Драйвера для usb ethernet apple

Apple USB Ethernet Adapter — Windows Driver

Apple USB Ethernet Adapter Tech Specs

Easily connect your computer to an Ethernet network with the Apple USB Ethernet Adapter. Small and light, it connects to the USB 2.0 port of your Computer and provides an RJ45 connector that supports 10/100BASE-T performance.

USB 2.0, USB 1.0 and USB 1.1 compliant
Bus Powered
Support both Full-duplex and half-duplex IEEE 802.3 10Base-T and 100BASE-Tx Ethernet
Supports Suspend mode and Remote Wakeup via Link-up, Magic packet
External PHY loop-back diagnostic capability
Based on ASIX AX88772A USB to 10/100 Fast Ethernet/HomePNA controller
Embedded 20KB SRAM for Rx packet buffering and 8KB SRAM for Tx packet buffering
Operating temperature range: 0°C to 70°C
Built-in 4.6-inch USB cable

Download AX88772A driver corresponding to your Windows version from ASIX official website.
Extract driver files from downloaded package.
Place patch.bat in the same folder as AX88772.inf or NETAX88772.inf and run it.
Install patched driver.
- (Note: You may need to enable 3rd-party driver on Windows 8)

For your convenience, a patched version for Windows is included.

Источник

Download Apple USB Ethernet Adapter Drivers

You are running: unknown OS

Drivers found in our drivers database.

The release date of the drivers: 06 Dec 2021

See more information about Outbyte and unistall app.instrustions. Please review Outbyte EULA and app.privacy

Click “Download Now” to get the Drivers Update Tool that comes with the Apple USB Ethernet Adapter :componentName driver. The utility will automatically determine the right driver for your system as well as download and install the Apple USB Ethernet Adapter :componentName driver. Being an easy-to-use utility, The Drivers Update Tool is a great alternative to manual installation, which has been recognized by many computer experts and computer magazines. The tool contains only the latest versions of drivers provided by official manufacturers. It supports such operating systems as Windows 10, Windows 11, Windows 8 / 8.1, Windows 7 and Windows Vista (64/32 bit). To download and install the Apple USB Ethernet Adapter :componentName driver manually, select the right option from the list below.

Apple Apple USB Ethernet Adapter Drivers

Hardware Name: Apple USB Ethernet Adapter
Device type: Network cards	Manufactures: Apple
Driver Version: 3.10.3.10	Release Date: 01 Feb 2008	File Size: 1.7MB
System: Windows 7 64-bit, Windows 8 64-bit, Windows 8.1 64-bit
Hardware ID: USB\VID_05AC&PID_1402

Was this page helpful?

What percentage of users, installed Apple drivers?

93% installed a driver

What percent of users has not helped this article?

Источник

Is there an Apple USB Ethernet driver for Windows?

I recently needed an Ethernet adapter for my laptop, which has USB and WiFi (of course) but no Ethernet. Somebody offered me an Apple USB-to-Ethernet adapter. I figured Windows would offer the driver automatically, after which I could use the computer in places where only wired networks were available.

Well, I plugged it in, and no such luck! Windows 10 Enterprise x64 recognized the hardware, but said it couldn’t find a driver for it. I tried searching online (connected over Wi-Fi), and found a bunch of people referencing this page by somebody using the alias “Tnkgrl.” Unfortunately, the DropBox download link is no longer pointing to anything! I also searched Apple’s site, but couldn’t find any Windows drivers: Maybe they’re included in Bootcamp but not available for download?.

Anybody know how to get this device working in Windows?

4 Answers 4

I did a little more hunting online and found this link to a blog that said they’d found the driver for the chipset in the adapter, and convinced it to work. I followed a variant on their instructions, and it worked for me too. Here are the steps I used:

