Question: Q: Can’t see TC in network drive-Windows 10
I recently purchased a new 2TB TC for my office work and was going to use it mainly as a network drive. However after setting up the TC with the airport utility I can’t seem to find it in the network drive section in This PC(Finder). I could see the drive in the airport utility setting but not in This PC and my old TC worked with my other windows computer. Im running WIndows 10. Could anyone please advice?
Airport Time Capsule 802.11ac, Other OS, Windows 10
Posted on Sep 20, 2015 2:19 AM
Win10 is having issues with the TC.. I am not usre if it is just the latest model or all of them but there are several posts now of fundamental network issues between win10 and the TC.
In explorer type the address directly into the address bar using IP not name.
so \\10.0.1.1 if it at default.
The setup utility for windows is inadequate to handle later Airports.. Apple have not bothered to update now for a long time and apparently no longer care. You need to use Mac or iOS version airport utility to do it.
Posted on Sep 20, 2015 2:45 AM
All replies
Loading page content
Page content loaded
Win10 is having issues with the TC.. I am not usre if it is just the latest model or all of them but there are several posts now of fundamental network issues between win10 and the TC.
In explorer type the address directly into the address bar using IP not name.
so \\10.0.1.1 if it at default.
The setup utility for windows is inadequate to handle later Airports.. Apple have not bothered to update now for a long time and apparently no longer care. You need to use Mac or iOS version airport utility to do it.
Sep 20, 2015 2:45 AM
Thanks for replying so swiftly. Turns out that if you use the map network drive option in This PC and enter //(timecapsulename)/(timecapsulediskname)
than it will show up in This PC
Sep 20, 2015 2:56 AM
Some with Windows 10 are unable to write/read files to/from Time Capsule. Some have no problems at all. If you would please I’d like you participate in an Win 10 experiment: Save a file, any small file or picture would do, to Time Capsule, then read it, then finally delete it. If you can and are willing to do this, what was the outcome?
And finally, what version Windows 10 are you running, 32-bit or 64-bit?
Sep 20, 2015 10:14 AM
If you are still having problems this solution worked for me using Windows 10 and letting me access the Time Capsule to use as a mapped network drive. I found the solution at this link:http://techsupport.foreverwarm.com/time-capsule-windows
I did both set of these steps in this order:
try setting your WINS server to the ip address of your TC. This can be done by:
- Click on the “Start” button;
- Click on “Network Connections”;
- Select your wireless network device; (or your wired network card if you are using an ethernet connection)
- Click on the “Internet Protocol TCP/IP” Properties;
- Click on the ‘Advanced” tab;
- Then click on the “WINS” tab.
- Enter IP address of your TC
- Hit Ok, Ok, Ok.
Then I did this
6. If you are mapping a drive from the computer that is running the Airport Utility, select the Airport Base Station agent on your task bar and click the name of your Time Capsule. Under Action select Connect with Password , put in your password and click the Remember this password box. Click OK.
7. From any other computer, go to My Computer and in the address bar enter \\
8. At the username/password prompt, enter the username “admin” and the password you used for Disks access.
9. You should now see the empty Data drive
10. If you want to map to this drive directly, right-click on it and select Map Network Drive . Be sure to select Connect using a different username and enter the username/password you used to get to the Time Capsule, in the format timecapsulename\username and your password.
If you’ve made it this far, CONGRATULATIONS!
Источник
Проблемы с доступом на AirPort Time Capsule
Windows 10 Корпоративная 2016 с долгосрочным обслуживанием (также закачал сегодня в нее все обновления)
Mac OS Sierra 10.12.5
Apple AirPort Time Capsule A1470
Белый ip
У меня есть статический ip и тайм капсула от apple. Я хочу, чтобы эта капсула была видна по интернету на компьютере с windows.
1) По локалке через мак ос (работает):
В проводнике название тайм капсулы сразу появляется.
2) По локалке через винду (работает):
(а) Если я вбиваю в винде в адресной строке проводника «\\10.0.1.1», потом вбиваю логин и пароль, которые спрашиваются, то все хорошо.
(б) Если после правой кнопкой мыши на значке компьютера я выбираю «подключить сетевой диск» и с галочкой «использовать другие учетные записи» набираю «\\10.0.1.1\Data», потом вбиваю логин и пароль, которые спрашиваются, то все хорошо.
3) По интернету через мак ос (работает):
Если выбираю в меню проводника «переход > подключение к серверу», вбиваю «static_ip», (который сам преобразуется в «afp://static_ip»), потом вбиваю логин и пароль, которые спрашиваются, то все хорошо.
4) По интернету через винду (НЕ работает):
Пробовал по аналогии с (а), ничего не выдает.
