Press home to upgrade iphone что делать

Question: Q: iphone 8 stuck on press home to upgrade

Posted on Aug 25, 2018 8:04 AM

Helpful answers

My iPhone is stuck on the white screen and it’s press home to upgrade

Feb 7, 2019 12:41 PM

IPhone 8 was turning on and off repeatedly. I connected the iPhone to iTunes to upgrade the IOS version. Now the iPhone is stuck on “Press home to upgrade”

Feb 15, 2019 6:18 PM

I had this problem too. Just connect your phone to iTunes, then press the side button until it turnes off. The. Press the side button after it turns off and press the volume down button when the apple logo appears. Then select restore because update will just make it do the same thing again.

Mar 15, 2019 10:01 PM

There’s more to the conversation

Loading page content

Page content loaded

Thanks for using Apple Support Communities. I see from your post that you updated your iOS software using iTunes and you’re unable to complete the update.

You mentioned your iPhone 8 was restarting unexpectedly before you tried to update, which could be a factor. To help with a case like this, we have some great steps If you can’t update or restore your iPhone, iPad, or iPod touch

Put your device in recovery mode and set it up again

1. Make sure that you’re using the latest version of iTunes.
2. If iTunes is already open, close it. Connect your device to your computer and open iTunes. If you don’t have a computer, borrow one from a friend or go to an Apple Retail Store or Apple Authorized Service Provider for help.
3. While your device is connected, force restart it with these steps, but don’t release the buttons when you see the Apple logo, wait until the connect to iTunes screen appears:
   • On an iPhone X, iPhone 8, or iPhone 8 Plus: Press and quickly release the Volume Up button. Press and quickly release the Volume Down button. Then, press and hold the Side button until you see the connect to iTunes screen.
   • On an iPhone 7 or iPhone 7 Plus: Press and hold the Side and Volume Down buttons at the same time. Keep holding them until you see connect to iTunes screen.
   • On an iPhone 6s and earlier, iPad, or iPod touch: Press and hold both the Home and the Top (or Side) buttons at the same time. Keep holding them until you see the connect to iTunes screen.
     
4. When you see the option to Restore or Update, choose Update. iTunes will try to reinstall iOS without erasing your data. Wait while iTunes downloads the software for your device. If the download takes more than 15 minutes and your device exits the connect to iTunes screen, let the download finish, then repeat step 3.
   
5. After the Update or Restore completes, set up your device.

Without knowing if you have a recent backup, it’s recommended that you try the Update option first. Restoring will erase your iPhone and return it to factory settings, so you’d only want to do that after exhausting all other possibilities.

I hope this helps to get your iPhone 8 back up and running.

Aug 27, 2018 11:33 AM

So, if that does not work? I’ve tried update first and that did not work. Trying restore brought the phone back with limited functionality, and will either go to a loop of the black screen or a loop of the press home to update until I restore it again.

Oct 8, 2018 5:58 PM

Nov 15, 2018 6:07 PM

So when it goes to the boot loop or the press home button to upgrade screen if you restore it again it’ll work ?

Dec 2, 2018 11:59 AM

I have tried this so many times and it still hasn’t worked, I will add my home button is broken but I’ve still done these steps and it isn’t working I have no idea what to do

Dec 24, 2018 1:47 PM

My iPhone is stuck on the white screen and it’s press home to upgrade

Feb 7, 2019 12:41 PM

IPhone 8 was turning on and off repeatedly. I connected the iPhone to iTunes to upgrade the IOS version. Now the iPhone is stuck on “Press home to upgrade”

Feb 15, 2019 6:18 PM

I had this problem too. Just connect your phone to iTunes, then press the side button until it turnes off. The. Press the side button after it turns off and press the volume down button when the apple logo appears. Then select restore because update will just make it do the same thing again.

Mar 15, 2019 10:01 PM

Question: Q: iphone 8 stuck on press home to upgrade More Less

Источник

Как войти в DFU-режим на iPhone со сломанной кнопкой «Home»?

