Xiaoxiang bms android 4pda

Краткое описание:
Программа для управления детскими часами XunKids (Mi and Nokia), которая позволяет узнать где находится ваш ребенок, получить от ребенка находящегося в беде сигнал SOS.

Платформа: Android
Русский интерфейс: Нет
Разработчик: Xiaoxun Technology Co., Ltd
Страница приложения в магазине Mi-Store: XiaoXun

Версия: 1.1.76.13041 XiaoXun (Didjer)
Версия: 1.1.75.13000 XiaoXun (Lеshij)
Версия: 1.1.72.12823 XiaoXun (Lеshij)
Версия: 1.1.71.12669 [url=»XiaoXun [Android]
102132400″]XiaoXun (Lеshij)[/url]
Версия: 1.1.69.12552 com.xiaoxun.xun (dfgigger)
Версия: 1.1.62.11917 XiaoXun (AndyER03)
Версия: 1.1.51.11108 app_xiaoxun_1.1.51.11108.apk ( 58.54 МБ )

По вопросам наполнения шапки обращайтесь в QMS к Модераторам раздела или через кнопку «Жалоба» под сообщениями, на которые необходимо добавить ссылки.

Сообщение отредактировал Woertz — 23.11.21, 12:59

У меня часы с экраном. Сегодня попробовал впервые в жизни перевести приложение для андроид, взял самую свежую xiaoxun_app_1.1.4.7133.
Распаковал через Bat by Bursoft, потыкался в TranslatorApk, кое-что попрограммировал и получилась более-менее переведенная версия через Яндекс-переводчик.

Прикладываю свой strings.xml, в нем конечно всё очень страшно, но то что встречалось на экране озвучил по нормальному.
strings.xml ( 140.41 КБ )

Остались не переведенные всякие сообщения, если приложение установите — то увидите. Подскажите, где их искать?

Источник

Xiaoxiang bms android 4pda

Сообщение отредактировал Woertz — 23.11.21, 12:59

Источник

Xiaoxiang bms android 4pda

Table of Content

Xiaoxiang BMS / JBD-SP15S001 / JBD-SP05S002 jiabaida BMS / Ant BMS

AntBMS was added into the v2 (not yet released) of XiaoXiang BMS App.
Widgets support

iOS and Apple Watch App for Xiaoxiang / jiabaida (JBD) BMS: AppStore Link

With Xiaoxiang Xiaoxiang / jiabaida (JBD) BMS you can build simple Li-Ion or LiFePo4 battery packs. For camping, car, solar or e-bikes (see links below — my projects).

Xiaoxiang Xiaoxiang / jiabaida (JBD) BMS can be extended with an bluetooth adapter. It makes possible to:

NEW: Support for JBD-SP05S002 BMS
NEW: Saving / restoring BMS configs
access with PIN code to BMS and config section (only iOS)
show basic data on Apple Watch
simple logging of max voltage, current and power
enable and configure Balancer over the App (Config section)
calibrate charging, discharging and idle current
change BMS capacity setting
switch the battery on/off
monitor temperature
monitor battery voltage
monitor single cell voltage
check wheater cell is balanced or not
monitor charging and discharging current
monitor alarms

why does the App cost?

It is because of the Developer fee of Apple. But 1 CHF is not even a half cup of coffee.

can I program BMS over the app

not yet, this will come with V2.

My BMS can not be found

check if it is connected correctly. make sure no other application is currently using your bluetooth battery! can you find it with another Bluetooth device?

I have found a bug

Please create an issue on github. Create Issue

I would like to have feature XYZ

Please create an issue on github. Create Issue

The easiest way to get the Xiaoxiang BMS is to order it over Ali Express. Here some sellers: Smart BMS

Before you order, make sure you choose the right cell number and battery technology!

Sample VoltBox (Battery Pack) with 1kW capacity, 24V and mppt solar charger. perfect for camping. VoltBox Project link

100% Supported BMS’s pictures:

JBD-SP15S001 (LiIon)

JBD-SP05S002 (LiFePo4)

Источник

Endless Sphere

DIY Electric Vehicles and more..

Xiaoxiang Android app password

Post by rio9210 » Aug 15 2018 8:41am

Re: Xiaoxiang Android app password

Post by jbozur » Aug 15 2018 10:06am

But system not working like expected.

Re: Xiaoxiang Android app password

Post by rio9210 » Aug 15 2018 10:19am

But system not working like expected.

Re: Xiaoxiang Android app password

Post by thundercamel » Aug 20 2018 12:32pm

Re: Xiaoxiang Android app password

Post by rio9210 » Aug 22 2018 4:14am

Re: Xiaoxiang Android app password

Post by thundercamel » Aug 22 2018 9:46am

Re: Xiaoxiang Android app password

Post by rio9210 » Aug 24 2018 8:13am

Re: Xiaoxiang Android app password

Post by thundercamel » Aug 24 2018 12:35pm

Re: Xiaoxiang Android app password

Post by rio9210 » Aug 24 2018 6:24pm

Re: Xiaoxiang Android app password

Post by thundercamel » Aug 28 2018 9:18am

Re: Xiaoxiang Android app password

Post by Bg-electric-cycle » Aug 30 2018 1:07pm

Glad you got the password.