По аналогии с (б) получил ошибку 0x80070035. При нажатии «Диагностики» пишет:
Обнаруженные проблемы:
«ресурс общего доступа к файлам и принтерам (static_ip) Обнаружено доступен в сети, но не отвечает на попытки подключения»
И если мышкой навести на эту надпись, то всплывет следующее:
«Удаленный компьютер не отвечает на подключения через порт 445; вероятная причина – параметры политики безопасности или брандмауэр, либо же компьютер может быть временно недоступен. Проблемы, связанные с работой брандмауэра на данном компьютере, не обнаружены.»
Пытался гуглить, но так и не справился(((
Если по локалке работает, то ведь по интернету тоже должно.
Скажите, плиз, что нужно сделать? Какие скрины мне выложить? Может быть какие-то действия более детально описать?
Источник
Windows не видит apple time capsule
Time Capsule & AirPort Extreme
- В теме действуют все Правила форума и 10 заповедей новичка, кому тяжело осилить Правила Форума
- Обсуждение устройств, не относящихся к данной теме, запрещено. Если нужной вам темы по конкретной модели не существует — создайте её.
- Вместо слов «Спасибо!» используйте
. Если у Вас меньше 15 постов — нажмите на кнопку «Жалоба» под тем сообщением, где Вам помогли, и напишите благодарность.
- Полезные темы на заметку: FAQ по форуму, Как искать на форуме?, Как убирать изображения под спойлер.
В теме нет куратора. По вопросам наполнения шапки обращайтесь к модераторам раздела через кнопку «Жалоба» под сообщениями, на которые необходимо добавить ссылки, или через QMS.
Сообщение отредактировал M|A|G — 04.06.20, 19:43
Ronin200777, не совсем понятно.
Какое чудо ты купил Apple Time Capsule 802.11n или Apple Time Capsule 802.11ac?
Через что, к чему и как чудо подключено?
Сообщение отредактировал vadim_1984 — 25.02.14, 22:13
TimeCapsule (в моем случае 3Тб, стандарт ac, ростест) просто улет. Просто. Тариф 100 Мбит — так вот ноутбук по воздуху эти 100 Мбит выдает. По проводу тоже, но кому теперь нужен провод.
Сообщение отредактировал billybons2006 — 19.08.14, 13:00
улыбаемся и машем :rofl:
стенки и перекрытия у всех разные, ну зависит ещё от соседей и состояния эфира (другте сети, бытовая техника) — поэтому данные будут всё равно некорректными.
основные проблемы TC c протоколом l2tp (например — beeline) c которым она не может работать как роутер, но проблема решаема — достаточно обычного роутера который будет поднимать l2tp, а уже к нему подключаем TC в режиме точки доступа (AP)
не ведемся на строчку в характеристиках TC — VPN Passthrough (IPSec, PPTP, and L2TP) или транзитная пересылка VPN (IPSec, PPTP и L2TP), там речь про то что l2tp можно поднять только на компьютере — VPN, используя ТС, как беспроводной мост, но как роутер использовать не получится.
То есть при конструкции провайдер (l2tp) -> TimeCapsula -> MacBook Pro интернет удастся получить только на MBP. ТС будет смотрет на трафик провайдера со стороны, не принимая никакого участия, но будет исправно работать AP — то есть к ней можно подключаться, сливать бекапы и прочее, но без интернета. А при конструкции провайдер (l2tp) -> роутер (дружит с l2tp) -> TimeCapsula -> MacBook Pro интернет достанется всем.
Источник
Question: Q: Win 10 PC access to Time Capsule Disk
When I was using my Airport Time Capsule as a router I could access it’s disk with the file manager on my Win 10 PC. I recently started using a different router and set my Airport to Wireless Network Mode-Off and Network Router Mode-Off(Bridge Mode). Since I did that I am unable to access the disk. My Airport shows up in File Manager
However, when I click on it I get this window
The name is correct.
I’ve tried the Diagnose but that doesn’t help.
I used this to transfer files between my IMAC and my PC.
I sure would like to use it again.
Any ideas would be appreciated.
AirPort Time Capsule 802.11ac, Windows 10, null
Posted on Jun 21, 2018 2:27 PM
Open a command window and ping the address.. if it responds then you have to turn SMB1 back on.
IMHO.. it means using the TC as intermediate between mac and windows is now not a great idea.. there is no reason over the network you cannot directly connect windows to Mac using SMB2 or higher.
SMB1 was used by wannacry ransomware.. it is a bad idea to turn it on permanently.
Posted on Jun 21, 2018 3:54 PM
Helpful answers
It will not show up as a disk in file explorer. Or in Finder more than likely. Especially since the very latest versions of windows and Mac OS have changed a fair bit and ramped up security.
Are you running High Sierra with latest patches?
If not tell me exactly what Mac OS you are on?
A friend has my Win10 laptop so I am going to need to work from one of the desktop machines around the house.
I have set this up for other people .. so let me see how I go with doing it for latest configuration of Mac and windows.
House is undergoing renovations so this might take a day or two.
But the basics is to turn on SMB sharing.
Note the stuff about windows..
