmos control takes place only in this downloaded app, this is not any typical equalier you will find on Google Play, it is a Dolby system controller which means that it will work all the time, it will not be turned off when you close the app, this app replaces the Dolby system settings you just turned off.

Edit 04.11.2020
Dolby Atmos for OxygenOS 11 can be found in this thread.

Источник

Dolby atmos xda android 10

Краткое описание:
Эквалайзер и звуковые эффекты.

Эквалайзер и звуковые эффекты Dolby Atmos, портированные из прошивки Lenovo. Должны работать на всех устройствах с Android 4.3+, т.к. являются программными.
Изменения звука глобальные, т.е. во всех приложениях. Dolby Atmos совместим с другими улучшайзерами.

Эффекты:
Surround Virtualizer — псевдо-3D звук
Dialogue Enhancer — разборчивость речи
Volume Leveler — нормализация громкости

Установка:
Установить zip с помощью рекавери

Удаление:
В рекавери запустить DA_Uninstaller.zip
Описание настроек Dolby Atmos. — Сообщение №3638, автор qqnq

Требуется Android: 4.3+
Русский интерфейс: Есть русифицированная версия

Скачать:
Версия: R6.5 DA_R6.5.zip ( 2.83 МБ )

All version (from XDA) Dolby ATMOS (Пост FD_KIM #62500064)
Dolby universal (Android 4.2.2) Dolby ATMOS (Пост D.A.R.K. angel #50304815)
Тестовая версия 9.0+ Сообщение №4110, автор repey6
Удаляльщик
В версии R6.5.1 исправлено некорректное удаление приложения из KitKat
DA_Uninstaller_R6.5.1.zip ( 1.43 КБ )

R1
· Первая версия

R4
· Исправлены проблемы совместимости с Android 4.x
· Изменены идентификатор и имя библиотеки, для предотвращения конфликтов с другими библиотеками Dolby

R5
· Удалено демо видео, размер уменьшен до 3 mb

R6.1
· Изменено пространство имён (namespace) идентификаторов, для предотвращения конфликтов с др. продуктами Dolby
· Названия APK и папок изменены с Ds и DsUI на As и AsUI, по той же причине

R6.2
· При наличии сразу двух файлов — /system/etc/audio_effects.conf и /system/vendor/etc/audio_effects.conf, изменения будут вноситься в оба, для избежания неработосп. мода из-за других аудио модов, некорректно изменяющих audio_effects.conf или создающих неиспользуемый audio_effects.conf в /system/vendor/etc

Читайте также:  Как узнать введенный пароль wifi андроид

R6.3
· Установочный скрипт корректирует разрешения файлов приложения

R6.5
· Скорректировано выставление разрешений
· Исправлено удаление предыдущей версии при установке
· Добавлен отдельный архив с унинсталлером

Сообщение отредактировал Slav_nsk — 25.10.20, 16:17

Приложение остановлено. Телефон в профиле. 4.4.2.

На последней версии все работает.

Сообщение отредактировал sosed.68 — 22.07.15, 07:39

Источник

[Release Candidate] Dolby Atmos™

guitardedhero

Senior Member

Release Candidates for 9.0+ begin on page 458 and on Telegram.

The troubleshooting guide for Release Candidates is in this post.
updated 20200206

Description :

    Dolby Atmos™ Digital Signal Processer with effects and Graphic User Interface ported from the latest ZTE™ Axon 7 Android Oreo firmware intended for all Android devices on Android Oreo.

Dolby Atmos™ sound effects applied to media audio output supporting various media players.

Flexible custom recovery installation archive supporting Magisk and SuperSU installations as well as existing audio mod installations — fully supporting Enforcing SELinux Mode:

    Multiple installation scenarios available using the included arise_parameters.prop that is automatically copied to /sdcard if not already there. When edited by the user in this /sdcard location, arise_parameters.prop can:

    Instruct an installation directly to /system if a Magisk user prefers a /system installation over the Magisk module installation.

