- IPhone 6 LCD Display Light Solution Jumper Problem Ways
- iPhone 6 Plus Lcd Light Not Working Solution Display Light Ways Jumper
- iPhone 6 Plus Backlight Ways Display Light Jumpers Solution
- Problems
- Reasons of Problems
- Tools Required
- Hardware Solution
- MOBILE SOLUTION
- Recent
- How To iPhone-6-Plus-Lcd-Light Working-Solution
- Repair iPhone 6s Backlight Problem Display Light Ways
- Reasons of Problems
- Hardware Solution:
IPhone 6 LCD Display Light Solution Jumper Problem Ways
IPhone 6 LCD Display IC Solution Jumper Problem Waysion
Here’s the Apple IPhone 6 hardware solution for LCD Display lighting Problem. This problem may result to show a dark or black screen display for there is no illumination backlight LED on the back of the LCD screen.
Problem
Display light / Backlight not working.
Manual Solution
Check your phone brightness settings. (This is the only manual solution for this problem)
Hardware Solution
To fix the dark screen display problem, you may first try to replace or install a new Display screen module, to easily confirm if the LCD’s backlight LED’s were still working or already damaged.
You can also check the LED’s using the multimeter if you can manage without damaging the LCD flex connector.
If the newly installed LCD still shows the same problem and the LED light doesn’t light up, refer to the solution below and locate the highlighted components on the PCB board.
Solution By buds_guy
Trace also each connection line paths were it is being connected to a lighting section.
If any track line is missing just make a jumper.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
Apple IPhone 6 LCD Display IC Solution Jumper Problem Ways LCD Display Not Working
IPhone 6,LCD Display,Display Problem,Display Solution,Display Jumpers,Display Ways,White Display ,Blinking Display,Blank Display
Источник
iPhone 6 Plus Lcd Light Not Working Solution Display Light Ways Jumper
iPhone 6 Plus Lcd Light Not Working Solution Display Light Ways Jumper
iPhone 6 Plus Display Light Problem Repair Solution Ic Ways Jumper
Here’s solution for Apple iPhone 6 Plus in troubleshooting or repairing display light failure for both LCD and Display. The solution below shows the connection tracks of the iPhone 6 Plus light circuit connection. Just analyze how the connection flows and then you may get some hints where to start in troubleshooting.
Apple iPhone 6 Plus smartphone was launched in September 2014. The phone comes with a 5.50-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels at a PPI of 401 pixels per inch.
The Apple iPhone 6 Plus is powered by Apple A8 processor and it comes with 1GB of RAM. The phone packs 16GB of internal storage cannot be expanded. As far as the cameras are concerned, the Apple iPhone 6 Plus packs a 8-megapixel primary camera on the rear and a 1.2-megapixel front shooter for selfies.
If the newly installed LCD still shows the same problem, refer to the solution below and locate the highlighted components on the Samsung Galaxy S5 PCB motherboard. These components holds and control the Display LED backlights to work.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.
How to Make a Jumper in the Socket Display
Prepare a cable smooth and adjust the length that we will connect its tracks
Heat Tin with solder for attaching fine wires so that it will closely united.
Use a voltage tester to measure the jumper cables.
Tips & Warning
Make sure the jumper cables are connected properly so that it can deliver a good flow.
Make sure that the jumper cables are not connected directly with the other jumper cable.
The only hint of Mobilerdx on how to make a lane jumper socket on the Nokia 111. good luck
iPhone 6 Plus LCD Display IC Solution Jumper Problem Ways LCD Display Not Working
Источник
iPhone 6 Plus Backlight Ways Display Light Jumpers Solution
iPhone 6 Plus Backlight Ways Display Light Jumpers Solution
Apple iPhone 6 Plus Display Light Ways Jumper Lcd Light Not WOrking Problem Dim Low Light Repair Solution
iPhone 6 Plus Light Problem Repairing Solutions are available in the following article. Also, you will find Apple iPhone 6 Plus Led Not Working Ways and Jumpers information in the diagrams further in this post. If your cell phone is having one of these faults check these diagrams out and do the solutions step by step.
Problems
- Display light not working.
- The display light is dim.
- Sometimes display light works and sometimes it does not.
Reasons of Problems
- The phone might be water damaged.
- Dry soldering of display connector pins.
- Diode might be faulty.
- iPhone 6 Plus LCD screen might be faulty.
In iPhone 6 PlusLight Problem can occur because of the faulty Lights IC or it’s bad connection to the Cell Phone’s PCBA Motherboard. So first you should clean iPhone 6 PlusLight IC Ways and Motherboard of the Mobile Phone. You Can Use any cleaning liquid for this purpose like CTC or any other you prefer. If you are certain that the bad connection is not the reason for your Mobile Phone’s fault, then you can replace the Lights IC with a new one.
