Rode микрофон для iphone wireless go

Лайфхак: как подключить RODE Wireless GO к iPhone?

Лайфхак: как подключить RODE Wireless GO к iPhone?

Нам часто задают вопрос как подключить радиосистему RODE Wireless GO к iPhone?

Все очень просто, помимо стандартного переходника Lightning to 3.5mm Headphones (важно: переходник должен быть оригинальным) — нужен специальный адаптер RODE SC4 или кабель RODE SC7. Оба варианта имеют специальный TRRS разъем для совместимости с смартфонами. Данный вариант подключения подойдет для всех моделей iPhone.

Так как изначально данная радиосистема «заточена» под работу с цифровыми камерами для съемки репортажа или какого то обзора, RODE все же предоставляет возможность подлючения системы к iPhone благодаря обширним аксессуарам в виде различных кабелей которые вы можете докупить отдельно.

RODE SC4 — Адаптер переходник с разъёмом TRS (мама) и TRRS (папа), подходит для подключения микрофонов Rode серии VideoMic к смартфонам и планшетам
К кабелю который входит в комплект с радиосистемой (красный кабель с двумя черными разъемами) Wireless GO вы подключаете адаптер SC4 — а серый разъем подключаете в переходник Lightning to 3.5mm Headphones


RODE SC7 — Патч кабель TRRS (папа) на TRS (папа), длина 17 см, подходит для подключения микрофонов Rode VideoMic GO и VideoMicro к смартфонам и планшетам
— Вместо кабеля который в комплекте с радиосистемой вы подключате кабель SC7 — черным разъемом в приемник Wireless GO, а серый разъем подключаете в переходник Lightning to 3.5mm Headphones

Комментарии

Не комментариев. Будьте первым, кто оставит комментарий.

Источник

Wireless GO

Wireless GO

The Wireless GO is an ultra-compact wireless microphone system that is unique in its clip’n’go versatility and incredibly compact form-factor. The transmitter features an in-built omnidirectional condenser capsule and can be used as a clip-on mic or with a RØDE lavalier, sending crystal-clear, broadcast-grade audio via 2.4GHz digital transmission to the on-camera receiver. It’s the perfect wireless mic solution for content creators in all disciplines: filmmakers, on-camera presenters, newsgatherers, vloggers and more.

  • Transmitter operates as a clip-on microphone or beltpack for a lavalier/headset microphone.
  • Ultra-compact form-factor – transmitter and receiver weigh a minuscule 31g each.
  • Series III 2.4GHz digital wireless transmission with 128-bit encryption delivers crystal-clear audio under any conditions and excels in dense Wi-Fi and Bluetooth environments (shopping malls, conventions, hotels etc).
  • Up to 70m range (line-of-sight), optimised for short-range operation in congested RF environments.
  • In-built rechargeable batteries that last up to 7 hours, charged via USB-C.
  • Super easy to use – transmitter and receiver auto-pair in under three seconds.
  • 3-stage output pad (0dB, -12dB and -24dB) and battery saver mode.
  • Use up to eight systems in one location.
  • Comes in either black or white.
  • Designed and made in RØDE’s precision manufacturing facilities in Sydney, Australia.

Источник

RODE Wireless GO II

Начнем по порядку и постараемся написать полезную статью о НОВОЙ двухканальной беспроводной микрофонной системе для одновременной записи двух источников звука.

В данной радиосистемы 2 трансмиттера микрофона, один ресивер, который подключается к вашей камере. Идет 3 кабеля USB T ype-C для зарядки и передачи информации. Один кабель разъем SC5 (3,5 мм TRS на TRS) который вставляется в камеру и в ресивер микрофона. Чехол для хранения и ветрозащита.

Подключение к камерам

Используйте прилагаемый кабель SC5 для подключения беспроводного GO II к камерам и другим устройствам с 3,5-мм TRS-входом. Если вам нужно подключить микрофон к устройству с XLR-входом, используйте адаптер типа VXLR Pro.

Подключение к компьютерам

Используйте прилагаемый кабель USB-C — USB-A для подключения беспроводного приемника GO II к любому компьютеру с входом USB-A (используйте кабель USB-C-USB-C для компьютеров с входом USB-C), затем перейдите в настройки звука и выберите «Wireless GO II RX» в качестве устройства ввода. Это, по сути, превращает Беспроводной приемник GO II в беспроводной аудиоинтерфейс USB.

Подключение к мобильным устройствам

Для подключения Wireless GO II к смартфону или планшету вам понадобятся дополнительные кабели. Для устройств iOS с входом Lightning используйте вспомогательный кабель SC15 Lightning беспроводной GO II сертифицирован MFi, что означает, что он будет легко взаимодействовать с любым устройством iOS. Для Android и других устройств с входом USB-C используйте кабель SC16 USB-C to USB-C.