Привет, Друзья! Очередная инструкция для тех пользователям iOS-устройств, которые столкнулись с проблемой входа в режим DFU из-за неработающей кнопки «Home», «Power» или обеих сразу.

Напомним, что DFU-режим не только поможет избежать ошибок iTunes при перепрошивке джейлбрейкнутого iPhone, например, но и просто необходим при выполнении самого процесса джейлбрейка iPhone или iPad.

Хоть и отличаются iДевайсы от большинства конкурентов исключительным качеством и надежностью, в процессе эксплуатации iPhone, особенно, может возникнуть неприятность в виде повреждения механических органов управления, кнопки «Home» или «Power». Как все мы уже знаем, для того, чтобы ввести iOS-девайс в режим DFU, обе эти кнопки должны быть исправными. Что же делать тем, у кого одна или обе кнопки не работают или повреждены?

Можно конечно обратиться в авторизированный сервисный центр для замены поврежденного органа, дело это не бесплатное и учитывая сложность самого процесса (ремонтопригодность iPhone 5s по iFixit составляет всего 6 баллов из 10 возможных) выльется владельцу в «копеечку».

Не спешите расстраиваться, пользоваться iPhone можно и со сломанной кнопкой «Home», аппарат благополучно управляется на программном уровне и все необходимые манипуляции с гаджетом можно благополучно выполнять и в обход кнопки «Домой». Выключить, перезагрузить iPhone и ввести его в DFU-режим можно и со сломанными кнопками.

Сама процедура ввода iPhone в DFU Mode (он же DFU-режим) очень проста и не требует от владельца iOS-устройства особых навыков. На программном же уровне без «танцев с бубном» не обойтись.

Механизм ввода iPhone со сломанной кнопкой «Home» в DFU Mode

Сам механизм достаточно прост:

Использовать DFU Mode можно на свое усмотрение, но актуален он, чаще всего, при джейлбрейке iPhone или iPad.

Для того, чтобы перевести iPhone со сломанной кнопкой «Home», к примеру, в режим DFU понадобится:

1. Файл актуальной версии iOS для вашей модели аппарата;
2. Утилита redsn0w (желательно последней стабильной версии);
3. Компьютер с установленным iTunes;
4. Минут 10 свободного времени.

Скачать redsn0w для Windows и Mac OS X: [ссылка]

Условимся, что все изложенные выше требования вами выполнены и можно приступить непосредственно к процессу.

1) Запустите утилиту redsn0w;

2) Перейдите по пути: Extras -> Even more –> DFU IPSW;

3) Выберите файл с официальной прошивкой и нажмите «OK«;

4) Дождитесь, пока redsn0w создаст кастомную прошивку для вашей модели iOS-девайса. Отличить кастомную прошивку от оригинальной можно будет по названию, к названию официальной прошивки в кастомной будет добавлена приставка «ENTER_DFU_«;

5) Запустите iTunes, в основном окне программы с информацией о вашем аппарате удерживая кнопку «Shift» на Windows (Option на Mac) щелкните на кнопке «Восстановить«;

6) Дождитесь окончания процесса восстановления, по прошествии которого ваш аппарат будет включен в режиме DFU;

7) Используйте DFU-режим для джейлбрейка iPhone при помощи той же redsn0w. Как сделать это на конкретном примере мы поговорим в другой раз.

Видео «Как войти в DFU-режим на iPhone со сломанной кнопкой «Home»?»

Использовать iPhone со сломанными кнопками все-таки можно, это накладывает ряд ограничений и неудобств, однако с этим можно жить. Если у вас возникли вопросы или сложности в процессе ввода iPhone в DFU Mode, обращайтесь к нам в комментариях к инструкции, мы постараемся вам помочь.

Источник

iPhone Stuck on Press Home to Upgrade in iOS 15? 4 Ways to Fix it

“My iPhone 11 was turning on and off repeatedly. I connected the iPhone to iTunes to upgrade the iOS version. Now the iPhone is stuck on press home to upgrade. How to fix it?”

