Please install apple application support quicktime что делать

Question: Q: Please install Apple Application Support

I need some help here because every time I try to open up iTunes or try to open up Quicktime I keep getting this annoying error message which states «Please install Apple Application Support.» As an alternative I can run my personal Quicktime movie files and iTunes music using Windows Media Player but when it comes to watching my purchased iTunes Movies or TV Shows its a NO GO most likely because they are encrypted and can only be authorized through a Apple product which puts me in a predicament of a) Not being able to watch my movie or TV purchases from iTunes, b) Not having the ability to access iTunes to purchase episodes of my favorite TV shows and movies when they become available. I’ve already gone to the Apple Support site and followed the instructions to completely uninstalled iTunes and Quicktime (In that order) and then reinstalled them (In that order) but I keep getting this same error message so If anyone can provide assistance ASAP I’d really. really. appreciate it.

Posted on Nov 22, 2014 9:44 PM

I have a 4TB external hard drive that I use not only to store my iTunes purchases but to handle backing up critical and important computer files. Thanks for your help I really appreciate it.

Posted on Nov 24, 2014 10:20 PM

All replies

Loading page content

Page content loaded

The steps in the second box are a guide to removing everything related to iTunes (similar to those above) and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.

Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.

The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won’t install normally.

Nov 23, 2014 2:13 AM

turingtest2, thank you for your reply but I’ve already followed those instructions to the T uninstalling everything in the required order, deleting all of the iTunes and Quicktime system files so that I could do a clean install but unfortunately I am still having the same problem of receiving the same error message over and over and over again. It is really getting frustrating.

Nov 23, 2014 10:21 AM

Bump. Still need help on this.

Nov 24, 2014 9:51 AM

Try installing from an administrator account, or right-click and run the installer as Administrator. Try using the MS Install Fixit to force through the install. Disable AV while installing.

Nov 24, 2014 10:02 AM

Hey turingtest2, Just tried it and unfortunately nada. Wondering if I have to take extreme measures and wipe my computer clean and reinstall Windows 7 because I don’t know what I’m missing here.

Nov 24, 2014 5:47 PM

Can’t really answer that one for you, but make sure you’ve backed up everything in your user profile if you decide to go that way.

Nov 24, 2014 6:08 PM

I have a 4TB external hard drive that I use not only to store my iTunes purchases but to handle backing up critical and important computer files. Thanks for your help I really appreciate it.

Nov 24, 2014 10:20 PM

Question: Q: Please install Apple Application Support More Less

Источник

Question: Q: Error Message: «Please install Apple Application Support» after QT7 Install

I attempted to update my Quicktime 6 application to QT7, but the install stopped partway through. I uninstalled Quicktime completely, and started over with a download and clean install of Quicktime 7.6.7. When I try to run my newly installed QT7.6.7, I get an ErrorMessage box with «Quicktime Player» in the header, and «Please install Apple Application Support.» in the box.

Читайте также:  Какие айфоны можно заряжать без провода

What do I do now?

Intel PC, Windows XP, SP2, FIOS Network

Posted on Sep 2, 2010 8:46 PM

All replies

Loading page content

Page content loaded

Sep 3, 2010 9:09 PM

Yes, it does. However, when I tried to repair it/reinstall it from the Add/Remove Control Panel, the file AppleApplicationSupport.msi in my Docs and Settings directory is apparently not valid (corrupted or out of date, I imagine) for installation. So, I deleted the invalid .msi, and opened the QT install.exe with WinRAR, and installed just the AAS.msi. Now QT 6.7.6 works fine. I don’t use iTunes, but I assume that if I were to install it, that iTunes would also use the new AAS.msi also.

Thanks for heading me in the right direction!

Sep 4, 2010 3:02 PM

🙂 Excellent news, air. Glad you got things working again.

I don’t use iTunes, but I assume that if I were to install it, that iTunes would also use the new AAS.msi also.

It’s an interesting question as to which version of AAS you’ve got installed at the moment. In old copies of the QT 7.6.7 QuickTimeInstaller.exe, the AAS version was 1.3.0 (If my memory serves me correctly . I think the AAS version 1.3.1 only showed up in the Safari 5.0.1 SafariSetup.exe).

In more recent QT 7.6.7 installers, the version number might be the new AAS 1.3.2 that comes with the current iTunes 10.0.0.68 iTunesSetup.exe. (I haven’t checked a current version of the QuickTimeInstaller.exe to see if it contains an AAS 1.3.2.)