Tools Required
- Star screw driver.
- Plastic separation tool for separating iPhone 6 Plus LCD screen from the body.
- Heat gun.
- Soldering gun.
- Multi meter.
Hardware Solution
- Now check the connection between the diode and the first pin of display connector (on – board), if there is no continuity between 1 st pin of the display connector and diode then solder board pins and check.
- If the above step fails then it means that diode might be faulty or is disconnected from the board. In order to resolve that gently heat diode and check, if it is still found to be faulty then replace diode.
- If the above step fails in resolving this issue then it means your iPhone 6 Plus display screen is faulty and you need to change it.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Источник
MOBILE SOLUTION
Recent
How To iPhone-6-Plus-Lcd-Light Working-Solution
iPhone 6 Plus Lcd Ablaze Not Working Band-aid Affectation Ablaze Ways Jumper
iPhone 6 Plus Affectation Ablaze Botheration Repair Band-aid Ic Ways Jumper
Here’s band-aid for Apple iPhone 6 Plus in troubleshooting or acclimation affectation ablaze abortion for both LCD and Display. The band-aid beneath shows the affiliation advance of the iPhone 6 Plus ablaze ambit connection. Just assay how the affiliation flows and again you may get some hints area to alpha in troubleshooting.
Apple iPhone 6 Plus smartphone was launched in September 2014. The buzz comes with a 5.50-inch touchscreen affectation with a resolution of 1080 pixels by 1920 pixels at a PPI of 401 pixels per inch.
The Apple iPhone 6 Plus is powered by Apple A8 processor and it comes with 1GB of RAM. The buzz packs 16GB of centralized accumulator cannot be expanded. As far as the cameras are concerned, the Apple iPhone 6 Plus packs a 8-megapixel primary camera on the rear and a 1.2-megapixel advanced ballista for selfies.
If the anew installed LCD still shows the aforementioned problem, accredit to the band-aid beneath and locate the accent apparatus on the Samsung Galaxy S5 PCB motherboard. These apparatus holds and ascendancy the Affectation LED backlights to work.
iPhone-6-Plus-Lcd-Light-Not-Working-Solution-Display-Light-Ways-Jumper
How To Iphone 6 Plus Lcd Light Solution 100% Working
Iphone 6 Plus Display Light Jumper Solution
Источник
Repair iPhone 6s Backlight Problem Display Light Ways
Repair iPhone 6s Backlight Problem Display Light Ways
Apple iPhone 6s Display Ways White LCD Solution Blank Display Problem Backlight Jumper Display Problem Repair Solution
In this post solutions for IPhone 6s LCD Problem are available. So if your IPhone 6s LCD is not working diagrams in this article can help you solve that problem.
Display problems in phones are surely considered to be one of the worst ones, and this is because a person has to do something on immediate basis in order to overcome this problem, and the worst thing is that this is known to be one of the most expensive repairer solutions as compared to others.
Apple iPhone 6s smartphone was launched in September 2015. The phone comes with a 4.70-inch touchscreen display with a resolution of 750 pixels by 1334 pixels at a PPI of 326 pixels per inch. Apple iPhone 6s price in India starts from Rs. 31,114.
Apple iPhone 6s comes with 2GB of RAM. The phone packs 16GB of internal storage that cannot be expanded. As far as the cameras are concerned, the Apple iPhone 6s packs a 12-megapixel primary camera on the rear and a 5-megapixel front shooter for selfies.
The Apple iPhone 6s runs iOS 9 and is powered by a 1715mAh non removable battery. It measures 138.30 x 67.10 x 7.10 (height x width x thickness) and weighs 143.00 grams.
Reasons of Problems
LCD screen of IPhone 6s has gone through some sort of physical damage (most of the time this is the case of Display problems in IPhone 6s.
LCD screen of phone or the phone itself might have encountered any kind of water damage.
Software is outdated.
Display connector might be loose, causing any of the above-mentioned problems in your phone’s screens.
LCD might be faulty itself, and you need to change that in order to overcome this issue.
On-board connector might be water damaged or faulty.
Hardware Solution:

” Note: ensure that the LCd is okay or try replacing it before proceeding”
1. Check the LCD pin connector for possible damaged, resolder if necessary.
2. Trace each of the LED + (positive and LED – (negative connection line paths down to the resistors where it is being connected.
3. Check the connected resistor, replace if found damaged.
4. Check the volts battery voltage (VBAT) across the inductor coil, check also the coil for possible open circuit.
5. If the voltage reading is okay and the coil is good. Replace the the LED driver IC
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Apple iPhone 6s LCD Display Light,Display Light Problem,Display Light Solution,Display Light Jumpers,IPhone 6s Display Light Ways,White Display ,Blinking Display,Blank Display Problem
Источник