Currently, Apple has released the latest iOS 15 and many iOS users have upgraded their devices to the newest iOS system. However, there are a number of users run into the problem that their iPhone is stuck on press home to upgrade, then the screen goes completely unresponsive or even crashes.

So far, Apple has officially acknowledged the bug and given its users some official advices. Read on and check out.

Way 1. Restart Your iPhone/iPad

If your iPhone is stuck on press home to upgrade when installing iOS 15, you can try to long press the Power button until the «slide to power off» appears on the screen. Slide it from left to right to shut down your iPhone or iPad. Wait for a shile, press and hold the Power button again until te Apple logo shows up.

If the iPhone is still stuck on press home to upgrade after rebooting, repeat the above steps and restart your device for 4 to 5 times. If luckily, it will show up the passcode entering screen.

Way 2. Force Restart iOS Devices

If a nomal restart didn’t help to fix this issue, you can choose to force restart your iOS device. The steps varies from different devices:

For iPhone 8 and later: Quickly press and release the Volume Up button > Quickly press and release the Volume Down button > Press and hold the Side button when the Apple logo appears.

For iPhone 7 or 7 Plus: Press and hold the Sleep/Wake button and the Volume Down button at the same time > Release the two buttons until you see the Apple logo.

For iPhone 6s and earlier: Press and hold the Home button and the Sleep/Wake button at the same time > Release both buttons when the Apple logo shows up.

Way 3. Restore iPhone with iTunes

If it doesn’t work after force reboot, you can try to restore your iPhone or iPad with iTunes to bypass the issue. It is important to note that once the system is restored, all the original data on the phone will be erased, such as the contacts, SMS, music, videos and other content. If you have finally decided to restore the system after conscious deliberation, follow the steps below:

Open iTunes and ensure it is running the latest version. If not, you can go to Apple’s website and download the latest one.

Using an USB cable to connect your iPhone to computer. At this time, the computer cannot recognize the device, you need to follow the steps in Way 2 to force restart it.

After that, iTunes will detect that your iPhone is in Recovery Mode. And you will see the option to «Restore» or «Update». Tap on «Restore» to carry on the process.

Way 4. Fix iPhone Stuck on Press Home to Upgrade without Data Loss

Some iOS bugs could also cause the upgrade issues, thus it is a good idea to try with a reliable and safe iOS repair tool to fix this kind of system issues on iPhone, iPad and iPod touch. FoneGeek iOS System Recovery is regarded as one of the most appreciate tools that you can rely on. It is totally safe to use and offers the most convenient way to fix iOS upgrade issues. Below are the core features of FoneGeek iOS System Recovery:

• This tool is dedicated to fix a variety of iOS issues for iPhone, iPad and iPod Touch, such as iPhone upgrade failed, iPhone is stuck on black/white screen, recovery/DFU mode, etc.
• The existed data on your device will not be affected after the fixing process.
• It supports the newest iPhone 11/12 running iOS 15, iOS 14, etc.
• It offers intelligent interface which is easy for you to use.

How to fix iPhone stuck on press home to upgrade with FoneGeek iOS System Recovery:

Step 1. Download, install and launch this iOS repair tool on your computer, and select «Standard Mode» from the home interface.

Step 2. Connect your iPhone/iPad to computer via an USB cable and click on «Next». The program will prompt you to enter the DFU or recovery mode, just follow the on-screen instructions to do that.

Step 3. Once your device is recognized by the program, click «Download» button to locate and download the corresponding firmware package for your device model.

Step 4. Once the firmware is downloaded successfully, click on «Fix Now» and the program will begin repairing the device. After that, you device will get out of Press Home to Upgrade screen.

Conclusion

We have collected all the potential tutorials that will be helpful for you to fix iPhone stuck on press home to upgrade issue. If none of them being workable for you, you can take advantage of FoneGeek iOS System Recovery to bypass this issue without data loss.

As a professional writer who is interested in technology, Edwin J. Parke has helped thousands of users by offering various tips to solve their problems.

Источник