On XP, it’s possible to check your AAS version in Add/Remove Programs. Select the Apple Application Support entry and click the «Click here for support information» link. Does it show a 1.3.0 or a 1.3.2? (Or possibly even a 1.3.1?)

Sep 5, 2010 1:00 AM

I’ve installed iTunes 10, after successfully intstaling Quicktime (latest version 7.6.7) but I’m getting an error message when trying to start iTunes:

«Apple Application Support version 1.3.1 is installed, iTunes requires Apple Application Support version 1.3.2 or later.»

«Please uninstall iTunes, then install iTunes again.»

Ive tried uninstalling it and installing it again, but i keep getting the same error message everytime.

I’ve tried everything but at no avail. I had a clean reïnstall of my Win XP system just the day before. I’m running Agnitum Outpost Pro as a firewall, Norton Antivirus and Norton Utilities.. (all recent versions) and my Win XP operating system is completely updated.

Sep 6, 2010 5:22 AM

7 september 2010

For some reason (Firewall / Internet security programs?) the Apple iTunes installation program doesn’t install all the necessary components.
There is a way to manually unpack the installation program to it’s 6 different components and install each component one by one.
(Advantage: you don’t need to uninstall or deactivate your security programs)

Best thing to do is:

1) Download the iTunes installation program (directly from the Apple website
http://www.apple.com )to your desktop,
WITHOUT INSTALLING the iTunes application.

2) Download he WinRAR decompression/unpack utility (for example from:

and install it on your desktop for easy use.

3) Unpack the iTunes installation program, using WinRAR by rightclicking the
iTunes installation program and choose ‘Open with WinRAR’.
Don’t bother with the message from WinRAR about files beïng corrupt
(these are probably the unreadable ‘Apple Mac’ files).

4) You’l see that the original iTunes installation program consists of 6
different installation programs.

4 utility programs (necessary for iTunes to work correctly)

— Apple Application Support (Version: 1.3.2)
— Apple Software Update (Version: 2.1.2.120)
— Apple Mobile Device Support (Version: 3.2.0.47)
— Bonjour (Version: 2.0.3.0)

and 2 main programs

Copy these 6 programs to your desktop with WinRAR,
where they will appear unpacked.

5) Install each program one by one IN CORRECT ORDER:

— First the 4 utility programs, one by one.
— Following this, install QuickTime.
— Install iTunes as last.

6) Check the Windows installed programs list to see if they’re all installed.
You can check the versions of te programs by clicking the information toolbar
for each program.

Читайте также:  Как перевести язык айфона

Sep 7, 2010 12:52 AM

THIS SOLUTION WORKED FOR ME (I did not have to uninstall and reinstall QT or Itunes):

For those of you who have deployed Apple iTunes 9 or Apple QuickTime 7.6.4 and received the “Please Install Apple Application Support”, we have found a workaround that fixes this. Installing the Apple Application Support part of the product on affected machines will result in a working program. (AppleApplicationSupport.msi)

1. You can get the AppleApplicationSupport.msi by either:

a) Run a compression program such as WinRAR against the installer, extract AppleApplicationSupport.msi

b) Run the install application and leave the program idle at its menus. Navigate to your temporary director and look for a folder named IXPxxx.tmp (xxx is a random number). The MSI program will be located in that folder. Please note: You must leave the installer running. If you close the installer, it will delete the temporary directory.

2. Once you have the «AppleApplicationSupport.msi» file, double click on that file to run the program, and it will actually install it on your computer in the appropriate location.

3. Then double click the «AppleSoftwareUpdate» file, and it will update any updates necessary.

When I did this procedure, it not only corrected the Quicktime start-up issue, but it also fixed problems I was having with Adobe After Effects (this also fixed the output template module” error, and “QT will be disabled” errors I was receiving).

Sep 16, 2010 10:17 PM

I WAS HAVING THE SAME PROBLEM, AND THIS SOLUTION WORKED FOR ME — IT ALSO FIXED OTHER PROBLEMS WITH Software related to QT (i.e., Adobe After Effects).

I did not have to uninstall and reinstall QT or Itunes. Here is the fix:

For those of you who have deployed Apple iTunes 9 or Apple QuickTime 7.6.4 and received the “Please Install Apple Application Support”, we have found a workaround that fixes this. Installing the Apple Application Support part of the product on affected machines will result in a working program. (AppleApplicationSupport.msi)

1. You can get the AppleApplicationSupport.msi by either:

a) Run a compression program such as WinRAR against the installer, extract AppleApplicationSupport.msi

b) Run the install application and leave the program idle at its menus. Navigate to your temporary director and look for a folder named IXPxxx.tmp (xxx is a random number). The MSI program will be located in that folder. Please note: You must leave the installer running. If you close the installer, it will delete the temporary directory.