(Получается, что-бы подключить Wireless GO II к смартфону или планшету необходимо дополнительно приобрести кабель от RODE это SC15 Lightning для iPhone и для Android кабель SC16 USB-C to USB-C. Либо использовать переходник с разъёма TRS на разъём TRRS с стандартным переходником Lightning или Type -C )

Самое главное отличие от Wireless GO первого поколения это два микрофона в комплекте, который позволяет записывать двухканальное аудио, к примеру если вы снимаете интервью с двумя людьми. Первый человек пишется в первый канал, а второй человек пишется на второй канал. Получается Rode Wireless GO 2 позволяет записывать каждый микрофон по отдельному каналу и потом при обработке вы сможете отцепить эти два канала друг от друга переконвертировать в моносигнал и сделать свою пост обработку. То есть Wireless GO II дает возможность записывать либо в режиме «слияния», либо в режиме «разделения». Это позволяет записывать каждый передатчик на отдельные каналы на выходе или объединять их в один выход.

Чтобы переключиться между режимами «слияние» и «разделение», нажмите и удерживайте обе кнопки на приемнике в течение трех секунд и следите за измерителем выходного уровня на светодиодном экране.

Еще не менее важная офигенная фишка , теперь появилась возможность писать высококачественный звук на встроенную память микрофона. В двух этих микрофонах есть своя встроенная память типа флешки на 3,6 гигабайта и туда пишется ваша аудиозапись. Вы можете выбрать два режима записи СЖАТЫЙ (Standard Quality (Compressed) и НЕСЖАТЫЙ (Broadcast Quality (Uncompressed )

Сжатый режим (Standard Quality (Compressed) позволит записать на каждый передатчик более 40 часов сжатого звука.

Несжатый (Broadcast Quality (Uncompressed) в этом режиме беспроводной передатчик GO II записывает в несжатом формате WAV и использует 24-битный аудиопоток 48 кГц. В этом режиме устройство может хранить около 7 часов звука.

Читайте также:  Камера айфон против андроид

У беспроводных микрофонов существует одна из проблем — это разрыв связи с ресивером который подключён к вашей камере когда вы поворачиваетесь спиной к камере на определенном расстоянии. Ваше тело блокирует сигнал и в результате ваша аудиозапись испорчена.

Но теперь с Wireless GO II вас это не ждет, так как аудиозапись можно записать на встроенную память и в случаи, когда оборвется сигнал вы всегда сможете достать свою внутреннюю запись с микрофона и синхронизировать ее. Это просто Супер

На какой дистанции прерывается сигнал у Wireless GO II если человек будет повёрнут спиной к камере куда подсоединён ресивер. На расстоянии до 5 метров прием сигнала отличный, после 10 метров уже начинаются помехи, но если повернутся к камере лицом, то запись восстанавливается и все четко без помех записывает. И вот в этой ситуации опять вспомним и отдадим оды благодарности разработчикам, что они так выручили и сделали возможность записи звука на микрофон. И теперь при помощи этой фишки можно уходить на дальнее расстояния порядка 200-250 метров, иногда это бывает актуально.

Еще о чем важно знать, что в дальнейшем 24-битный аудио звук может быть интерполированный в 32-битный формат.

Wireless GO II имеет гибкие регуляторы усиления, которые позволяют точно настроить выход приемника, чтобы избежать обрезки или искажений в вашем записывающем устройстве.

По поводу ветрозащиты, ее доработали и теперь она крепится при помощи поворота, сидит очень плотно и случайным движением ее не выбить. Обязательно пользуйтесь ветрозащитой она спасает запись от нежелательного шума ветра.

И теперь главное, что необходимо сделать после покупки Rode Wireless GO II — это скачать программу на официальном сайте Rode — RED Central для Mac или Windows .

Что дает программа RED Central ?

RØDE Central предоставляет вам доступ к основной информации о GO II, включая:

-Уровень заряда батареи

-Версия прошивки (с возможностью обновления)

-Место для хранения (только передатчики)

-Часы (с возможностью синхронизации с подключенным устройством)

RØDE Central позволяет активировать и управлять целым рядом функций и функций беспроводного приемника GO II, включая:

-Точная регулировка усиления (доступна только через RØDE Central)

-Режим записи слияния/разделения

-Канал безопасности (доступен только через RØDE Central)

RØDE Central также позволяет активировать и управлять целым рядом функций и функций беспроводного передатчика GO II, доступных только через приложение, включая:

-Режим записи в сжатом/несжатом виде

-Режим отключения звука блокировки и маркера

-Включение/выключение режима низкой чувствительности

-Регулировка яркости светодиода

-Запись воспроизведение, оптимизация и экспорт

Источник

Wireless GO II

Dual Channel Wireless Microphone System

The world’s smallest and first truly wireless microphone has been reborn. The Wireless GO II is an ultra-compact and extremely versatile wireless microphone system consisting of a dual channel receiver and two transmitters. Incorporating the same unique form factor and professional sound quality as the original Wireless GO with groundbreaking, patent-pending technology, the Wireless GO II is the perfect microphone for a wide range of content creation applications.

