Гитарно-музыкальный исторический журнал
Приложение работает с 64-битными устройствами, то есть с айфонами не ниже 5S и айпадами не ниже Air и Mini-2, и распространяется абсолютно бесплатно, то есть на халяву. Работает программа очень шустро, можно сказать, просто летает. Даже при использовании аналогового айрига, задержка практически не ощущается, к тому же, настраиваемый размер буфера, позволяет оптимально выстроить баланс между производительностью и оптимальным откликом. Стоит отметить ещё один настраиваемый параметр – управление. Вы можете выбрать, как ручки будут реагировать на ваши свайпы, то есть управляться движением пальца вверх-вниз, или поворотным. И хотя работают оба способа, предпочтение отдаётся распознаванию того, который вы выберете в настройках.
GE Labs обладает практически всеми возможностями флагманского процессора GE300, за исключением синтезатора, лупера, драм машины (к слову, сказать, в трёхсотке её тоже нет, но есть в младших моделях) и педали экспрессии.
Интерфейс программы поддерживает три языка: английский, японский и оба китайских (традиционный и упрощённый). В оформлении что-то позаимствовали у IK Multimedia, а что-то у Positive Grid. Входной буфер оборудован нойзгейтом, а выходная секция – глобальным эквалайзером, лимитером, а также возможностью глобального отключения кабинетулятора и эмуляции оконечника (усилителя мощности). На борту имеются хроматический тюнер и метроном.
Mooer GE Labs
Вслед за гитарными процессорами GE, Mooer выпустил свою собственную амплитюбу для айОса, и стоит отметить, довольно неплохую, способную составить конкуренцию приложениям JamUp, Bias FX, Amplitube, Ampkit и иже с ними, а кое в чём и даже превосходит.
Тракт обработки звука состоит из секции преампа, оконечника, кабинета с двумя виртуальными микрофонами, а также неограниченного числа эффектов, причём, вы можете менять элементы цепочки в любом порядке, хоть через жопу, поставив сперва кабинет, затем оконечник, после преамп, а вокруг и между ними напихать эффектов. Что же касается эмуляции микрофонов, вы можете перемещать их в трёхмерном пространстве, регулируя не только их положение относительно динамика, но и расстояние между микрофоном и кабинетом.
GE Labs бесплатно предлагает набор из более, чем сорока преампов, дюжины оконечников, более сорока кабинетов, дюжины моделей микрофонов (можно одновременно можно использовать два, причём хоть одинаковых), а также просто немерянного количества примочек, среди которых чего только нет. И компрессора, и вау-автовау, и модуляторы, и питчшифтеры, и ревера, и дилеи, всё о чём только может мечтать гитарист.
Как я уже упомянул, количество эффектов, одновременно используемых в цепи, ограничено только вашей фантазией, их можно использовать сколько угодно, а вот преамп, оконечник и кабинет можно использовать только по одному, хотя есть одна хитрость, о которой я расскажу позже.
Переключение пресетов осуществляется любым MIDI-контроллером, совместимыми с ай-девайсами, или встроенным виртуальным контроллером, верхний ряд кнопок которого по одному включает/выключает эффекты, а нижний переключает пресеты. Ещё две боковых кнопки листают банки с пресетами вверх-вниз. Вот тут-то есть одна заковыка. Бесплатно, приложение не позволяет сохранять пользовательские пресеты. Но эта возможность открывается, если купить одну, несколько или бесконечное число ячеек для пользовательских пресетов. Стоит это недорого. И это единственное, за что производитель просит деньги. Заводские пресеты все бесплатные, равно как и все примочки, преампы, усилки, кабинеты и микрофоны.
Но это всё фигня по сравнению с самой главной фишкой этого приложения, которой нет ни у амплитюбы, ни у позитив грид (у Bias эта функция доступна только в десктопной версии для мака или винды), ни у кого другого.
GE Labs обладает функцией Tone Capture, то есть тон-матчинга! Вы можете засэмплировать образ любой примочки-дисторшн, преампа, усилителя/комбика или акустического кабинета, а также обмениваться сэмплами с другими пользователями через облачный сервис. Эдакий карманный кемпер, причём совершенно бесплатный! Одной этой функции достаточно для мотивации покупки айфона или айпада. И только благодаря ей, я наконец-то решился на смену моего давно устаревшего iPad 2, прекрасно работающего с Bias Amp и Jam Up, на более современную модель.