2. Once you have the «AppleApplicationSupport.msi» file, double click on that file to run the program, and it will actually install it on your computer in the appropriate location.

3. Then double click the «AppleSoftwareUpdate» file, and it will update any updates necessary.

When I did this procedure, it not only corrected the Quicktime start-up issue, but it also fixed problems I was having with Adobe After Effects (this also fixed the output template module” error, and “QT will be disabled” errors I was receiving).

Источник

Скачать AppleApplicationSupport.msi и устранить ошибки MSI

Последнее обновление: 07/01/2021 [Требуемое время для чтения: 3,5 мин.]

Файлы Microsoft Windows Installer Package, такие как AppleApplicationSupport.msi, считаются разновидностью файла FPX (Microsoft Windows Installer Package). Они соотносятся с расширением MSI, разработанным компанией ThinkSky для iTools 4.4.2.7.

Первый выпуск файла AppleApplicationSupport.msi в ОС Windows 10 состоялся 01/07/2016 в составе Apple QuickTime Player 7.7.9. Датой самого последнего выпуска файла для iTools 4.4.2.7 является 12/11/2018 [версия 4.4.2.7]. Файл AppleApplicationSupport.msi включен в iTools 4.4.2.7, CopyTrans Drivers Installer 2.048 и Apple QuickTime Player 7.7.9.

Продолжайте читать, чтобы найти загрузку правильной версии файла AppleApplicationSupport.msi (бесплатно), подробные сведения о файле и порядок устранения неполадок, возникших с файлом MSI.

Рекомендуемая загрузка: исправить ошибки реестра в WinThruster, связанные с AppleApplicationSupport.msi и (или) iTools.

Совместимость с Windows 10, 8, 7, Vista, XP и 2000

Средняя оценка пользователей

Обзор файла

Общие сведения ✻
Имя файла: AppleApplicationSupport.msi
Расширение файла: расширение MSI
Тип файла: Установщик
Описание: Microsoft Windows Installer Package
Тип MIME: image/vnd.fpx
Пользовательский рейтинг популярности:
Сведения о разработчике и ПО
Программа: iTools 4.4.2.7
Разработчик: ThinkSky
Программное обеспечение: iTools
Версия ПО: 4.4.2.7
Сведения о файле
Размер файла (байты): 48848896
Дата первоначального файла: 10/06/2019
Дата последнего файла: 11/09/2019
Информация о файле Описание
Размер файла: 47 MB
Дата и время изменения файла: 2019:11:09 15:35:49+00:00
Тип файла: FPX
Тип MIME: image/vnd.fpx

✻ Фрагменты данных файлов предоставлены участником Exiftool (Phil Harvey) и распространяются под лицензией Perl Artistic.

Что такое сообщения об ошибках AppleApplicationSupport.msi?

Общие ошибки выполнения AppleApplicationSupport.msi

Ошибки файла AppleApplicationSupport.msi часто возникают на этапе установки iTools, но также могут возникать во время работы программы. Эти типы ошибок MSI также известны как «ошибки выполнения», поскольку они возникают во время выполнения iTools. К числу наиболее распространенных ошибок выполнения AppleApplicationSupport.msi относятся:

  • Файл AppleApplicationSupport.msi не является допустимым установочным пакетом.
  • Не удается найти AppleApplicationSupport.msi.
  • Функция, которую вы пытаетесь использовать, находится на сетевом ресурсе, который недоступен. Нажмите «ОК», чтобы повторить попытку, или введите альтернативный путь к папке, содержащей установочный пакет AppleApplicationSupport.msi, в поле ниже.

Программа: C:\ProgramData\Apple\Installer Cache\AppleApplicationSupport 7.6\AppleApplicationSupport.msi

Среда выполнения получила запрос от этого приложения, чтобы прекратить его необычным способом.
Для получения дополнительной информации обратитесь в службу поддержки приложения.