Use a short name and 8-20 character password which should be identical on both computers.
Name is pure alphanumeric mixed case and numbers.. same with password.
Make sure the name of the Mac is also short, no spaces and pure alphanumeric.
Again you fix it under sharing. main screen, computer name.
Also remember it is generally easier to use IP addresses.
So in the PC type in \\10.0.1.106 (whatever is actual IP of the Mac)
From the Mac.. in Finder.. Go, Connect to Server, and type in SMB://10.0.1.105 (Use actual IP of the Win machine).
Expect all that will open is guest share folder (directory) on each.. you will be unlikely to see the whole directory structure.
Jun 22, 2018 2:07 PM
There’s more to the conversation
Loading page content
Page content loaded
A recent update of windows has caused issues by turning off SMB1.. it is a major security risk.
Just to check it is not something else instead of using the TC name.. use it’s IP address.
Find the IP from the Mac in airport utility.. eg 192.168.1.102
Then in windows explorer type in the address bar.. \\192.168.1.102 (replacing with the actual TC address).
Tell us how that goes.
Jun 21, 2018 2:36 PM
This is what I get
Jun 21, 2018 2:47 PM
Here’s what I get when I do it like you asked.
Jun 21, 2018 3:19 PM
Open a command window and ping the address.. if it responds then you have to turn SMB1 back on.
IMHO.. it means using the TC as intermediate between mac and windows is now not a great idea.. there is no reason over the network you cannot directly connect windows to Mac using SMB2 or higher.
SMB1 was used by wannacry ransomware.. it is a bad idea to turn it on permanently.
Jun 21, 2018 3:54 PM
Thank you much. I’ll work on the direct connection like you suggest.
Jun 21, 2018 3:55 PM
I’ve tried to connect these two machines to no avail. I’ve gone through several procedures I found on line to set up file sharing between PCs and MACs. Nothing works. I can ping each machine from the other satisfactorily but neither one is visible from the other. The MAC does not appear in file explorer and the PC does not appear in finder.
Jun 22, 2018 8:15 AM
It will not show up as a disk in file explorer. Or in Finder more than likely. Especially since the very latest versions of windows and Mac OS have changed a fair bit and ramped up security.
Are you running High Sierra with latest patches?
If not tell me exactly what Mac OS you are on?
A friend has my Win10 laptop so I am going to need to work from one of the desktop machines around the house.
I have set this up for other people .. so let me see how I go with doing it for latest configuration of Mac and windows.
House is undergoing renovations so this might take a day or two.
But the basics is to turn on SMB sharing.
Note the stuff about windows..
Use a short name and 8-20 character password which should be identical on both computers.
Name is pure alphanumeric mixed case and numbers.. same with password.
Make sure the name of the Mac is also short, no spaces and pure alphanumeric.
Again you fix it under sharing. main screen, computer name.
Also remember it is generally easier to use IP addresses.
So in the PC type in \\10.0.1.106 (whatever is actual IP of the Mac)
From the Mac.. in Finder.. Go, Connect to Server, and type in SMB://10.0.1.105 (Use actual IP of the Win machine).
Expect all that will open is guest share folder (directory) on each.. you will be unlikely to see the whole directory structure.
Jun 22, 2018 2:07 PM
Thank You. I really appreciate all your help. And take your time. Please
Jun 22, 2018 2:08 PM
Well the first bit of the test is easy.. but this computer is running El Capo.. and I suspect will be a lot easier than High Sierra.. do tell me what version you are running.
From Win10 1709 release.. I can see the whole Mac file structure.
I am having a lot less luck from the Mac side opening windows.. I think I will need to create a new local administrator.
Remember this is going to have trouble using the normal windows network login.. so create another user on the windows machine who is local admin. Maybe just turn on the guest account. That should at least give you some access.
The warning message I pointed out that windows stores its password under more security than Mac can handle makes this a lot more difficult from the Mac side.
Jun 22, 2018 3:42 PM
Running Sierra 10.12.6 up to date
Windows 10 Home 1803
I finally can access the disk in my TC. I’m not sure how that happened. I was going thru many different procedures to gain access to my MAC and during that process I did check the TC and it opened. One of the things I did though was turn on SMB1 on my PC. I don’t want to leave it on though so I still want to try to share with the computers.
I don’t have time now but tomorrow I’ll set up the accounts you talk about above. Again Thank you so much for your help.
Jun 22, 2018 4:01 PM
It is frustrating.
Windows side.. you will need to fiddle around.. It is windows after all.
I could not get even Guest to work..
Look up the details which involved going to management area for users in windows..
Type Lusrmgr.msc into start
Using this I discovered there is a difference between user name and account name.
You will need to set up carefully (don’t block yourself from your windows account).. but saving a fresh user and password could be a good idea.
So what looked like a username of Fred had an account name of Fred_2 .. I also changed its password.. now I can see it from the Mac.
Источник