The Wireless GO II boasts a range of powerful features, including universal compatibility with cameras, mobile devices and computers, extended range (200m line of sight) and improved transmission stability, on-board recording capabilities, and much more. This is next generation wireless audio.

  • Dual channel wireless microphone system for recording two sound sources simultaneously
  • Series IV 2.4GHz digital transmission, 128-bit encryption – crystal-clear audio at up to 200m (line of sight), optimised for extremely stable operation in dense RF environments
  • 3.5mm TRS analog output, USB-C and iOS digital output – universal compatibility with cameras, mobile devices and computers
  • On-board recording – over 40 hours of internal memory
  • Option to record each channel separately or combine them for ultimate flexibility in post-production
  • Safety channel, flexible gain control (three-stage pad, expandable to 10-stage)
  • In-built rechargeable lithium-ion battery – up to 7 hours battery life
  • Designed and made in RØDE’s precision manufacturing facilities in Australia

Unmatched Versatility

The Wireless GO II takes wireless versatility to new heights. Featuring a 3.5mm TRS analog output for plugging into cameras, plus a digital audio output via USB-C for plugging into smartphones, tablets and computers, it is perfect for content creation, filmmaking, on-camera or on-stage presentations, vlogging, YouTubing, livestreaming and more.

On-board recording means you never have to worry about dropouts or audio issues again, while the flexible gain control lets you precisely tailor the output to your device. The Wireless GO II also offers the option to record each channel separately or combine the two, ensuring ultimate flexibility in post-production.

Ultra-Compact Wireless Audio

The Wireless GO II offers the same pocket-sized form factor as the original Wireless GO. The transmitters and receiver weigh less than 32g, taking up virtually no space in a camera kit bag, backpack, handbag or briefcase. It also comes supplied with a handy carry pouch to keep everything tidy and secure. The Wireless GO II’s unique clip design makes it quick and easy to mount onto clothing or a camera cold shoe, mobile camera rig, boom pole, or any cold shoe accessory – ultra-compact wireless audio for any recording situation.

Professional Sound. Seamless Connectivity

The Wireless GO II has been designed to deliver professional-quality sound while being incredibly simple to use. The transmitters and receiver come auto paired, ensuring a seamless set-up process every time. RØDE’s Series IV 2.4GHz digital transmission with 128-bit encryption delivers a range of up to 200m (line of sight) and is optimised for extremely stable operation in areas with a high level of RF activity, including dense urban environments, shopping malls, universities, convention centres and offices.

Each transmitter features a high-quality in-built omnidirectional condenser capsule for completely wireless recording, plus a 3.5mm TRS input for plugging in a lavalier microphone. The Wireless GO II is also supplied with twist-and-lock furry windshields for recording in windy or adverse weather conditions. Crystal-clear, professional sound in any situation.

RØDE Central

RØDE Central is an easy-to-use desktop and mobile companion app for the Wireless GO II that allows you to configure your device settings anywhere, unlock advanced features, optimise and export recordings (desktop only), access device information, and update to the latest firmware. Download it for free to unlock the full potential of your Wireless GO II.

Note: OS Requirements – MacOS 10.13 or later; Windows 10 Version 1803 or later; iOS 14 or later; Android 9.0 or later.

RØDE Connect

RØDE Connect is a free podcasting and streaming software solution that is now compatible for use with the Wireless GO II. RODE Connect makes it easier to record or stream with professional-quality audio from your computer.

RØDE Connect allows up to four physical guests, with two Wireless GO II’s, to be connected to a single computer. It features an intuitive, easy-to-use interface inspired by the RØDECaster Pro.

Note: OS Requirements – MacOS 10.13 or later; Windows 10 Version 1803 or later.

Compatible Accessories

Lavalier GO

Interview GO

MagClip GO

The SC17 is a Hi-Speed 1.5m USB-C to USB-C cable for connecting the Wireless GO II receiver to computers and devices with a USB-C input.