On the subject of this BMS, any dedicated thread to its use?

I don’t believe my BMS, can balance although maybe as I’ve now lowered the pack voltage while on Static balance perhaps now. Sitting on balance static with the B flashing.

Add. I pre purchase never realised the Xiaxiang Smart BMS, only balances odd or even cells cannot balance both at the same time. Sort of semi smart BMS.

Also are several unknowns as the instructions are very scant.

Re: Xiaoxiang Android app password

Post by evo1087 » Sep 07 2018 2:52am

Re: Xiaoxiang Android app password

Post by rio9210 » Sep 08 2018 3:16pm

Re: Xiaoxiang Android app password

Post by evo1087 » Sep 11 2018 4:41am

Re: Xiaoxiang Android app password

Post by thundercamel » Sep 11 2018 8:42am

Re: Xiaoxiang Android app password

Post by magicld » Nov 17 2018 2:27am

I’m the developer of the Xiaoxiang App for iOS and want to give you some Infos to the passcode problem of this BMS.

Please Note: I’m not in any form connected to the manufacturer of these BMS boards. I’ve developed the App just for fun and for my brother whom I build two 820Wh e-Bike batteries.

The problem is, that the SmartBMS (Xiaoxiang, jiabaida, JBD-SP15S0001, james@lithiumbatterypcb.com or however they are called) does not support PIN protection (at least the Boards I was rev-engineering)! They have just an simple interface to exchange data.

The protection layer (PIN) was supposed to be done on the Bluetooth dongle / module.

Now it comes: Before 2018/2017 the BMS was shipped with Bluetooth Dongles which could be programmed. It was possible to change the broadcast name (for example to: myBattery1 instead of Xiaoxiang BMS) and set the PIN!
But now – to save costs –factory pre-programmed Bluetooth Modules without EEPROM memory are delivered. So, no changes can be done like setting custom name or setting PIN on this Bluetooth dongle!

In my opinion, the only way to fully protect your BMS is to replace the Bluetooth Dongle with another one which can be configured (there are plenty on Aliexpress) like HC-06. But then again, if you get such one, you have to know how to use AT commands over Terminal (like AT+NAMEmyOwnBMS) and set other things like Service UUIDs (if you have the wrong one, the BMS will be not recognized by the Apps).
So not everyone can do this on his own.
Maybe if I get enough donations (Paypal: Lukas at Deszynski dot com) I will buy some hardware for testing and write a step-by-step guide how to do this + small software to automate the configuration.

For iOS Apps I will include in next release (v1.1.1) a semi-pin protection.
I will use for this purpose the BMS Name to store the PIN. When the name is like PIN:xxxxxx – then the iOS user will be asked to enter the PIN in order to manipulate the BMS.
NOTE: this will work only for iOS App. You will be still able to access the BMS from an Android device until you replace the Bluetooth dongle.

But If you have another Idea or know maybe undocumented command from the BMS to set the password – let me know.

Источник

Xiaoxiang bms android 4pda

Table of Content

Xiaoxiang BMS / JBD-SP15S001 / JBD-SP05S002 jiabaida BMS / Ant BMS

AntBMS was added into the v2 (not yet released) of XiaoXiang BMS App.
Widgets support

iOS and Apple Watch App for Xiaoxiang / jiabaida (JBD) BMS: AppStore Link

With Xiaoxiang Xiaoxiang / jiabaida (JBD) BMS you can build simple Li-Ion or LiFePo4 battery packs. For camping, car, solar or e-bikes (see links below — my projects).

Xiaoxiang Xiaoxiang / jiabaida (JBD) BMS can be extended with an bluetooth adapter. It makes possible to:

NEW: Support for JBD-SP05S002 BMS
NEW: Saving / restoring BMS configs
access with PIN code to BMS and config section (only iOS)
show basic data on Apple Watch
simple logging of max voltage, current and power
enable and configure Balancer over the App (Config section)
calibrate charging, discharging and idle current
change BMS capacity setting
switch the battery on/off
monitor temperature
monitor battery voltage
monitor single cell voltage
check wheater cell is balanced or not
monitor charging and discharging current
monitor alarms

why does the App cost?

It is because of the Developer fee of Apple. But 1 CHF is not even a half cup of coffee.

can I program BMS over the app

not yet, this will come with V2.

My BMS can not be found

check if it is connected correctly. make sure no other application is currently using your bluetooth battery! can you find it with another Bluetooth device?

I have found a bug

Please create an issue on github. Create Issue

I would like to have feature XYZ

Please create an issue on github. Create Issue

The easiest way to get the Xiaoxiang BMS is to order it over Ali Express. Here some sellers: Smart BMS

Before you order, make sure you choose the right cell number and battery technology!

Sample VoltBox (Battery Pack) with 1kW capacity, 24V and mppt solar charger. perfect for camping. VoltBox Project link

100% Supported BMS’s pictures:

JBD-SP15S001 (LiIon)

JBD-SP05S002 (LiFePo4)

Источник