Iphone all sounds gone

How to Fix No Sound on Your iPhone

Has your iPhone gone silent? Follow these tips to turn on the sound

When you don’t hear any sound on your iPhone, there are several steps you can take to fix the problem. Follow these 13 troubleshooting steps when there’s no sound on your iPhone.

Causes of No Sound on iPhone

The issue may be universal throughout your iPhone, or it may only occur within a single app. The precise issue will likely reveal itself with the corresponding fix. Follow these steps, in order, to remedy the problem and identify its root cause.

How to Fix No Sound on iPhone

Follow these steps in the order presented to get your iPhone working properly again.

Instructions in this article apply to iPhones with iOS 12 or later, but most of these fixes work on earlier versions.

Test the iPhone speaker. Select Settings > Sounds & Haptics. Under Ringers and Alerts, move the slider to the right to increase the volume. If you hear a sound, the iPhone speaker works. If you don’t hear a sound, the device may need a hardware repair.

Unsilence calls on your iPhone. The Ring/Silent switch, also called the Mute switch, has two positions. When the switch is pushed toward the back of the device, the color orange indicates that the switch is set to silent mode. Push the switch toward the screen to enable sound.

Turn off Do Not Disturb. Do Not Disturb mode silences many sounds and alerts. Turn it off if you don’t hear any sound. Open the Settings app, select Do Not Disturb, then move the toggle switch to the Off position.

Disable Bluetooth. When your iPhone is connected to a Bluetooth audio device, it sends sound to the device and not to the speaker on the iPhone. Turn off Bluetooth so that sounds play from the iPhone.

Adjust the volume buttons while in an app. Sometimes the sound volume in an app may be turned down too low to hear. Open an app, such as Music, Podcasts, or any other app that uses sound. Use the hardware volume buttons on the side of the iPhone to turn up the volume.

It may also be that the sound setting in the app is too low. Open the app and navigate to the page with the Play/Pause button. Move the slider to the right to increase the volume.

Check third-party app sound settings. Many third-party apps offer customized volume and mute sound settings. For example, some games offer separate settings for volume, music, sound effects, ambient audio, and more.

In the app, look for audio or sound settings. Turn off any customized mute options, enable audio, and adjust the volume sliders to increase volume. Depending on the app, either move sliders up, move sliders to the right, or tap an icon to make it active.

Check notification settings for the app. Check the iPhone notifications’ sound settings for the app. Some apps, such as Reminders and Messages, let you choose a notification sound. If this sound is set to None, the alert is silent. Choose None and select a sound.

Try headphones. Find the headphones that came with the iPhone. For older iPhone models, plug the headphones into the headset port. For newer iPhone models, plug the headphone into the Lightning port. (The charging cable also connects to this port.) Listen for audio with the headphones while using an app that has audio.

Alternatively, plug in and then remove the headphones, then listen for audio. It could be the iPhone is stuck in headphone mode.

Restart the device. If you still don’t hear any sound, restart the iPhone. To restart, turn the iPhone off and then back on.

Make sure iPhone apps are up to date. In rare cases, the lack of sound may be the result of an app developer error. Go to App Store > Updates to check if an app update is available. If you see only apps in the Updated Recently section, no additional updates are available.

Читайте также:  Скрины плохого качества айфон

Check for iOS system updates. An iOS update might fix a sound problem. Check for any system software updates from Apple, then download and install the available updates.

Reset all settings. If none of the above steps resolve your sound issue, reset the iPhone settings. This resets the sound, display, and network settings to the iPhone defaults. Go to Settings > General > Reset > Reset All Settings.

Contact Apple Support or make an appointment at an Apple Genius Bar. If none of the above steps works, you may have a hardware problem. Whatever the issue, your only course is to contact Apple.

Источник

If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker

If you can’t hear a person’s voice clearly, hear crackling, hear static, or have issues with sound quality, learn what to do.

Check your sound settings

If your device has a Ring/Silent switch, move the switch forward—toward the device’s display—so that orange isn’t showing. If you’re using an iPad, you can also swipe down from the top-right corner to view Control Center and make sure that Silent Mode is off.

Open Settings > Focus > Do Not Disturb and make sure that Do Not Disturb is off.