The SC18 is a Hi-Speed 1.5m USB-C to USB-A cable for connecting the Wireless GO II to computers and devices with a USB-A input.

The SC19 is a high-quality 1.5m-long USB-C to Lightning Accessory Cable designed to connect the Wireless GO II receiver to iOS devices.

FlexClip GO

The FlexClip GO is a set of three clips that allow for maximum versatility for transmitter placement. It includes the MagClip GO, CrossClip and VampireClip.

COLORS 2

COLORS 2 is a set of four coloured windshields, cable identification rings, tags and a sticker sheet for use with the Wireless GO, Wireless GO II, Lavalier GO and smartLav+.

Lavalier GO

Interview GO

MagClip GO

The SC17 is a Hi-Speed 1.5m USB-C to USB-C cable for connecting the Wireless GO II receiver to computers and devices with a USB-C input.

The SC18 is a Hi-Speed 1.5m USB-C to USB-A cable for connecting the Wireless GO II to computers and devices with a USB-A input.

The SC19 is a high-quality 1.5m-long USB-C to Lightning Accessory Cable designed to connect the Wireless GO II receiver to iOS devices.

FlexClip GO

The FlexClip GO is a set of three clips that allow for maximum versatility for transmitter placement. It includes the MagClip GO, CrossClip and VampireClip.

COLORS 2

COLORS 2 is a set of four coloured windshields, cable identification rings, tags and a sticker sheet for use with the Wireless GO, Wireless GO II, Lavalier GO and smartLav+.

Specifications

Acoustic & Electrical Specifications

macOS 10.11 above

Windows 10 and above

Mechanical Specifications

TX Length: 44 Width: 45.3 Height: 18.3

RX Length: 44 Width: 45.5 Height: 18.3

Box Contains

2 x Transmitters

3 x Furry Windshields

3 x SC20 USB-C to USB-A Cables

1 x SC5 TRS to TRS Memory Cable

1 x Carry Pouch

Downloads

Datasheet
Quick Start Guide
Declaration of Conformity
UKCA Declaration of Conformity

Click below to find out more about this product.

Yes. This is possible using the supplied SC5 cable or any other TRS to TRS cable and the VXLR Pro or VXLR+ adaptor to convert the signal. You can even use the SC11 splitter cable and two adaptors to break out the Wireless GO II’s two channels onto separate output jacks for dual channel recording.

The Wireless GO II’s windshields feature a twist-and-lock bayonet connector, which ensures an extremely strong connection. To attach them securely, align the two white dots on the windshield with the black dots on the receiver, then push the windshield down and twist to lock it in place. Reverse the process to remove them.

The Wireless GO II’s fine gain control can be enabled/disabled via RØDE Central. To activate it, open RØDE Central, plug in the receiver, navigate to the settings page, and toggle the ‘Gain Mode’ button to ‘Fine’. This will expand the Wireless GO II’s three-stage pad to a 10-stage pad, which goes from 0dB to -30dB in 3dB increments. It also gives you access to an extra 6dB of gain reduction, which is useful if you have a particularly sensitive camera or recording device. Read more about the gain control at the Wireless GO II Learning Hub.

RØDE’s Series IV digital transmission delivers an increased range of 200m and improved transmission stability, particularly in environments with lots of RF activity (such as dense urban areas, shopping malls, universities and convention centres).

The Wireless GO II transmitters are capable of recording over 24 hours of compressed audio or 7 hours of uncompressed audio each. Once storage on the device is full, the oldest saved recordings will be overwritten. Recordings can be accessed, optimised, exported, and deleted via RØDE Central. Find out more about on-board recording via the Wireless GO II Learning Hub.

No, the Wireless GO II is not currently compatible with the original Wireless GO.

RØDE Central is a companion app for the Wireless GO II that allows you to control all of the functions of the transmitters and receiver, update firmware, and access features such as on-board recording, the fine gain control and safety channel. To download and find out more about RØDE Central, head to the Wireless GO II Learning Hub.

The Wireless GO II and original Wireless GO share the same compact form factor, unique cold shoe clip, in-built microphone, and easy-to-use design. However, the Wireless GO II is a dual channel wireless microphone system, which consists of two transmitters and a single receiver. It also offers an extensive feature set that make it extremely versatile, including both an analog 3.5mm TRS output for plugging into cameras and a digital audio output via USB for plugging into smartphones, tablets and computers, on-board recording, 200m range with improved transmission stability, flexible gain controls, safety channel, complete control over all features and functions via RØDE Central, and much more.

