Sensors on the iphone

SensorLog 4+

Log and Stream Sensor Data

Bernd Thomas

• • 4.4 • 31 Ratings

• • $4.99
  • Offers In-App Purchases

Screenshots

Description

Log and Stream Sensor Data

With SensorLog you can read out sensor data of your iPhone, iPad and Apple Watch.

The sensor data (csv or JSON format) can be saved to file, streamed via TCP/UDP, or send as HTTP GET/POST request.

iPhone und iPad Logging:

— Sensor data can be sampled with up to 100Hz (depending on the version of your iOS device and fore or background mode).

— Sensor data can be streamed in server or client mode supporting TCP and UDP protocol. Streaming is supported up to 100Hz depending on the network speed and the receiving client or server configuration.

— Via HTTP(S) GET/POST request sensor data can be sent in JSON (POST) or form-url encoded (GET and POST) format to a REST API. Up to 20Hz upload rate is supported depending on the network speed and receiving server configuration.

Apple Watch Logging:

— Logging Option 1: Logging duration up to 1 hour
Supports logging of all selectable sensor data with up to 50Hz in background. Higher sampling rates up to 100 Hz are possible by selecting less sensors. Streaming (only client modus, TCP) and HTTP requests are supported.

— Logging Option 2: Logging duration greater 1 hour
While in background only logging of accelerometer data with up to 50Hz is supported. In foreground logging of all sensors with up to 100Hz is supported. Streaming and HTTP requests are only supported in foreground.

— Streaming is supported up to 100Hz depending on the network speed, the receiving server configuration, and chosen logging option. A coupled iPhone with LAN/WAN access is required

— Via HTTP(S) GET/POST request sensor data can be sent in JSON (POST) or form-url encoded (GET and POST) format to a REST API. Up to 10Hz upload rate is supported depending on the network speed and receiving server.

The following data of the iOS framework (iPhone, iPad) is provided by SensorLog (depending on the device version):
— CLLocation: latitude, longitude, altitude, speed, course, verticalAccuracy, horizontalAccuracy, floor (please note: this is not GPS raw data!)
— CLHeading: heading.x, heading.y, heading.z, trueHeading, magneticHeading, headingAccuracy
— CMAccelerometer: acceleration.x, acceleration.y, acceleration.z
— CMGyroData: rotationRate.x, rotationRate.y, rotationRate.z
— CMMagnetometerData: raw magneticField.x, magneticField.z, magneticField.z
— CMDeviceMotion: yaw, roll, pitch, rotationRate, userAcceleration, attitudeReferenceFrame, quaternions, gravity, magneticField, heading, magneticField.accuracy
— AVAudioRecorder: peakPower, averagePower (decibels)
— Core ML Model output (supported type int, double, string, dictionary)
— CMMotionActivity: Activity, activity.startDate, activity.confidence
— CMPedometer: numberOfSteps, startDate, distance, endDate, pedometerAverageActivePace, pedometerCurrentPace, pedometerCurrentCadence,
floorsAscended, floorsDescended
— CMAltimeter: relativeAltitude, pressure
— logging of WIFI and network carrier IP addresses
— logging of the device orientation
— logging of battery level
— labelling of the logged data

On the Apple Watch SensorLog supports logging of the following data:
— CLLocation: latitude, longitude, altitude, speed, course, verticalAccuracy, horizontalAccuracy, floor
— CMAccelerometer: acceleration.x, acceleration.y, acceleration.z
— CMDeviceMotion: yaw, roll, pitch, rotationRate, userAcceleration, attitudeReferenceFrame, quaternions, gravity, magneticField, heading, magneticField.accuracy
— CMMotionActivity: Activity, activity.startDate, activity.confidence
— CMPedometer: numberOfSteps, startDate, distance, endDate, floorsAscended, floorsDescended
— CMAltimeter: relativeAltitude, pressure
— Battery information

Machine Learning:
SensorLog supports Core ML models created with Apple’s Create ML app. Simply log data with SensorLog, train a model on the data in Create ML, load the exported model in SensorLog, and log its prediction with SensorLog. Supported Create ML models are: Activity Classifier, Tabular Regressor, and Tabular Classifier.

Источник

Touchscreen Test 4+

Vishal Singh

Для iPad

• • Бизнес: № 12 в этой категории
• • 4,4 • Оценок: 28

• • 99,00 ₽

Снимки экрана

Описание

This is a very useful and straight forward app to ensure that the touchscreen of your phone works fine.

• Touch Screen Test — This Test will help ensure that you phone’s touch screen works fine.
• Multi Touch Test — This test will help ensure that multi touch gesture of your phone’s touch screen works fine.
• Pinch,Move,Rotate — This test will help ensure that Pinch, Move and Rotate gesture of your phone’s touch screen works fine.
• Brightness — This test will help ensure that brightness of your phone’s touch screen works fine.