Кстати, благодаря Tone Capture и облаку, в программе обнаружился один баг, который можно рассматривать как фичу. Как я уже упоминал выше, Программа позволяет использовать не более одного преампа, оконечника и кабинета одновременно. Однако это касается только заводских. Вы можете выстроить цепочку из неограниченного количества сэмплированных или облачных усилков, кабинетов и преампов, причём использовать их в любом месте цепочки. Правда всё это имеет тенденцию заводиться при чрезмерном злоупотреблении, но кого-то, возможно, это не испугает.
Какие я могу отметить недостатки у данного приложения…
Первое, чего мне не хватает, это виртуального аукса, для игры с файлами минусовок или других аудио-трэков. Надеюсь, производитель задумается над этим, и добавит столь нужную опцию в будущих версиях программы. Не помешал бы и рекордер, а ещё лучше – секвенсор. Ну и возможно какие-нибудь ещё ништяки, вроде драм-машины, виртуального аккомпаниатора и т.д. Раздражает сильно шумный и микрофонящий сам процесс тон-матчинга. Ну и батарею он жрёт очень даже нещадно. Но в целом, я доволен программой как удав, сожравший телёнка. И вам её рекомендую. Тем более что это бесплатно.
Источник
Mooer ge labs android
Following the full release of the GE series multi-effects pedal lineup, the MOOER team brings a brand-new mobile experience with GE Labs.
With GE Labs and a compatible audio interface, 171 amp models and stompboxes as well as MOOER’s proprietary MNRS (MOOER Non-linear Response Sample) technology can all be accessed from your iOS or iPad OS device. Users can sample any tone from their real-life amps, cabs, and overdrive pedals with GE Labs via MNRS Engine 2.0 and export them in to their GE series multi-effects pedals!
Users can upload/download preset patches from MOOER Cloud. MNRS Project allows users to upload and download the sample files from www.mooerstudio.com directly and export the files to their GE series pedals to enjoy. (Please visit MOOER STUDIO website for compatible products)
Support for iOS/iPad OS compatible audio interfaces, MIDI controllers. It can be used to control effects parameters and switch presets during live performance.
Источник
Requirement: Windows Win7/Win8/Win10
MacOS: Support MacOS 10.10 to MacOS10.15.
OCT 28th 2019, Mac V1.2.1, fix the compatibility of Mac 10.15
For more introduction videos and tutorial videos,
please follow MOOER AUDIO official YouTube Channel.
1. New Intelligent Harmony effect has been added to the FXA module. (For best results, please place the harmony effect after distortion/overdrive effects in order to get a more distinctive and clear tone. This effect is designed for single-note melodic lines and may not produce the best results with chordal patterns. We always recommend checking the guitar tuning before playing for to achieve best results!
2. 60’s Vibe effect has been added to the FXB module.
3. The maximum length of AMP and CAB names have been increased to 31 characters. If the file name is longer than 18 characters, the name of the current file will be shown as a rolling title from left to right.
4. Users can customize the name of their CTRL footswitches with a maximum of six characters for each name.
5. The name of the currently selected preset will be shown while accessing the SAVE menu.
6. Additional access options for the LOOPER and TUNER. Users can choose between pressing and holding both footswitches simultaneously or simply pressing both footswitches simultaneously.
7. Fixed a bug related to the Linear/Exponential modes of the volume expression pedal to ensure this function works as intended.
Notice: The firmware update will clear all user data from your GE300. Please backup your data before updating the firmware.
1. Added support for. GNR and .GIR sample files allowing GE Labs and MOOER Studio users to import these files to their GE300.
2. Increased number of load slots for AMP (.GNR) sample files, for a total of 50.*
3. Improved the microphone model in the CAB module.
4. Optimized the 2048-point sampling algorithm in the CAB module. Some conditions are limited. The default CAB sample is 2048 points and the POINT selection of the CAB module has been removed.
5. Brand-new“parameter preferencemenu. It offers two parameter adjustment modes. Users can access them from the PARA PREF menu.
6. Additional control footswitch mode has been added. There are now three footswitch control modes.
In FS mode 3, from the bank select page, you can access 8 preset patches via A, B, C, D and CTRL1, CTRL2, CTRL3, CTRL4.
Press a footswitch to select a preset patch. Press current preset patch footswitch again to access CTRL mode. You can use those 8 footswitches as 8 seperate CTRL footswitches.