The Wireless GO II gives you the option to either record in ‘Merged’ or ‘Split’ mode (toggled by pressing and holding the pair and gain buttons on the receiver for three seconds or via RØDE Central). This allows you to record each transmitter onto separate channels on the output (‘Split’ mode) or combine the two into a single output (‘Merged’ mode). When it’s in ‘Split’ mode, there will be two output level meters, when it’s in ‘Merged’ mode, there will be just one. Read more about this at the Wireless GO II Learning Hub.

When activated, safety channel mode will record a second track of audio at -20dB as a backup in case your sound source gets loud unexpectedly and causes the main channel to distort. To enable safety channel mode, open the RØDE Central app, plug in the Wireless GO II receiver, navigate to the settings screen, and click the ‘Safety Channel’ toggle (note: this can only be activated in ‘Merged’ mode). Read more about the safety channel at the Wireless GO II Learning Hub.

The Wireless GO II features a digital audio output via USB-C, which allows you to record directly into any smartphone, tablet, or computer without the need for adaptors or other audio interfaces. The Wireless GO II comes with three USB-C to USB-A cables for charging and also connecting to computers with a USB-A input. To connect to a computer, Android smartphone or tablet, or any other device with a USB-C input, you will need a USB-C to USB-C cable, such as the RØDE SC16. To connect to an iOS device, such as an iPhone or iPad, you will need a Lightning Accessory Cable (USB-C to Lightning) cable – either the RØDE SC15 or SC19. The Wireless GO II is MFi-certified, meaning it will interact seamlessly with all iOS devices.

The Wireless GO II’s on-board recording function is enabled and disabled via the RØDE Central app. To activate it, plug in the transmitter(s), navigate to the settings screen and toggle the ‘Record’ button to either ‘Always’ or ‘Backup’. In Always’ recording mode, the transmitter will start recording audio as soon as it is switched on and will continue recording until it is switched off, regardless of whether is it connected to the receiver. In ‘Backup’ recording mode, the transmitter will start recording audio when it connects to the receiver. When the receiver is switched off, the recording will stop.

When on-board recording is enabled, a red ‘REC’ icon will appear on that transmitter’s channel on the receiver. These recordings can be accessed, optimised, exported, and deleted via RØDE Central. Read more about on-board recording at the Wireless GO II Learning Hub.

To connect the Wireless GO II to your iOS device, you need an MFi-certified ‘Lightning Accessory Cable’. This is different to the ‘charge and sync’ cable that may have been included with your Apple device and other standard USB-C to Lightning cables. The RØDE SC15 is an MFi-certified Lightning Accessory Cable and is recommended for use with the Wireless GO II for best performance.

When using RØDE Central on a Mac device the Operating System Requirements are 10.13 or later.

When using RØDE Central on a Windows device the Operating System Requirements are Windows 10 Version 1803 or later.

Reverting to an older version of RØDE Central is as simple as uninstalling your current version of RØDE Central and installing the version you want to return to. Version 1.1 of RØDE Central can be found here for Mac and Windows.

Wireless GO II

Download

To download your free copy of the software, we require a valid email address. RØDE will only email you regarding the software: bug-fixes, software updates etc. If you would like to receive new product information and news from RØDE, click the box below.

Current version is 1.2.4

Freedman Electronics Pty Limited ABN 91 000 576 483 trading as RØDE Microphones (‘we’, ‘us’ or ‘our’) collects personal information about you in order to provide you with information about the software, including information about bug-fixes and software updates. If you tick the box to opt in, we will also collect personal information about you to provide you with new product information and news from RØDE.

If you do not provide this information, we cannot provide you with information about the software, or new product information and news from RØDE.

The information you provide will be collected by or on behalf of us and may be disclosed to third parties that help us deliver our services (including information technology suppliers, communication suppliers and our business partners) or as required by law.

We may disclose your personal information to third parties outside of Australia who provide services to us, including to service providers in the USA.

Our Privacy Policy is available at www.rode.com/privacypolicy and explains: (i) how we store and use, and how you may access and correct your personal information; (ii) how you can lodge a complaint regarding the handling of your personal information; and (iii) how we will handle any complaint. If you would like any further information about the our privacy policy or practices, please contact us at privacy@rode.com.

If you are a resident in the European Economic Area (EEA), you have rights under data protection laws in relation to your personal information, including the right to request access to your personal information, the right to request correction of your personal information, the right to request erasure of your personal information, the right to object to processing of your personal information, the right to request restriction of processing your personal information, the right to request transfer of your personal information, and the right to withdraw consent. If you wish to exercise any of the rights set out above, please contact us at privacy@rode.com.

By providing your personal information to us, you consent to the collection, use, storage and disclosure of that information as described in the Privacy Policy and this collection notice.

Источник

Читайте также:  Как открыть зип файл айфон
Оцените статью