Clean your receivers and speakers

Remove all screen protectors, films, or cases from your device. Check the speaker opening to see if it’s blocked or dirty. On iPhone only, make sure that the receiver is not blocked or dirty. If necessary, clean the speaker or receiver opening with a small, soft-bristled brush. Make sure that the brush is clean and dry.

Check the sound on your device

Go to Settings > Sounds (or Settings > Sounds & Haptics), and drag the Ringer and Alerts slider back and forth a few times. If you don’t hear any sound, or if your speaker button on the Ringer and Alerts slider is dimmed, your speaker might need service. Contact Apple Support for iPhone, iPad, or iPod touch.

Try making a call

If you hear sound, try making a call with your iPhone and turn on speakerphone. On iPad or iPod touch, make a FaceTime call. If you still can’t hear, or hear static or crackling, then your network or reception could be the issue. Try to call again later, or from a different location.

FaceTime isn’t available in all countries or regions.

Источник

Question: Q: How to change notification sounds on iPhone

Is there a way to change notification sound for apps other than system apps such Mail, Text or Facebook etc. Because my iPhone by default plays Tri-Tone sound for all my push notifications from third party apps! And it’s very hard to know from the notification as they all have the same sound. Help!

​[Re-Titled by Moderator]

Posted on Jan 23, 2017 2:34 PM

Helpful answers

That is not even close to what the person wanted. We don’t want to turn the notification sound on and off, we want to make it play a different sound for different apps. There is no way to do that in Settings > Sounds. There used to be a way to set different sounds for different apps.

May 27, 2017 9:34 PM

What kind of dumb answer is that? But no, iOS is so **** locked down you can’t even change notification sound for every app, thought something like this would be added in iOS 11 but still the same locked OS. Why is Apple so scared of customization.

Jun 10, 2017 3:04 AM

This does not give me an option for different sounds. Just that I can turn it on and off. So I guess I have the same notification sound for a lot of my apps or can I customize this?

May 2, 2017 9:15 AM

Yeah, this is nuts. I have the same notification sound for LinkedIn, Twitter, (and many others) as I do when my gate opens. My dogs lose it when they hear it so it’s become entirely inconvenient. Apple should easily listen to its’ customers and allow for custom notification sounds the same way phone numbers can have custom ringtones. What’s the problem, Apple?

Nov 21, 2017 11:14 AM

Pathetic. Samsung Galaxy here I come asap. Apple have lost the plot.

Oct 4, 2017 4:21 AM

I see that you’re looking to customize your notification sounds for third party apps. I can see why you’d want it set up this way; that does sound very convenient.

Take a look at the following information, particularly the portion at the bottom that mentions «Sounds».

Change alert styles and settings for notifications

Customize your notifications with different alert styles so you can act quickly on emails, calendar invites, messages, and more. To add or change an alert style for a notification, go to Settings > Notifications and select an app.

Notifications from apps can have these alerts styles:

  • Banners: Banner alerts appear at the top of the screen and go away automatically. To reply, swipe down on the banner or swipe up to dismiss it. If you have an iPhone 6s or later, you can respond to a banner alert with 3D Touch. Just press deeply on a banner alert to respond.
  • Alerts: With Alerts, you need to act before you can move on. Depending on the app, you can dismiss the alert or reply to it.
  • Badges: A Badge is the red number that appears on an app icon and shows you how many notifications you have for that app.
  • Sounds: Have an app play a sound to alert you when you receive a notification.
Читайте также:  Idmsa apple com возврат средств

Источник

Question: Q: My new iPhone 6plus suddenly has no sound

All sound is gone. I’ve tried everything anyone with a fix?

Posted on Oct 1, 2014 2:24 PM

Helpful answers

I have the same issue with Marcibro. my iphone 6 plus suddenly have no sound. i tried to press to the volume button but the word appeared on the screen was headphones even i didn’t put the headphones in. the sound just work with the headphones only. that can’t speaker. Can you please help me? thanks

Aug 10, 2015 6:43 AM

By «All sound it gone» it sounds like there are no alert sounds, no music, no phone receiver sound.

Not sure if «tried everything» includes all the steps in this article, but see if there is something else to try. Although the new phones aren’t mentioned, the troubleshooting still applies.