Press Band Up/Down footswitch to back to preset select page.
Fix bugs in B2.0.0
1. Fix the bug of input level display
2. Fixed bug regarding low output level caused by the microphone model.
3. Fixed bug with REAMP mode related to not being able to adjust the mix rate of wet/dry signal.
4. Fix the bug of the silent sample file.
5. In the “PARA PREF” menu, set the “Default” option as the default setting.
6. Deleted the sample point display in the CAB module.
7. Fixed the bug of expression pedal (In the previous version, users need to calibrate the expression every time after the factory reset.)
GE300 Editor Software Update Notes:
1. Added new amp sample file type support (.GNR).
2. Added new cab sample file type support (.GIR).
3. Users can now quickly backup and restore presets.
4. Fixed a bug related to loading 32-bit IR files.
5. Fixed a bug that prevented users from renaming TONE CAPTURE files.
Notice:
1. This firmware update will reset all data. Please backup presets before updating!
2. *After this update, the boot time of the GE300will increase depending on the number of loaded sample files. (Boot-up time of 50 loaded sample files will be approximately 26 seconds.)
3. The Return module cannot be placed before the Synth module.
4. Microphone models have been changed. This may affect the tone of older preset files so please check and make adjustments if necessary.
5. Parameter preferences (PARA PREF) is set to“Default”as the factory setting. You can toggle these preferences between «Default» and «Maintain». Please see user manual for more information
GE300 B2.0.0
1. Added support for .GNR and .GIR sample files, allowing GE Labs and MOOER Studio users to import these files to their GE300.
2. Increased number of loading slots for Cab (.GNR) files to 50.
3. Improved the microphone model in the CAB module.
4. Optimized the 2048-point sampling algorithm in the CAB module. Some conditions are limited. The default CAB sample is 2048 points, and the POINT selection of the CAB module has been removed.
5. Brand-new “parameter preference” menu. It offers two parameter adjustment modes. Users can access them in the PARA PREF menu.
Default: When switching effect to another in the same effects block, the parameters of the effect will be restored to the default settings.
Maintain: When switching effect to another in the same effects block, the parameters will stay the same and not reset to default for the new effect.
6. Additional control footswitch mode has also been added. There are now three footswitch control modes.
Notice: CAB SIM will sound slightly different after this update due to the bug fixing of the microphone model. The bass frequency will be slightly higher than before; the treble frequency will be slightly lower than before. You can adjust it manually according to your tonal preference.
GE300 V1.2.0
Notice
1.TONE CAPTURE files created in V1.1.0 cannot be supported in V1.2.0. This update will clear up all the TONE CAPTURE files in V1.1.0.
2.For V1.1.1, we recommend users backup your TONE CAPTURE files before the update. TONE CAPTURE files created in V1.1.1 will be accepted by the V1.2.0.
3.The update will not affect users’ presets, 3rd party IRs. However, we recommend you to back up your presets and IRs in case accidents happen.
1. Trail function is available now. When the Trail function is activated, the trail of delay or reverb effects will remain for few second after users switch patches or switch off the effects.
Delay effects support trail: Digital, Analog, Dynamic, Real, Tape, Mod, PingPong
Reverb effects support trail: Room, Hall, Plate, Fl-Reverb, Swell-Reverb, Spring, Mod
2. CTRL footswitch mode. The footswitch LED will change the brightness to indicate the current situation.
3. Fix the latency when changing presets, fix the pause when turning on/off effect blocks.
4. New alerts of importing preset with TONE CAPTURE files. When importing TONE CAPTURE presets, the TONE CAPTURE files already exist on the target patch, the alert will come up, select “Replace” to replace the TONE CAPTURE file; select “Save As” to select anther slot to import.
Update procedure :
* Download the software from www.mooeraudio.com, SUPPORT-DOWNLOADS.
* Unzip the file and install the software. We recommend not connecting the GE300 to your computer before the install finishes.
* Power off GE300, connect GE300 to computer after the software has installed successfully.
* Press and hold B + D footswitches simultaneously. Power on GE300, hold the B + D footswitches until it has booted to UPDATE mode.
* Open the software and click on START to start updating. It will take a few minutes to finish.
* After the update is done successfully, the GE300 will reboot automatically. The firmware version will be shown on the start screen. Then you can import those preset files to enjoy.
Источник