Plug in the adapter while the computer is running.
Check Device Manager (you can get there by right-clicking Start). You should see a listed Apple device with a little yellow exclamation mark next to it, saying Windows can’t load the driver.
Go to the website listed in the blog post and find the driver for your OS. I used this one for 64-bit Windows 10. Note that this is the actual driver download, not a Setup program.
Download the .ZIP file. If you use a browser that adds the «mark of the web» (IE or Edge for sure, maybe others), right-click the downloaded ZIP, go to Properties, click Unblock (either a button or checkbox), and hit OK.
Unpack the ZIP archive. You should see a folder containing four files: a .SYS file (the driver), a .CAT file (the WHQL signature), a .INF file (the driver information), and a Readme.txt. Don’t do anything with these files directly, but remember where they are.
Go back to Device Manager, right-click the device entry that needs the driver, and choose Update Driver Software. .
Choose Browse my computer for driver software .
Choose Let me pick from a list of device drivers on my computer .
If there’s a Have Disk. button in the lower right, click it. Otherwise, click the top entry in the list (should be something like «All devices») and hit OK, then click Have Disk. on the next screen.
In the box labeled «Copy manufacturer’s files from:», type in or browse to the location where you unpacked the .ZIP file, then hit OK.
Choose the option ASIX AX88772A USB2.0 to Fast Ethernet Adapter (on my system, it is the second option listed). Hit Next .
You will get an «Update Driver Warning» or similar saying that Windows can’t verify that the driver will work with your hardware, which may cause problems. Click «Yes» anyhow, for this and any other prompts to confirm that you want to install the driver.
You should now have a working Ethernet adapter! In Device Manager, it will be listed as a «ASIX AX88772A USB2.0 to Fast Ethernet Adapter» under the «Network adapters» category, and there should be no exclamation marks or anything like that.

There you go! You can connect to a wired network, and it should work fine. The original instructions were for Windows 8 x64, and I can verify that it works on Win10 x64; I haven’t tested it on other versions but the same steps should work and the download site lists drivers for tons of operating systems.

Источник

Apple USB Ethernet Adapter Drivers Download

Download the latest version of the Apple USB Ethernet Adapter driver for your computer’s operating system. All downloads available on this website have been scanned by the latest anti-virus software and are guaranteed to be virus and malware-free.

Find All Apple USB Ethernet Adapter Drivers

Updates PC Drivers Automatically
Identifies & Fixes Unknown Devices
Supports Windows 10, 8, 7, Vista, XP

Recent Help Articles

Popular Driver Updates for Apple USB Ethernet Adapter

If you have had recent power outages, viruses or other computer problems, it is likely that the drivers have become damaged. Browse the list above to find the driver that matches your hardware and operating system. To see more matches, use our custom driver search engine to find the exact driver.

Tech Tip: If you are having trouble deciding which is the right driver, try the Driver Update Utility for Apple USB Ethernet Adapter. It is a software utility that will find the right driver for you — automatically.

DriverGuide maintains an extensive archive of Windows drivers available for free download. We employ a team from around the world which adds hundreds of new drivers to our site every day.

How to Install Drivers

Once you download your new driver, then you need to install it. To install a driver in Windows, you will need to use a built-in utility called Device Manager. It allows you to see all of the devices recognized by your system, and the drivers associated with them.

Open Device Manager

In Windows 10 & Windows 8.1, right-click the Start menu and select Device Manager

In Windows 8, swipe up from the bottom, or right-click anywhere on the desktop and choose «All Apps» -> swipe or scroll right and choose «Control Panel» (under Windows System section) -> Hardware and Sound -> Device Manager

In Windows 7, click Start -> Control Panel -> Hardware and Sound -> Device Manager

In Windows Vista, click Start -> Control Panel -> System and Maintenance -> Device Manager

In Windows XP, click Start -> Control Panel -> Performance and Maintenance -> System -> Hardware tab -> Device Manager button

Install Drivers With Device Manager

Locate the device and model that is having the issue and double-click on it to open the Properties dialog box.

Select the Driver tab.

Click the Update Driver button and follow the instructions.

In most cases, you will need to reboot your computer in order for the driver update to take effect.

Visit our Driver Support Page for helpful step-by-step videos

Install Drivers Automatically

If you are having trouble finding the right driver, stop searching and fix driver problems faster with the Automatic Driver Update Utility. Automatic updates could save you hours of time.

The Driver Update Utility automatically finds, downloads and installs the right driver for your hardware and operating system. It will Update all of your drivers in just a few clicks, and even backup your drivers before making any changes.

Once you download and run the utility, it will scan for out-of-date or missing drivers:

When the scan is complete, the driver update utility will display a results page showing which drivers are missing or out-of-date:

Next, update individual drivers or all of the necessary drivers with one click.

Benefits of Updated Drivers

Many computer problems are caused by missing or outdated device drivers, especially in Windows 10. If your deskttop or laptop is running slow, or keeps crashing or hanging, there is a good chance that updating your drivers will fix the problem.

Ensures your hardware runs at peak performance.

Fixes bugs so your system will have fewer crashes.

Unlocks new features and configuration options in your devices, especially with video cards and gaming devices.

Источник

Драйвера для usb ethernet apple

Как заставить работать Apple USB Ethernet Adapter на Windows 8

7 Responses