  1. 1.Verify that the volume is set to a level you would normally be able to hear.
  2. Ensure that there is nothing plugged in to the headset jack or the dock connector.
  3. If the iPhone is in a protective case, make sure that the speaker port isn’t blocked by the case.
  4. Make sure that the speaker and dock port aren’t clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
  5. If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
  6. If the iPhone is paired with a Bluetooth headset or car kit:
    • Try turning off Bluetooth.
    • If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps .
  7. Restart the iPhone .
  8. If restarting doesn’t fix the issue, ensure that your iPhone is updated to the latest version of iOS .
  9. If the issue is not resolved, please contact Apple Support .

Источник

Low Call Volume on iPhone X, iPhone 8, iPhone 8 Plus Earpiece quiet Speaker muffled issues

Last Updated on Oct 12, 2021

Are you hardly hear on iPhone 8? Don’t worry, and I’m happy to help you with my free tutorial guide. Let’s fix Low Call Volume on iPhone X, Low Call Volume on iPhone 8 [Plus], Low Call Volume on iPhone 8 Plus using standard call, Speaker call. Our iPhone 8, iPhone 8 Plus, iPhone X after iOS 15 Update readers are reporting serious sound problems to us via email or comment. Here I guide where the problem is and how to minimize it using the best possible solutions. Your iPhone 8 or iPhone 8 Plus, iPhone X is sounding “static noise” or “crackling noise” or “Sounding low” in the earpiece. are you landing on this page for your incoming Call Sound problem on iPhone Xs, iPhone Xs Max, iPhone XR? Follow the steps that given here to fix out.

we are happy to help you, submit this Form, if your solution is not covered in this article.

It’s annoying to listen Static sound comes in the ear during the call. Shortly iPhone 8 and 8 Plus users using their device on speaker mode to bypass this unclear call volume. I think it’s not software issues, but somewhere done in old iPhone models and quickly fixed using some sound settings.

Let’s follow this guide and terminate your problem in our ways,

Get Fixed Problems on iPhone 8, iPhone 8 Plus, iPhone X Sound Problem, and Low Call Volume

NoteNo Call Volume, Are you testing on Unboxing iPhone X, iPhone 8, iPhone 8 Plus device, First Check and remove the plastic paper from the screen. [Double check this, it any layers on the Speaker or screen] this is the part of the packaging.

Solution 1: Increase Call Volume, not Ringer volume

How do I turn up the call volume on my iPhone 8? We can increase Call Volume only during calls running on the iPhone screen. Press and hold on the left Side volume up physical switch for increasing volume and Press and hold the Volume down button to decrease call volume on iPhone Speaker, Earpiece, or headphone.

  • Update iOS to latest version from the settings (Open Settings App> Tap General > Tap Software Update (currently latest software is iOS 15 (iOS 15.0.2)or later))
  • Also, Turn off Bluetooth that prevent from auto-connect Bluetooth headphone. (Settings > Bluetooth > Turn off Bluetooth Toggle)

Solution 2: Enable Phone Noise Cancellation

  • Go to the Settings app on the iPhone.
  • Tap Accessibility.
  • Click on Audio/Visual.
  • Now turn Phone Noise Cancellation toggle enable/Green.

This setting auto filters and Reduce ambient noise on phone calls when you are holding the receiver to your ear.

Solution 3: Audio Call Routing Set to Automatic & Turn off Bluetooth

If you set audio or FaceTime call always uses on Bluetooth headset and trying to listen to the speaker, then it will not work.

  • Open the Settings Appthat looks like a gear icon on the phone home screen.
    • Scroll the phone screen, click onAccessibility.
    • Now Tap on theTouchoption,
    • Click onCall Audio Routing.
    • ChooseAutomatic.

No Sound on Phone Call: Turn off Bluetooth under the settings,

  • Open the Settings App.
  • Tap Bluetooth.
  • Turn off/Disable Bluetooth.

Might be a Bluetooth headset connected automatically at your office or home.

Читайте также:  Тесты по промышленной безопасности для айфона

Solution 4: Are you using MFi Hearing Aids?

Apple made iPhone 8, 8 Plus, iPhone X for every person in the world, So blind people can customize settings for sound under this option. Check it is set up correctly and paired with Hearing devices.

  • Go to the Settings.
  • Tap Accessibility.
  • Tap Hearing Devices.
  • Enable and Reconnect the device.

Solution 5: Clean Speaker on iPhone Using Brush to fix iPhone 8 plus ear speaker volume low

Clean up the Speaker grill mesh using Soft Toothbrush or Blow upon the speaker grill to Clean the speaker softly. Also, check and test sound periodically after clean. A thin and Soft Toothbrush easily removes dust or Liquid in the small air.