В большинстве случаев причинами ошибок в MSI являются отсутствующие или поврежденные файлы. Файл AppleApplicationSupport.msi может отсутствовать из-за случайного удаления, быть удаленным другой программой как общий файл (общий с iTools) или быть удаленным в результате заражения вредоносным программным обеспечением. Кроме того, повреждение файла AppleApplicationSupport.msi может быть вызвано отключением питания при загрузке iTools, сбоем системы при загрузке или сохранении AppleApplicationSupport.msi, наличием плохих секторов на запоминающем устройстве (обычно это основной жесткий диск) или заражением вредоносным программным обеспечением. Таким образом, крайне важно, чтобы антивирус постоянно поддерживался в актуальном состоянии и регулярно проводил сканирование системы.

Как исправить ошибки AppleApplicationSupport.msi — 3-шаговое руководство (время выполнения:

Если вы столкнулись с одним из вышеуказанных сообщений об ошибке, выполните следующие действия по устранению неполадок, чтобы решить проблему AppleApplicationSupport.msi. Эти шаги по устранению неполадок перечислены в рекомендуемом порядке выполнения.

Шаг 1. Восстановите компьютер до последней точки восстановления, «моментального снимка» или образа резервной копии, которые предшествуют появлению ошибки.

Чтобы начать восстановление системы (Windows XP, Vista, 7, 8 и 10):

  1. Нажмите кнопку «Пуск» в Windows
  2. В поле поиска введите «Восстановление системы» и нажмите ENTER.
  3. В результатах поиска найдите и нажмите «Восстановление системы»
  4. Введите пароль администратора (при необходимости).
  5. Следуйте инструкциям мастера восстановления системы, чтобы выбрать соответствующую точку восстановления.
  6. Восстановите компьютер к этому образу резервной копии.

Если на этапе 1 не удается устранить ошибку AppleApplicationSupport.msi, перейдите к шагу 2 ниже.

Шаг 2. Если вы недавно установили приложение iTools (или схожее программное обеспечение), удалите его, затем попробуйте переустановить iTools.

Чтобы удалить программное обеспечение iTools, выполните следующие инструкции (Windows XP, Vista, 7, 8 и 10):

  1. Нажмите кнопку «Пуск» в Windows
  2. В поле поиска введите «Удалить» и нажмите ENTER.
  3. В результатах поиска найдите и нажмите «Установка и удаление программ»
  4. Найдите запись для iTools 4.4.2.7 и нажмите «Удалить»
  5. Следуйте указаниям по удалению.

После полного удаления приложения следует перезагрузить ПК и заново установить iTools.

Если на этапе 2 также не удается устранить ошибку AppleApplicationSupport.msi, перейдите к шагу 3 ниже.

Шаг 3. Выполните обновление Windows.

Когда первые два шага не устранили проблему, целесообразно запустить Центр обновления Windows. Во многих случаях возникновение сообщений об ошибках AppleApplicationSupport.msi может быть вызвано устаревшей операционной системой Windows. Чтобы запустить Центр обновления Windows, выполните следующие простые шаги:

  1. Нажмите кнопку «Пуск» в Windows
  2. В поле поиска введите «Обновить» и нажмите ENTER.
  3. В диалоговом окне Центра обновления Windows нажмите «Проверить наличие обновлений» (или аналогичную кнопку в зависимости от версии Windows)
  4. Если обновления доступны для загрузки, нажмите «Установить обновления».
  5. После завершения обновления следует перезагрузить ПК.

Если Центр обновления Windows не смог устранить сообщение об ошибке AppleApplicationSupport.msi, перейдите к следующему шагу. Обратите внимание, что этот последний шаг рекомендуется только для продвинутых пользователей ПК.

Если эти шаги не принесут результата: скачайте и замените файл AppleApplicationSupport.msi (внимание: для опытных пользователей)

Если ни один из предыдущих трех шагов по устранению неполадок не разрешил проблему, можно попробовать более агрессивный подход (примечание: не рекомендуется пользователям ПК начального уровня), загрузив и заменив соответствующую версию файла AppleApplicationSupport.msi. Мы храним полную базу данных файлов AppleApplicationSupport.msi со 100%-ной гарантией отсутствия вредоносного программного обеспечения для любой применимой версии iTools . Чтобы загрузить и правильно заменить файл, выполните следующие действия:

  1. Найдите версию операционной системы Windows в нижеприведенном списке «Загрузить файлы AppleApplicationSupport.msi».
  2. Нажмите соответствующую кнопку «Скачать», чтобы скачать версию файла Windows.
  3. Скопируйте этот файл в соответствующее расположение папки iTools:

Если этот последний шаг оказался безрезультативным и ошибка по-прежнему не устранена, единственно возможным вариантом остается выполнение чистой установки Windows 10.

Источник

Читайте также:  Все ли айфоны можно починить
Оцените статью