Some Additional Features :

▶ Sound You’ll be able to check if your phone’s earpiece, speaker, headphone, microphone and vibration are functioning correctly. No need to make any calls to check phone’s earpiece and microphone/speaker, with this app you can check these components directly.

▶ Camera You’ll be able to check back/front Camera, turn on face detection switch to test if your camera correctly detects face. Also you’ll be able to check flashlight of your phone.

▶ SENSORS You’ll be able to check which sensors are supported by your phone and test if the supported sensors are working correctly on your phone like accelerometer, gyroscope, magnetometer and proximity sensor.

You can also generate report and share with others.

Источник

X-Sensor 4+

Pocketkai

Designed for iPad

Screenshots

Description

X-Sensor shows various types of data and for that uses all available sensors. Map, time, date, weather data (temperature, air humidity, air pressure, wind speed, wind direction), compass, goniometer, bubble level, ruler, stop watch, moonphase and more funtions. The main functions are displayed clearly on the screen.

Functions and Display:
1) round chart with actual location (also bigger in 2nd window)
2) Time, date (analog/digital)
3) Compass
4) Goniometer
5) Temperature, air humidity (on your location)
6) Barometer (in mb, hPa, Torr or psi)
7) Wind wheel shows actual wind-speed
8) Cog wheel as sweep hand (w/o further function)
9) Bubble level, Click=Calibration center
10) Moonphase
11,12,13) Battery status from 0 to 100%

Further functions:
— Altimeter (GPS)
— GPS Ready display
— Ruler (Click: bottom left)
— Update button for weather data, moonphase and map
— Turnaround = bigger map

Settings:
— Temperature in °C or °F
— Barometer in mb, hPa, Torr, psi
— Wind speed in KPH oder MPH or .
— Compass (GPS or Sensor)

Hints:
— Displaying actual weather data, means at the moment of calling the data.
— Compass bases on GPS (at motion) or the internal compass sensor of the iPhone
— Internet connection needed for weather data and moonphase

System:
— iPhone or iPod Touch, iPad with OS 8.0 or higher
— Internetconnection

Источник

X-Sensor 4+

Pocketkai

Designed for iPad

Screenshots

Description

X-Sensor shows various types of data and for that uses all available sensors. Map, time, date, weather data (temperature, air humidity, air pressure, wind speed, wind direction), compass, goniometer, bubble level, ruler, stop watch, moonphase and more funtions. The main functions are displayed clearly on the screen.

Functions and Display:
1) round chart with actual location (also bigger in 2nd window)
2) Time, date (analog/digital)
3) Compass
4) Goniometer
5) Temperature, air humidity (on your location)
6) Barometer (in mb, hPa, Torr or psi)
7) Wind wheel shows actual wind-speed
8) Cog wheel as sweep hand (w/o further function)
9) Bubble level, Click=Calibration center
10) Moonphase
11,12,13) Battery status from 0 to 100%

Further functions:
— Altimeter (GPS)
— GPS Ready display
— Ruler (Click: bottom left)
— Update button for weather data, moonphase and map
— Turnaround = bigger map

Settings:
— Temperature in °C or °F
— Barometer in mb, hPa, Torr, psi
— Wind speed in KPH oder MPH or .
— Compass (GPS or Sensor)

Hints:
— Displaying actual weather data, means at the moment of calling the data.
— Compass bases on GPS (at motion) or the internal compass sensor of the iPhone
— Internet connection needed for weather data and moonphase

System:
— iPhone or iPod Touch, iPad with OS 8.0 or higher
— Internetconnection

Источник

X-Sensor 4+

Pocketkai

Designed for iPad

Screenshots

Description

X-Sensor shows various types of data and for that uses all available sensors. Map, time, date, weather data (temperature, air humidity, air pressure, wind speed, wind direction), compass, goniometer, bubble level, ruler, stop watch, moonphase and more funtions. The main functions are displayed clearly on the screen.

Functions and Display:
1) round chart with actual location (also bigger in 2nd window)
2) Time, date (analog/digital)
3) Compass
4) Goniometer
5) Temperature, air humidity (on your location)
6) Barometer (in mb, hPa, Torr or psi)
7) Wind wheel shows actual wind-speed
8) Cog wheel as sweep hand (w/o further function)
9) Bubble level, Click=Calibration center
10) Moonphase
11,12,13) Battery status from 0 to 100%

Further functions:
— Altimeter (GPS)
— GPS Ready display
— Ruler (Click: bottom left)
— Update button for weather data, moonphase and map
— Turnaround = bigger map

Settings:
— Temperature in °C or °F
— Barometer in mb, hPa, Torr, psi
— Wind speed in KPH oder MPH or .
— Compass (GPS or Sensor)

Hints:
— Displaying actual weather data, means at the moment of calling the data.
— Compass bases on GPS (at motion) or the internal compass sensor of the iPhone
— Internet connection needed for weather data and moonphase

System:
— iPhone or iPod Touch, iPad with OS 8.0 or higher
— Internetconnection

Источник