  • Instruct a system-less module installation using /su if a SuperSU user with the system-less SuperSU installation prefers a module installation for a variety of reasons such as insufficient /system space to accommodate a /system installation or the convenience of a persistent installation unaffected by rom updates.
  • An independent build maintained by @[B]Zackptg5[/B] fully integrated with Unity:

      Active accommodation of existing and future Magisk modules relevant to audio modification.

    Flashing the installation archive over a current installation results with an uninstallation of the Dolby Atmos™ Magisk module.

    Details :

      A minimum of SDK 26 (Android 8.0) is required for installation to begin, else Exit 1 will abort the recovery installation activity.

    A root solution or a capable kernel is required in order to automate the execution of scripts during boot to allow the appropriate sepolicy rules necessary for Dolby Atmos™ functionality while in Enforcing SELinux mode.

    Third party audio effects and DSP’s such as ViPER4Android ( Instructions :

      Performing a backup of the /system partition in recovery is encouraged for users receiving a /system installation:
    • TWRP > Backup > Check System > Edit name, if desired > Swipe to perform backup operation

  • Confirm device requirements are met and installation results are acceptable.

    Confirm an escape route is available in the event of unsuccessful device boot or unsatisfactory experience.

    Confirm successful download and location of downloaded archive(s).

    Boot to recovery > Install > *.zip > Swipe to perform installation operation > Advanced > Copy Log > Reboot

  • Updating procedure is no different unless specified otherwise.

    • Unsuccessful device boot:


        If experiencing a bootloop.
    • Wait until at least 60 seconds have passed, hold down the device’s Power button until a reboot is initiated. and then give up if a successful boot fails to occur.

    Escape routes for unsuccessful/unsatisfactory installations:

      Magisk Module Installation:

    • If booted, navigate to /magisk using a capable file manager application and delete /dolbyatmos before rebooting the device. If experiencing an unsuccessful device boot, boot to recovery using the appropriate hardware button combination for the device, install the Magisk Recovery Management archive attached below, and follow the given instructions to delete the Magisk module (/magisk/dolbyatmos).
    Читайте также:  Стикеры лица для андроид

    • SuperSU /system installations:

        Restore Backup in recovery if available: TWRP > Restore > appropriate backup folder > Check System > Swipe to perform Restore operation

    • Install the currently installed rom zip in recovery without any partition wipes or install a different rom zip according to the rom developer’s installation instructions.
    • An acceptable report will include the /sdcard/recovery.log received after the installation session before booting from recovery even if the recovery session appeared to be free from any error. An acceptable report will include relevant information/details to equip me to efficiently address the report.

      Assessing the installation is encouraged for all users and is especially helpful when the collected information is included in reports of less than perfect experiences.

      The dumpsys utility in Android can be a very valuable troubleshooting tool, especially audio output processing related issues, when targeting the audioflinger service. Recommended terminal applications include Terminal Emulator for Android and Termux.

    In Android Terminal:

    The output generated upon tapping the Enter key is the information of interest and can be copied from the Terminal and pasted with a report, if necessary.

  • This output includes the list of successfully configured audio sound effect libraries and any successfully created effect-chains from one or more of those libraries when combined with the successful installation of an appropriate apk, Dolby Atmos being one of many examples.
  • Logging:

      The log utility in Android is another valuable tool for many various purposes, including troubleshooting. This utility is most convenient when used with a logging application such as Matlog in order to utilize features such as word filtering and syntax highlighting among others.

  • Using the logging application’s search feature, the user can filter the displayed log output using words or characters relevant to this Dolby Atmos™ port such as: dolby, dax, dlb, dseffect and include that relevant log output with reports, if necessary.
    • The possibility of my experience being different from others’ experiences is always present!

  • Those meeting the installation requirements may certainly test against various aspects stated as facts within this OP such as incompatibility with other audio effects, requirement of Permissive SELinux Mode :highfive:, etc.
    • The installation, as with any device content, is not immune to impact from existing and future installations of custom content. This custom content may remove or modify necessary content, or introduce conflicting content preventing Dolby Atmos™ from functioning as intended by this mod’s installation. Security measures can block these scenarios from occuring but will typically be implemented only after the discovery of such cases of «breaking» Dolby Atmos™ functionality, in which case, the relevant vulnerability will be omitted from this particular section.

    Источник

    Оцените статью