Solution 6: Turn Off Reduce Loud Sound/Volume Limit For Headphone on iOS

Reduce Loud Sound option on iPhone will apply the volume limit to output audio devices like AirPods or Bluetooth earbuds. This option will help to prevent hearing loss, By adjusting the Output volume to decibel level (75 decibels to 100 Decibels).

  1. Open the Settings app on the iPhone. Now, Scroll to the Sounds & Haptics option.

Solution 7: Reset All Settings to the Default Settings

My iPhone 8 call volume was low all of a sudden. Try to Reset All settings option on the iPhone will not erase the user data but only remove iPhone system settings that we can customize after that easily. This option also helps to fix an internal software glitch that doesn’t compatible with the Earpeace speaker.

Steps to Reset All Settings for iOS 15 & later version:-

  1. Head to settings app on iPhone.
  2. Tap on General > Scroll to Transfer or Reset iPhone.
  3. Tap on Reset >Reset All Settings.
  4. That’s it.

iOS 14 & Earlier:-

  1. Open the Settings App
  2. Tap General
  3. Hit on Reset
  4. Tap Reset All Settings.

During reset the settings, your iPhone will reboot once. Now, Test and Check hope you fixed it.

Still, the Solution quality is low, Then try to Erase all content and Settings, Before that Backup iPhone, Because in this process whole iPhone will erase first. After the problem is fixed we can restore the backup. Follow the below steps for Erase All Content and Settings.

  1. Open the Settings app on the iPhone.
  2. Scroll to General and Tap on it.
  3. Now, Scroll to last on-screen and Tap on the Transfer or Reset iPhone/ Reset option.

Next to Reset, Tap on Erase All Content and Settings option. Enter the passcode to verify. After that, your iPhone will erase soon and Reboot once. So, Don’t interrupt the process. Once you see your iPhone welcome screen, set it up like a new Phone and Do a Call test.

Once you fixed your problem, Restore from Backup on iPhone is called Restore iPhone.

Solution 8: Speaker Damage and Hardware issues

Recently, Apple confirms some effects on new models, which might be happening with your iPhone 8, 8 Plus. Contact the nearest apple support or Book a Genius bar appointment and discuss on the apple help desk via online chat or at the nearest apple store (Genius bar).

Might be your iPhone hanging during the call

Based on my personal experience, I got disturbed while making the call and Restoring my iPhone itself (Photos album disappeared after update and process in restore on photos app). Also, check or test your iPhone 8/ 8 Plus running smoothly and as expected by opening some apps for the test.

iPhone 8 volume low when playing music

if you ever facing an issue like your iPhone volume goes down when you playing music? Don’t worry

Open Settings App > Tap “Sounds & Haptics” or “Sounds” > Now tap on “Headphone Audio” section, Choose “Headphone Safety”

Please Make sure the toggle for “Reduce Loud Sounds” is disabled.

If it is an On/Green color, then turn it toggle off by swiping the button to the left side.

iPhone 8 (Plus) Bluetooth volume low in car Spotify

Let’s follow this article’s step-by-step guide to fix low Bluetooth volume in-car music.

Try to Hard Reboot iPhone 8, 8 Plus, or “iPhone X”

Internal software issues we can immediately fix without change the settings in most of the case. To Hard Restart or Reboot,

1: Press and Quickly Release Volume Up button,
2: Press and Quickly Release Volume Down Button,
3: Press and hold the Side Button until you see the Apple logo on Screen.

To Start the iPhone, Again press the Side button until the startup apple logo is on the screen.

Next, press the Power button until the wakeup screen with the apple logo, Now test with a sample call.

if your iPhone phone call volume is very low, not solve, you should book a Genius Bar appointment. learn here how to make a genius bar reservation.

Above all solutions are beneficial for fix Low Call Volume on iPhone X, iPhone 8, iPhone 8 Plus Sound Problem DIY. Ready to share and comment on the below for more help from us.

jaysukh patel

Jaysukh Patel is the founder of howtoisolve. Also self Professional Developer, Techno lover mainly for iPhone, iPad, iPod Touch and iOS, Jaysukh is one of responsible person in his family. Contact On: [email protected] [OR] [email protected]

Источник

Оцените статью